oliver hydraulic pump factory

SUPER HIGH QUALITY WEBSTER DESIGN HYDRAULIC PUMP. THE PHOTO IS NOT EXACTLY THE SAME AS YOUR OLIVER PUMP, BUT YOU WILL RECEIVE THE SAME CESSNA DESIGNED PUMP THAT LASTED DECADES WILL BE SHIPPED TO YOU.

SUPER HIGH QUALITY ENGINEERED BRAND DESIGN HYDRAULIC PUMP. THE PHOTO IS NOT EXACTLY THE SAME AS YOUR PUMP, BUT YOU WILL RECEIVE THE SAME WEBSTER/HALDEX/REXROTH/BOSCH/CESSNA BRAND PUMP THAT LASTS DECADES.

Our New Replacement M-30-3023710 Hydraulic System Shield Cover is for Oliver 1755, 1855, 1955, 2255 and White 2-150, 2-85, 2-105 tractors. The first photo shows this shield mounted on our Oliver 1755 (sorry but this is our working tractor--not a show machine). This replaces Oliver/White part #30-3023710, Shield (for reference only). This is the shield that protects your hydraulic pump and fitting/hosed under the platform on the clutch petal side of the platform. It is a duplicate not only of the dimensions of the part, but relief cut geometry and radii, bend radii, number of spot welds, spot weld locations, and material thickness. What this means to you is once you install our cover, it will difficult to determine that it is anything but an original part that came on your tractor.  Included with your shield is 4 SEMS fasteners which have captive external tooth lock washers just like the originals used by Oliver/White. This will make the look of this shield as close to factory installed as possible.

Tractors today are becoming increasingly powerful with more and more hydraulic capacity, which is great for running all kinds of different implements or multiple machines at a time, allowing for better operations efficiency. But these big and powerful hydraulic systems come with one drawback, Back Pressure.

Back pressure occurs when hydraulic flow in the return line is restricted and causes a buildup of pressure backward through the line. This is undesirable as it robs the entire system of potential flow as the pump now has to produce more power to overcome the back pressure. Hydraulic motors in particular cannot handle excessive back pressure and will prematurely fail if exposed for any length of time.

Free flowing return for hydraulic motors. Back pressure is most commonly caused by routing the return line back through the pump spool and valve block, this is very useful if we need to have double action (such as in a hydraulic cylinder) but not necessary for a hydraulic motor that is only turning one direction. by taking the return line from the motor and returning it directly back into a reservoir tank, we make sure that the hydraulic flow can return completely unrestricted.

Reducing back pressure will increase the life of your implements, reduce load on your hydraulic pump, and save your motor seals, o-ring, piston and scraper rings.

The rugged construction and extra-thick pump casing of Ramparts air driven diaphragm pumps stand up to the abuses of the most demanding sludge and slurry

applications. They overcome the “high-wear” problem commonly found in double diaphragm and progressive cavity pumps. Air Driven Diaphragm pumps are capable

of operating dry on suction lifts up to 20 feet (6.5 m) and handling liquids with solid contents up to approximately 70%. Depending on pump model, they will

pass up to 3" (76 mm) diameter spherical solids. (Solids size is determined by check valve type.) Pump stroke rate, discharge stroke time, suction drive pressure

and discharge drive pressure can all be adjusted independently. Pumps will easily handle heavy sludges at their rate of accumulation in clarifiers and settling

Did your John Deere hydraulic pump give up on you? Need to fix your Cat hydraulic pump? Can’t find the replacement for your Case hydraulic pump or Massey Ferguson hydraulic pump? We’re here to help.

For everything from a tractor hydraulic pump to combine pumps, we sell brand new high quality hydraulic pumpsmade by the best manufacturers in the business! Our replacement parts are so good that we back them with an industry leading warranty.

To get started finding the exact hydraulic pumpyou need, choose your model from the dropdowns above. You can pick from a large range of machine types, including air compressors, combines, compact track loaders, cotton pickers, lawn mowers, generators, crawler tractors, bale machines, harvesters, log skidders, motor graders, sprayers, utility vehicles, windrowers and more. Then choose your machine’s maker from our expansive list. Here you’ll be able to find the tractor water pump you need, whether its a replacement for a new Kubota hydraulic pump, a used Ford tractor hydraulic pump, a hard-to-find JCB hydraulic pump, or an antique Allis-Chalmers hydraulic pump, we don’t discriminate! TractorJoe is proud to have the largest online catalog for ag hydraulic pumps around. So whether you need to replace a JD hydraulic pump, a IH hydraulic pump, or something else, chances are we are the best and most affordable way to get it fast.

For anything from aDavid Brown hydraulic pump, to a Oliver hydraulic pump or Yanmar hydraulic pump, people save up to 70% off dealer prices by shopping with us, plus our customer support team is second to none- so if you have a concern or a question with your tractor hydraulic pump, we are ready to help! Don’t lose another minute of work because your hydraulic pump gave up on you. Contact TractorJoe now and we will get you the pump you need to get back in business.