power up gravity down hydraulic pump factory

Bucher power up/gravity down pump with 6 qt poly tank. Port size is 3/8" NPT.  Reservoir is 6.7" x 6.7" x 13". 1.25 gpm at 1,750 psi. Horizontal mount. Direct replacement for Light, Medium, and Heavy Duty dump kits.

The hydraulic pump is designed to be mounted horizontally or vertically – sight glass and dip stick can be switched on the round steel tank depending on the mounting direction of the pump to facilitate proper use. Dual location oil drain plugs are in easy to access positions regardless of pump orientation.

12-volt DC, 2 kW, 200-amp pump with sealed solenoid connections, to eliminate potential corrosion, produces an adjustable pressure up to 3200 PSI. 20-foot-long detachable pendant control has a magnetic base to easily attach to any metal location. Wires are protected with an all-weather jacket.

Description: 1 (One) Bucher (Monarch) hydraulic hoist pump - single acting (power up/gravity down) horizontal mount. Pump, motor, reservoir, valve, #6 SAE outlet and two button control. Standard pump used on Rugby hoists TB-14, or units requiring a large reservoir.

The only complaint I have was with the packaging for shipment. One of the main bolts was missing. It appears that the mounting bolts and washers are installed then hand tightened. In my box, the bolt was missing but the 2 washers and nut were there. Another nut and washer had come off of a second bolt. The box was in pretty bad shape when it arrived, and I"m sure that missing bolt escaped that way. I blame UPS, not PJ. But nonetheless, I was missing a bolt. It might be a better practice for future shipments to place all hardware in a sealed bag and attach that bag to the bracket. Preferably with some shrink or Saran type wrap. But that"s just my suggestion.

The hydraulic pump is designed to be mounted horizontally or vertically – sight glass and dip stick can be switched on the round steel tank depending on the mounting direction of the pump to facilitate proper use. Dual location oil drain plugs are in easy to access positions regardless of pump orientation.

12-volt DC, 2 kW, 200-amp pump with sealed solenoid connections, to eliminate potential corrosion, produces an adjustable pressure up to 3200 PSI. 20-foot-long detachable pendant control has a magnetic base to easily attach to any metal location. Wires are protected with an all-weather jacket.

BRI-MAR single cylinder hydraulic pump with remote and 2.5 gallon horizontal mount reservoir is a direct replacement for your single cylinder Bri-Mar dump trailer. Comes complete with solenoid, switch and remote with 20" Cable.

BRI-MAR twin cylinder hydraulic pump with remote and 4.5 gallon horizontal mount reservoir is a direct replacement for your twin cylinder Bri-Mar dump trailer. Comes complete with solenoid, switch and remote with 20" Cable.

BRI-MAR 4" Hydraulic Cylinder for 10,000 to 12,000 lb LP, LE and R series Dump Trailers. Accepts a 1" pin and center to center pin when compressed is 35-1/2". Max PSI for unit is 3,000 PSI.

BRI-MAR 3" Hydraulic Cylinder Seal Kit is the older version and was specifically designed to replace the seals and O-rings on a 3" hydraulic cylinder found on BRI-MAR trailers produced in 2012 or prior.

BRI-MAR 4" Hydraulic Cylinder Seal Kit is specifically designed to replace the seals and O-rings on a 4" hydraulic cylinder found on BRI-MAR trailers.

BRI-MAR Coil, 2-Way / 2-Position Magnet is an encapsulated coil designed for heavy duty hydraulic valve applications. Hole through center is 1/2" diameter.

BRI-MAR Remote with Cord is for the Power Up / Gravity Down function commonly found on hydraulic power units for dump bodies. Wiring harness has three wires come out the end: Black with ring terminal, white with a U-shaped terminal and a green wire.

BRI-MAR Remote with Cord is for the Power Up / Power Down function commonly found on hydraulic power units for dump bodies. Wiring harness has four wires come out the end: Black with ring terminal and white, red, and green, with a U shaped terminal.

BRI-MAR Steel Trailer Tongue Toolbox/Pump Box is designed to mount to the front of A-frame style BRI-MAR trailer. This toolbox/ pump box has pre-welded mounting brackets inside for a battery and holes in the box for wiring or hydraulic hoses. Measures 36.5" Wide x 19" Deep x 12.5" High

Dump Trailer Hydraulic Pump also named as hydraulic pump for dump trailer .Target Hydraulics 12V DC hydraulic pump for dump trailer/ Tipping Trailer applications in different countries such as UK, Germany, France, Australia, USA, Canada etc.

Lift Trailer Body, Push “up” button to start the motor to lift the Trailer by hydraulic cylinder, Push ”DW” button and the solenoid valve actives ,the cylinder lowering movement. Hydraulic oil back to tank and cylinder start closing. And dump trailer body start back to level position. Click technical data of single acting power unit troubleshooting you can learn.

It components by a high performance gear pump, a DC motor, a Aluminum Central Manifold, hydraulic cartridge valves and a hydraulic oil tank reservoir. There also come with a cable remote pendant or a wireless remote/radio remote to control hydraulic power pack .

This wireless remote works lets you operate your mini DC power pack from up to 200meters(650ft) without cables or switches. Just press the remote buttons and you’re ready to operate your small hydraulic power unit start and stop, make hydraulic cylinder in or out.

Wireless remote control receiver, two way non-power contact output, plastic shell, high sensitivity, strong anti-interference ability, widely used in industrial automatic control, power, motors, lights, security systems, such as, with convenient installation, safe and reliable, and other characteristics.

Our dump trailer pumps are widely use in different design of trailers, such as single acting hydraulic pump for dump trailer,heavy duty hydraulic pump for dump trailer,double acting hydraulic pump 12v dump trailer,etc

Dump trailer pumps are mainly 2 versions design, one is single acting, another is double acting. Both of them come with 2 buttons remote. We can also offer you customized ones.

Target Hydraulics manufacturer hydraulic valves, manifold blocks, and assembly dump trailer hydraulic pumps. Manifold endheads are 24 hours working, assembly hydraulic dump trailer work with the automatic production line.So, Our capability for dump trailer hydraulic pumps is fine.