power king tractor hydraulic pump in stock

Power King Economy Tractor Complete Hydraulic Unit. Complete working hydraulic system for early Economy Power King Tractors. It has been completely refurbished and contains everything needed to put on your tractor. I have included original belt for length but getting a segmented belt will make it a lot easier. Also included is lift rod not shown to lift plow if you have one. Every thing looks close to bran new. This unit was taken off a working tractor and hydraulic unit worked as it should. All parts were media blasted primed and painted.

Condition: Used, Condition: good, Type: Hydraulic unit, Brand: Economy Power King, Model: Early Economy Power King, Bundle Listing: No, Country/Region of Manufacture: United States

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday"s Tractor Co. products and within the Yesterday"s Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday"s Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Steiner Tractor Parts proudly offers a wide selection of tractor parts for vintage, old, classic farm tractors. We strive to not only offer the best selection of affordably priced tractor restoration parts, but to preserve the American agricultural heritage by helping you keep your old tractors running.We are focused on meeting all your restoration needs while offering value and quality with every tractor part we deliver.

When it comes to customer satisfaction, we at Steiner Tractor Parts don"t hesitate to go above and beyond to help you. Our website is not just an online store. It is a resource and a community of people who refuse to let our agricultural heritage disappear. We invite you to join us by subscribing to our popular blog, reading our tractor stories and enjoying some tractor trivia.

The tractor is built on the chassis and drivetrain of a 1965 Economy Power King tractor which was originally equipped with a 10 hp engine. Roman replaced the tractor"s original 2-in. frame with a 6-in. channel frame to handle the weight of the front and rear-mounted tools.

He kept the tractor"s original 8 by 30 by 16-in. rear tires and 4 by 12-in. front tires, but scrapped fenders, dash and grille in favor of replacements he fabricated out of 3/ 16-in. thick steel.

He made wood templates to get the correct angles and cylinder strokes for the back-hoe and loader, which he built from scratch. The backhoe, which is fitted with two big outriggers to keep it level on uneven ground, is controlled by two 16-in. stroke hydraulic cylinders with 3-in. bores. The loader is operated by three 16-in. stroke cylinders with 2-in. bores.

The 4-ft. wide loader bucket reaches 78 in. high so it"ll easily clear a dump truck for filling, Roman notes. Likewise, the back-hoe is "mammoth" for a tractor of this size, with a reach of 13 ft. from the center of the rear axle and capable of digging 8 ft. deep with its 16-in. wide bucket.

Mini Tractor With Loader,Backhoe TRACTORS Loaders 20-6-7 "It"s powerful, fast, reliable, and extremely maneuverable," says Ohio tractor dealer Peter Roman about a rugged mini tractor he built and equipped with big backhoe and front-end loader.The tractor is built on the chassis and drivetrain of a 1965 Economy Power King tractor which was originally equipped with a 10 hp engine. Roman replaced the tractor"s original 2-in. frame with a 6-in. channel frame to handle the weight of the front and rear-mounted tools.He repowered the tractor with a 14 hp Kohler engine and coupled a 6 1/2 gpm hydraulic pump and 4-gal. reservoir to it.He kept the tractor"s original 8 by 30 by 16-in. rear tires and 4 by 12-in. front tires, but scrapped fenders, dash and grille in favor of replacements he fabricated out of 3/ 16-in. thick steel.He made wood templates to get the correct angles and cylinder strokes for the back-hoe and loader, which he built from scratch. The backhoe, which is fitted with two big outriggers to keep it level on uneven ground, is controlled by two 16-in. stroke hydraulic cylinders with 3-in. bores. The loader is operated by three 16-in. stroke cylinders with 2-in. bores."Positioning the cylinder on the dump for the loader was one of the trickiest parts of the design," Roman says. "It had to be mounted so it would curl back to carry a load and tilt forward enough to dump it."The 4-ft. wide loader bucket reaches 78 in. high so it"ll easily clear a dump truck for filling, Roman notes. Likewise, the back-hoe is "mammoth" for a tractor of this size, with a reach of 13 ft. from the center of the rear axle and capable of digging 8 ft. deep with its 16-in. wide bucket.Contact: FARM SHOW Followup, Pe-ter Roman, 9026 Struthers Rd., New Middletown, Ohio 44442 (ph 330 542-2221).