place diverter <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> factory

Bennet Marine duel action hydraulic pump designed for Place Diverter. Fits any year Place Diverter. Comes with a 5 year limited warranty (DO NOT get this confused with the Two Solenoid Pump designed for trim tabs)

place diverter <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> factory

PLACE DIVERTER & CONTROLS INC is the Original and Largest Jet Boat Drive Trim System Manufacturer in the United States and is the industry leader in Jet Boat Drive Systems, jet boat and jet drive service, jet pump repair, jet drive and boat parts, jet boat rebuilders and jet drive systems restoration, all jet boat manufacturers parts and service as well as marine parts and accessories.

The ‘PLACE DIVERTER’ is the first jet drive adjustable nozzle, designed to give the jet boat owner complete control of the boats bow attitude and to improve top-end jet boat performance. The capablities of adjusting the jet thrust up or down adds a new dimension of control and enhances the overall performance of the jet boat. So, whether your a racer, weekend warrior or wakeboarder, the up-down nozzle will provide the jet boat owner with unbelievable control, performance, safety, and fuel economy. This is the finest product available for the Berkeley style jet drive.

The “PLACE DIVERTER’ Is highly effective in improving the performance of your boat under varying loads and water conditions. It’s the jet boaters equivalent of trim for your drive, and the results are dramatic.

‘PLACE DIVERTERS’ are made to fit all major pumps including: Berkeley/Jetovator, Dominator, American Turbine, Legend, Jacuzzi, Aggressor, Barracuda, and Volvo Penta.

PLACE DIVERTER & CONTROLS INC also Manufactures a performance ride plate trim system for Mercury Sport Jets. The Mercury Trim System is easy to install and completely eliminates porposing, improves topend and controls the boats ride in varying water conditions.The system works excellent on the SugarSands and SeaDoo Sport Jets. Designed to fit the Mercury Sport Jet 175hp and greater.

place diverter <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> factory

These kits share all the great Place diverter features with the addition ofone The nozzle housings have been machined to accept Place diverter nozzleinserts These inserts allow you to tailor the nozzle exit size for maximumperformance. Includes 3-1/8" Red insert.

These kits share all the great Place diverter features with the addition ofone The nozzle housings have been machined to accept Place diverter nozzleinserts These inserts allow you to tailor the nozzle exit size for maximumperformance. Includes 3-1/8" Red insert.

These kits share all the great Place diverter features withthe addition of one The nozzle housings have been machinedto accept Place diverter nozzle inserts These inserts allowyou to tailor the nozzle exit size for maximum performance. Includes 3-1/8" Red Insert.

These kits share all the great Place diverter features with the addition of one. The nozzle housings have been machined to accept Place diverter nozzle inserts. These inserts allow you to tailor the nozzle exit size for maximum performance. Includes 3-1/8" Red Insert

These kits share all the great Place diverter features withthe addition of one The nozzle housings have been machinedto accept Place diverter nozzle inserts These inserts allowyou to tailor the nozzle exit size for maximum performance. Includes 3-1/8" Red Insert.

These kits share all the great Place diverter features withthe addition of one The nozzle housings have been machinedto accept Place diverter nozzle inserts These inserts allowyou to tailor the nozzle exit size for maximum performance. Includes 3-1/8" Red Insert.

These kits share all the great Place diverter features with the addition of one The nozzle housings have been machined to accept Place diverter nozzle inserts These inserts allow you to tailor the nozzle exit size for maximum performance. Includes 3-1/8" Red Insert.

This kit provides the freedom of instant control with theflip of a switch This unit travels its full range in approximately 2 seconds, and due to its hydraulic operation it is infinitely adjustable Each kit comes complete with ahydraulic diverter assembly, hydraulic pump, wiring harness,switch, and all necessary hydraulic fittings and lines.

This kit provides the freedom of instant control with the flip of a switch. This unit travels its full range in approximately 2 seconds, and due to its hydraulic operation it is infinitely adjustable Each kit comes complete with a hydraulic diverter assembly, hydraulic pump, wiring harness, switch, and all necessary hydraulic fittings and lines.

This kit provides the freedom of instant control with the flip of a switch. This unit travels its full range in approximately 2 seconds, and due to its hydraulic operation it is infinitely adjustable Each kit comes complete with an hydraulic diverter assembly, hydraulic pump, wiring harness, switch, and all necessary hydraulic fittings and lines.

This kit provides the freedom of instant control with the flip of a switchThis unit travels its full range in approximately 2 seconds, and due to itshydraulic operation it is infinitely adjustable Each kit comes complete with ahydraulic diverter assembly, hydraulic pump, wiring harness, switch, and allnecessary hydraulic fittings and lines.

This kit provides the freedom of instant control with the flip of a switchThis unit travels its full range in approximately 2 seconds, and due to itshydraulic operation it is infinitely adjustable Each kit comes complete with ahydraulic diverter assembly, hydraulic pump, wiring harness, switch, and allnecessary hydraulic fittings and lines.

This kit provides the freedom of instant control with the flip of a switchThis unit travels its full range in approximately 2 seconds, and due to itshydraulic operation it is infinitely adjustable Each kit comes complete with ahydraulic diverter assembly, hydraulic pump, wiring harness, switch, and allnecessary hydraulic fittings and lines.

place diverter <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> factory

Bennet Marine duel action hydraulic pump designed for Place Diverter. Fits any year Place Diverter. Comes with a 5 year limited warranty (DO NOT get this confused with the Two Solenoid Pump designed for trim tabs)

place diverter <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> factory

Boat Built for a family of skiers, this is an all fiberglass hull with ski storage and newer seats. All parts listed below are new: Marine grade wiring with starter fuse, main fuse and separate circuits at front of boat are fused individually, switches, battery, helm and steering cable, pitot tube and plumbing for speedometer, starter switch, hour meter, lighted compass, horn and switch, fire-extinguisher, glove box, DC power port, steering wheel, lights, bilge pump, carpet, Engine Only 67 hours on 454 Chevrolet (std. bore and stroke) with open-chambered oval port LS3 heads and Fel-Pro MLS gaskets, Edelbrock Performer RPM Air-Gap intake, MSD pro-billet distributer and coil, Demon 750CFM vacuum secondary marine carburetor, K&N marine flame-arrester/air filter, Comp Cams CB XM 270H-12 camshaft, Comp Cams dual valve springs/locks/retainers, Speed-Pro hypereutectic pistons and floating pins (9.5:1 compression with 117cc heads), , chromoly rings, Eagle I-Beam connecting rods, Clevite bearings, complete ARP stud and fastener kit for reciprocating assembly and heads, GM 7/16 pushrods, Crane roller rocker arms, Cloyes double-roller timing set, Melling HV oil pump, Holley 110GPH mechanical fuel pump, all fuel line is stainless braid with stainless AN fittings, water hoses and clamps, 7qt baffled oil pan with Fel-Pro one-piece gasket, all (except intake) fasteners are stainless socket head on engine and pump. Hardin Marine exhaust logs with new fittings, stainless clamps, hoses and flappers. Pump Berkley JG with 9-vane bowl and intake loader, all parts below are new: Hi-Tech Ultimate Wear Ring, “A” impeller that has been blueprinted and indexed, bearings and gaskets, Place electric/hydraulic diverter with helm controls and droop snoot, pressure bypass for cooling water, reverser cable and lever. Trailer Tandem axel with new tires, inner fenders and bunkboards. All items listed below are new: Bulldog coupler and jack, safety chains with rubber covers, wiring and four-way flat connector, LED lights including side markers and 3 light bar, hubs/bearings, spring shackle bolts/Teflon liners, tag mount/light, rear tie-down points/straps, powder coated wheels and winch strap/hook. Other Items included with boat are new custom trailer-able tarp, slip cover, four rubber fenders, expandable paddle, toss able cushion and ski flag. Lake test will be performed to insure boat meets buyers expectations. Shipping and Payment: Local pick up and cash only.

place diverter <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> factory

Rod (Hot rod) Place Diverter products carry a limited guarantee and the good folks there are happy to help .Thier (Place) warranty protocol is to contact them or a dealer try to diagnose and then they will direct you accordingly as to how to proceed . Bennett will not sell or deal direct to the the public (although i have had them give me a solenoid once before). One problem I have occasionally encountered recently is "factory overtightened" solenoids(they need only be tightened to a "very light seat". If you"d like to call me when you get a chance I"ll explain and help you trace & diagnose the problem your experiencing Tom 805 466 4719

place diverter <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> factory

Place Diverter & Controls is the Original and Largest Jet Boat Drive Trim System Manufacturer in the United States and is the industry leader in Jet Boat Drive Systems, jet boat and jet drive service, jet pump repair, jet drive and boat parts, jet boat rebuilders and jet drive systems restoration, all jet boat manufacturers parts and service as well as marine parts and accessories.

The "Place Diverter" is the first jet drive adjustable nozzle, designed to give the jet boat owner complete control of the boats bow attitude and to improve top-end jet boat performance. The capabilities of adjusting the jet thrust up or down adds a new dimension of control and enhances the overall performance of the jet boat. So, whether you"re a racer, weekend warrior or wakeboarder, the up-down nozzle will provide the jet boat owner with unbelievable control, performance, safety, and fuel economy. This is the finest product available for the Berkeley style jet drive.