otc 4020 air hydraulic pump free sample

With shop air as the energy source, these pumps have the power and oil capacity (80 cu. in. usable oil) to drive even the large 55-ton rams. They are ideal all-around power sources for dozens of body, frame, and alignment applications. Also can be used with a variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI. An internal relief valve protects the hydraulic components regardless of hydraulic pressure.

Bring in the OTC Air/Hydraulic pump that can be used as an all-around power source for various frame, body, and alignment applications. The hydraulic pump consists of an internal relief valve that protects the hydraulic components of the pump regardless of the hydraulic pressure.

The pump can be used with a wide variety of rams, presses, and hydraulic pullers that operate at up to 10,000 PSI. The pump consists of two-stage release mechanism that reduces hydraulic shock and enables fast or metered ram return. The air pump needs 9 cfm at 100 PSI air pressure at the pump.

OTC 4020 Air Hydraulic Pump - Ideal all-around power source develops 10,000 PSI at 100 PSI air. 98 cu. inches of usable oil. Two-stage release mechanism; internal relief valve.

The ESCO Pro Series 1/2 Gallon Air Hydraulic Pump is specifically designed for automotive, light truck, and heavy-duty applications. This pump is constructed with the user in mind, as a compact lightweight air hydraulic pump solution that delivers a powerful punch; requiring only 80 PSI for 10,000 PSI of operating hydraulic pressure to power even the heaviest of cylinders, ram, bead breakers, and more. Built-in exhaust muffler promotes safer, quieter operation along with a robust foot pedal providing hand-free pumping and release of load. Manufactured with the highest of quality parts and components designed to withstand rigorous use in any environment. All ESCO air hydraulic pumps are designed with fully serviceable pump motors, allowing for economical repairs and maintenance. The aluminum reservoir is lightweight and durable for field, shop, and mobile applications.

It"ll maintain the pressure until you move the pedal to the release position. The only thing the air actually does is operate the oil pump. Once the hydraulic pressure is up to where you want it, the air pressure can be zero and it won"t affect the hydraulic side"s ability to maintain the pressure.

I would use a dedicated pressure regulator to supply air to the intensifier. The clamps you show are good for 5000psi while the intensifier will produce 10,000 psi oil @ 100psi air pressure. In a system like this, with a small overall volume, the intensifier can hit that 10,000 psi in the blink of an eye, so you don"t want to leave it to chance that you"ll always remember to set the air regulator to 50 psi or whatever is required to keep your oil pressure within acceptable limits.

From another perspective, it is worth the reduction in cycle time to fool with buying and installing all this stuff as compared to just using 3 screw operated toe clamps? I doubt you"d gain more than 10 seconds on the total cycle via hydraulic clamping as compared to turning the screws in 3 toe clamps a round or two apiece.