piggyback hydraulic pump for sale

The SPD2 series of pumps are special SP-25A series pumps with through shafts. The through shafts have 9 tooth internal splines at the rear and the pump’s rear cover has an integral SAE A-2 bolt mount pad. For double pump operation, a standard SAE A-2 boltsplined shaft pump can be directly mounted on the rear on the SPD2. Typical performance of the pump is the same as indicated for the SP-25A series pump.

Parker Commercial piggyback pump is a tandem pump that combines two or more pump frame sizes into one assembly. Dynaco offers three types of piggyback units. The original bearing type piggyback version, the Add-A-Pump and the phase two close couple model. The Add-A-Pump allows for any type of pump to be installed to the rear of the main pump. While the close couple type requires Dynaco 300 series pump added to the rear of the main pump, the bearing type requires another bearing type unit to be added to the main pump.

Genuine Metaris MH20 series bearing pumps & motors are available in 7 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs, dowelled assemblies & flow dividers are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH25 series bearing pumps & motors are available in 8 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs, dowelled assemblies & flow dividers are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH30/31 series bearing pumps & motors are available in 7 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs, dowelled assemblies & flow dividers are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH37 series bearing pumps & motors are available in 9 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs, dowelled assemblies & flow dividers are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH50/51 series bearing pumps & motors are available in 8 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs, dowelled assemblies & flow dividers are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH75/76 series bearing pumps & motors are available in 10 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs, dowelled assemblies & flow dividers are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH315 series bushing pumps & motors are available in 7 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs & dowelled assemblies are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH330 series bushing pumps & motors are available in 7 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs & dowelled assemblies are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH350 series bushing pumps & motors are available in 9 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs & dowelled assemblies are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Genuine Metaris MH365 series bushing pumps & motors are available in 8 different gear sizes with a variety of mounting flanges, shaft configurations and porting options. Multi-section units, piggyback designs & dowelled assemblies are all also available. Interchange with Commercial®/Parker®, Permco® and Muncie® gear pumps.

Originally established in 1972, we have seen continuous growth over the last 43 years at Hyseco, Inc. This has included multiple expansions, culminating in our full-service hydraulic gear pump and motor facility in the 1990s. Since then, we have maintained a large inventory of pumps, motors, and valves in-house, with both whole units and loose parts available to fulfill our customers’ requirements. Our team of experts backs up our products with exceptional customer service, ensuring smooth and trouble-free operation of every pump, motor, and valve we sell.

We offer a broad variety of styles and configurations of our pumps and motors. These include piston, vane, gerotor, hydrostatic, gear, and bushing types, available in single, double, triple, and piggyback configurations. We also stock a wide variety of high-quality parts. Our clients rely on us for pumps, valves, seal kits, fittings, and other hydraulic system parts for superior maintenance and replacements. In addition to stocking a broad range of standard pumps, motors, and valves, we are also a full-service machine shop. This allows us to provide in-house services such as porting and machining, as well as other fabrication services for our clients’ specialized and custom requirements.

Our deep level of experience in this area allows us to service fully every hydraulic product we sell. This includes preventative maintenance and troubleshooting for performance issues that may occur. We also maintain extensive repair and test facilities, with full pressure and flow testing available. Finally, our clients can rest assured that they can receive support whenever the need arises, as we maintain a 24-hour emergency call line for any pressing issues our customers encounter.

High-quality pumps, motors, and valves from Hyseco have played a vital role in demanding industries for decades. We have extensively worked for customers in the oilfield, offshore, construction, trucking, mining, petrochemical, and marine industries. Our products have been essential for multiple applications such as specialty equipment, filter carts, power units, lifts, presses, test stands, and many others.

We provide hydraulic components & repair services for industrial applications like paper mills, saw mills, steel mills, recycling plants, oil & gas applications and mobile applications, including construction, utility, mining, agricultural and marine equipment. This includes hydraulic pumps, motors, valves, servo/prop valves, PTOs, cylinders & parts.

UNITS WERE ASSEMBLED AS PART OF A HYDRAULIC TOP DRIVE POWER SYSTEM AND NEVER PUT INTO SERVICE. UNITS HAVE BEEN IN STROAGE FOR OVER 8 YEARS IN AN ENCLOSED SKID.

New, aftermarket Farmall 666 Hydraulic Pump with Piggyback Power Steering Pump for sale with a solid manufacturer warranty. In addition, we have a generous 30-day return policy if this item needs to be returned for any reason. Please see our Parts Warranty and Return Policy links for complete details before returning.

ABOUT THIS PAGE: You are viewing the product page for our International Farmall 666 hydraulic pump with piggyback power steering pump. As one of the largest suppliers of new and rebuilt International Farmall 666 tractor parts we most likely have the parts you need. Use the information above including the hydraulic pump with piggyback power steering pump part number and picture (if available) to assist you in making your decision to purchase. If you are looking for a different hydraulic pump with piggyback power steering pump, or have trouble locating the International Farmall 666 parts you need, we have MANY parts that are not listed on our website so feel free to contact us.

GPD Australia (Gear Pump Distributors Australia Pty Ltd) was established in February, 2003 to supply the Asia Pacific markets with Hydraulic Gear Pumps, Motors, Flow Dividers and Parts more efficiently and cost effectively.

Our expertise and extensive stock of hydraulic components and final assemblies allows us to offer a fast and efficient turn-around of new and re-manufactured units at short notice, keeping customer downtime to a minimum.

In essence  the term piggyback is when your using multiple pumps that are assembled or combine on one drive shaft. And the pump numbers listed above are usual for these pumps. Usually you will have a smaller section in the front and middle with the larger one in the back. You have different reservoirs and different fluids pumped into a piggyback system, with no worry of mixing fluids.

And the way the piggybacks are made will deliver greater outputs and efficiency. The most common uses of piggybacks are on utility vechiles, front end loaders and shovel loaders.