otc electric hydraulic pump quotation
OTC 4064 Vanguard� Two-Stage, High-Pressure Power Units - Thousands of users have put Vanguard to work in a variety of hydraulic power applications. And the reputation for trouble-free performance this pumping unit has earned is a proven, documented fact, not just a sales claim. Vanguard is a fast-acting, precision-built, two-stage pumping unit consisting of a gear pump for the low-pressure stage and an axial-piston pump for the high-pressure stage, the latter being �supercharged� by the gear pump. Vanguard delivers low volume at high pressure, yet provides high volume at low pressure for fast cylinder piston approach and return. Units feature a 10,000 PSI universal motor, which starts under full load. They are suitable for operation up to 10,000 PSI. Motor is 1-1/8 h.p., 12,000 RPM, (27 amp draw). Rated for intermittent duty. The 4064 Vanguard 2-stage hydraulic pump with 3-position/ 4-way valve and 6 ft. remote motor control (115V). 2 gal. of oil supplied.
They"re called “RamRunners” and that"s just what they do…run large single- or double-acting rams for fast frame straightening, wheel alignment, etc. They deliver up to 45 cu. in./min. at max. operating pressure of 10,000 PSI. The 4044 has a 2-position/2-way valve with “advance” and “return” positions and is for use with single-acting rams. The 4046 and 4057 have a 3-position/4-way valve with advance,” “hold,” and “return” positions; for use with double-acting or multiple single-acting rams. Nos. 4044 and 4046 are equipped with a 1/2 h.p. single-phase, 60 Hz, 115 volt thermal protected electric motor and are designed to start under load. No. 4057 has a 1-1/2 h.p. electric motor. The RamRunners also feature a 6 ft. remote control cord for “on/off” control. One gallon and two quarts of oil are supplied.
No. 4044 – RamRunner two-stage hyd. pump with 2-position/2-way manual valve and a 6 ft. remote control cord. Supplied with one gallon and two quarts of oil. Wt., 58 lbs.
They"re called “RamRunners” and that"s just what they do…run large single- or double-acting rams for fast frame straightening, wheel alignment, etc. They deliver up to 45 cu. in./min. at max. operating pressure of 10,000 PSI. The 4044 has a 2-position/2-way valve with “advance” and “return” positions and is for use with single-acting rams. The 4046 and 4057 have a 3-position/4-way valve with advance,” “hold,” and “return” positions; for use with double-acting or multiple single-acting rams. Nos. 4044 and 4046 are equipped with a 1/2 h.p. single-phase, 60 Hz, 115 volt thermal protected electric motor and are designed to start under load. No. 4057 has a 1-1/2 h.p. electric motor. The RamRunners also feature a 6 ft. remote control cord for “on/off” control. One gallon and two quarts of oil are supplied.
No. 4046 –RamRunner two-stage hydraulic pump with3-position/4-way manual valve for double-acting rams,and a 6 ft. remote control cord. Supplied with onegallon and two quarts of oil. Wt., 54 lbs.
- Aerial Lifts- Air Conditioning- Amusement Park Ride- Antique / Vintage Desk Top Fan Repair- Automotive- ABS Anti-Lock Brake Motor Repair- Air Conditioning and Heater Blower Motors- Automotive Generator- Convertible Top Motors- Radiator Fan- Starter- Sunroof Motors- Wheel Balancer- Window Motor- Windshield Wiper Motor- Wiper Motor- Autopsy Saws- Bleacher Motors- Blowers & Fans- Boat and Marine- Bowling Motors- Brake & Clutch Coils- Brake Motors- Bus Motors- Cast Saws / Cast Cutters- Centrifuge- Compressor Motors- Concrete Equipment- Conveyor- Crane & Hoist- Door Motors- Electric Motor Repair- Electric Vehicles- Elevator Motors- Fan Motors (see also Blowers and Fans)- Floor Equipment- Forklift- Gearmotor UPS Conveyor- Generators- Golf Carts- High Frequency, High Cycle- Hoists (see Cranes & Hoists)- Hose Reel- Hospital Equipment Motor Saw & Pump Rebuilding- Hydraulic Pump Repair- Hydraulic Pumps (also see pump motors)- Jukebox- Laundry Equipment- Log Splitter- Machinery Motors- Medical Equipment- Centrifuge Motor- Dental Equipment- Dialysis Equipment- Hospital Bed- Sternal Saw- Motorcycle- Paint Sprayers- Pallet Jacks- Pipe Machine Motor Repair- Pipe Threader- Player Piano- Plumbing and Sewer Equipment- Pool and Spa Motor Repair- Power Tools- Belt Sander- Bender- Cable Pullers- Cutting Tool- Drill- Magnetic Drill Press- Grinders- Hammers Breaker, Demo, Rotary- Impact Wrench- Mag Base Drill- Planer- Power Pump- Radial Arm Saw- Rebar Cutter- Router- Saws- Table Saw- Printing Equipment- Pumps- Radiology / X-Ray Motors- Refrigeration- Rental Equipment Electric Motor Repair & Parts- Restaurant Equipment- Robots- RV Motors and Generators- Sand Blaster- Scissor Lifts- Scooters- Servo Motors- Siren- Solenoid Coils- Spindles- Sporting Equipment- STRECHER, GURNEY, BED CYLINDER PUMP REPAIR- Switchgear / Charging Motor- Synchronous Motors- Tach- Servo- Tach Generator- Tach Rotor and Stator Rewinding- Transformer- Treadmills- Vacuum Motor- Vacuum Pumps- Valve Motors- Ventilator Motor Rebuilding- Vibrators- Washdown Motors- Welding Equipment- Wheelchair- Wheelchair and Scooter Gearbox Repair- Wheelchair Lifts- Wheelchair & Scooter Motor Rebuilding Dealer Guide- Wood Working Equipment- X-Ray / Radiology Equipment
OTC 4020 Air Hydraulic Pump - Ideal all-around power source develops 10,000 PSI at 100 PSI air. 98 cu. inches of usable oil. Two-stage release mechanism; internal relief valve.
RamRunner two-stage hydraulic pump with 2-position / 2-way manual valve and a 6 ft. remote control cord. Supplied with one gallon and two quarts of oil.