power up gravity down hydraulic pump pricelist

The hydraulic pump is designed to be mounted horizontally or vertically – sight glass and dip stick can be switched on the round steel tank depending on the mounting direction of the pump to facilitate proper use. Dual location oil drain plugs are in easy to access positions regardless of pump orientation.

12-volt DC, 2 kW, 200-amp pump with sealed solenoid connections, to eliminate potential corrosion, produces an adjustable pressure up to 3200 PSI. 20-foot-long detachable pendant control has a magnetic base to easily attach to any metal location. Wires are protected with an all-weather jacket.

The only complaint I have was with the packaging for shipment. One of the main bolts was missing. It appears that the mounting bolts and washers are installed then hand tightened. In my box, the bolt was missing but the 2 washers and nut were there. Another nut and washer had come off of a second bolt. The box was in pretty bad shape when it arrived, and I"m sure that missing bolt escaped that way. I blame UPS, not PJ. But nonetheless, I was missing a bolt. It might be a better practice for future shipments to place all hardware in a sealed bag and attach that bag to the bracket. Preferably with some shrink or Saran type wrap. But that"s just my suggestion.

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

This hydraulic pump is a single-acting power unit for power up and gravity down. It has a 4-quart sturdy metal reservoir and is designed with a 12V DC motor that can provide strong power for hydraulic systems like dump trailers, forklifts, lifting platforms, etc.

This single-acting hydraulic power unit has a 12V DC motor (Power:1.6-3.0kw) and a 4-quart metal reservoir; it has SAE#6 ports with 3200 PSI max relief setting on A and 1500 PSI on B port. The flow rate is 2GPM. Rated speed: 2850 r/min.

Our hydraulic electric pump has been fully assembled. It comes with a hand-held remote control and 1 additional SAE#6 connector for replacement. The whole power unit is easy to wire and easy to operate.

With the powerful 12V DC electric motor, our hydraulic pump for dump trailers can start rapidly and provide quick oil output. In addition, it can provide strong power that will lift heavy objects in a short period.

You can rely on the quality of this electric hydraulic pump as it is made of special-treated sturdy metal, and the whole structure has been reinforced. It is also equipped with a powerful electric motor that you can use as often as you like.

All of our 12-volt hydraulic power units have been pre-assembled before delivery, and we provide instructions for operation so that you can install and use the hydraulic pump easily. Horizontal mount is recommended.

As a great power unit, this hydraulic pump can be used for many things, such as truck tailgate lift, RV leveling, scissor lift, dump trailers, lift truck, snowplow, aerial platform, road signs, material handling, wheelchair lifts, etc.

Bucher power up/gravity down pump with 6 qt poly tank. Port size is 3/8" NPT.  Reservoir is 6.7" x 6.7" x 13". 1.25 gpm at 1,750 psi. Horizontal mount. Direct replacement for Light, Medium, and Heavy Duty dump kits.

When deciding to purchase telescopic hydraulic cylinders, buyers are often tasked with choosing between single-acting and double-acting hydraulic cylinders. Learn what differentiates the two telescopic cylinder types to see which cylinder is best for your high-power hydraulic needs.

Offering a simple cylinder design with easy maintenance, single-acting hydraulic cylinders extend by relying on pressure from one side of the piston. The cylinders retract via gravity or weight of the load.

Double-acting cylinders provide more versatility than single-acting cylinders. Single-acting hydraulic cylinders have fluid pressure applied on one side of the piston, whereas double-acting cylinders have hydraulic fluid applied to both sides of the piston.

Know what you need? Check out our replacement telescopic hydraulic cylinders. We stock a wide selection of cylinders, well-suited for a variety of mobile equipment types and functions. We also manufacture custom telescopic cylinders built to spec.

14′ X 82″ Super duty bumper pull dump trailer, 14.9k GVWR, (2) 7k super lube axles, torsion axles, electric drum brakes, 8″ x 15lb I-Beam frame, 7GA body, floor & sides, 32″ sides with board brackets, 3 stage telescopic cylinder, heavy duty ramps, rear stabilizer drop legs, 3-way gate, 3″ I-beam on 16″ centers, 2 5/16″ 21k Demco EZ-latch coupler, 12k drop-leg jack, hydraulic power up & gravity down, 14′ corded remote, wireless bed control, super heavy duty diamond plate fenders, all led lights, (4) 5/8″ D-Rings, fork holders, 20′ heavy duty black tarp, black wheels, tire size 235/80R16 10ply radial,

Hydraulic cylinders are an essential component in many industries, including most of Australia’s critical sectors. Hydraulic cylinders and rams all provide the power a hydraulic system needs to function, but within the category of ‘hydraulic cylinders’, there are a few key types to understand.

The major way of dividing hydraulic cylinders is between ‘single acting cylinders’ and ‘double acting cylinders’. While fairly similar in function, there are differences between single and double acting hydraulic cylinders, meaning they aren’t interchangeable.

The main difference between single and double acting hydraulic cylinders is that a double acting hydraulic cylinder uses hydraulic pressure to move a piston in two directions, while a single acting hydraulic cylinder relies on a spring or gravity to return to its original position.

To help outline the differences in these fairly similar hydraulic systems, we have produced this handy guide. This article outlines the key differences between single and double acting hydraulic cylinders, and when is the best time to use each one.

Whether you’re choosing the right hydraulics components or need to repair hydraulic cylinders, you’ll need to know what type of cylinder or ram you’re working with. That’s why we’ve also covered how to identify single vs double acting cylinders and whether you can convert them.

A single acting hydraulic cylinder is a hydraulic cylinder in which the fluid acts only on one side of the piston. It relies on the springs, gravity, load, other cylinders, or separate reservoirs to push the piston back into the opposite direction.

The fluid used a type of oil (usually mineral oil), which allows the fluid to push a load without being compressed back down by the weight. This type of hydraulic cylinder is best for straightforward applications, where the goal is to have something move in one direction.

Push Type Hydraulic Cylinder– Fluid enters to push the piston out of the cylinder. This is also referred to as a hydraulic cylinder with a ‘sprung in’ position, where the piston is fully retracted at rest.

Pull Type Hydraulic Cylinder– Fluid enters to pull the piston inside the cylinder. This is also referred to as a hydraulic cylinder with a ‘sprung out’ position, where the piston rod is fully extended at rest.

In a single acting hydraulic cylinder, a plunger extends when the cylinder is pumped full of pressurised fluid. When it is retracted, the plunger can retract using a return spring, by the load or gravity.

Single acting hydraulic cylinders have only one port, where pressurised fluid enters. These are fitted with either a spring, or a load. When the fluid is compressed, it enters through the single port which forces the piston to extend in one direction, consequently compressing the spring. The spring then retracts the piston back into its previous position after releasing the fluid from through the same port it originally flowed from.

The typical applications of single acting hydraulic cylinders are simple lifting jobs, light industrial and commercial applications, and any other application where fast and consistent retraction is not essential.

Position And Line Up Objects – Through this application, a workpiece or product is either pulled or pushed into place, or into a specific machine such as a conveyor belt, before the spring acts and prepares the hydraulic cylinder for the next workpiece.

Punch Or Mark Objects– In this application, thrust from a single acting hydraulic cylinder is used to either punch or mark an object. The spring then retracts the punch, ready for the next object.

Keep in mind that double acting hydraulic cylinders are able to do all of the above, albeit without the cost savings of a single acting hydraulic cylinder. When it comes to hydraulic cylinder parts, single-acting cylinders are simpler and therefore cheaper to purchase.

Lower cost– The initial cost of single acting hydraulic cylinders is much lower than double acting ones. This makes it ideal for situations where a double acting hydraulic cylinder may be too much, and a single acting hydraulic cylinder will work fine. In addition, its single port and small housing leads to reduced valve and hose cost compared to double acting cylinders.

Easier maintenance – Since force is only applied to one direction, there are fewer areas or segments which have to be maintained. Single acting hydraulic cylinders are easier to maintain and repair, especially if you know how to maintain hydraulic cylinders.

Safety benefits– Single-acting hydraulic cylinders have a specific rest state, which can be easily identified in the event of a power outage. Knowing the cylinder’s resting state will prevent surprise and injury once power is restored, if the cylinder is halfway through an operating cycle.

International Standards –Compared to double acting hydraulic cylinders, there aren’t many single acting hydraulic cylinders that are compliant with ISO standards.

A double acting hydraulic cylinder is a hydraulic cylinder in which the fluid alternately acts on both sides of its piston. It has a port on each end, filled with hydraulic fluid for the pistons’ retraction and extension.

This type of hydraulic cylinder is ideal for applications that require fast and predictable retractions, or applications where consistent accuracy is necessary.

In a double acting hydraulic cylinder, the plunger retracts when the hydraulic fluid, which has now been pressurised, is injected into the top port, which forces the plunger back to its original position. It is possible for this process to be done either very quickly, or very gradually with precise control.

Double acting hydraulic cylinders have two ports where pressurised fluid can flow in and out. Fluid flows through one port, which moves the piston forward, which then applies pressurised fluid into the second port which then retracts the piston back into the cylinder.

The standard applications for double acting hydraulic cylinders are those that require repetitive presses and situations that require both pushing and pulling forces. Elevators and forklifts are good examples of double acting cylinder applications.

Double acting hydraulic cylinders can do anything a single acting cylinder can. However, these are especially good for industrial and robotics industries, tasks such as opening and closing doors, and lifting and moving merchandise off conveyor belts. Other uses include medical applications, earthmoving and construction equipment, and even in space programs.

Complexity– Double acting hydraulic cylinders are built slightly different to their single acting counterparts. The parts of a double acting cylinder are more complex. They generally have more pistons, and more seals to accommodate the flow of fluid on both ends for a push and pull control.

Costly– Double acting cylinders are much more expensive than their single acting counterparts. They require larger housing, for example, if it’s used as a feed cylinder and requires coupling with another machine system. Because the system is larger, fluid is often consumed at a faster rate than in single acting hydraulic cylinders.

Single and double acting hydraulic cylinders both serve similar functions, with the double acting hydraulic cylinder being able to do any job a single acting cylinder can, at the cost of being more expensive and requiring more dedicated maintenance.

Single acting hydraulic cylinders are simple, inexpensive, have one job they can do and do it well. These cylinders are exceptionally useful in fabrication, where one repetitive movement is required, such as on a factory line. Manufacturing hydraulics systems strongly rely on low-cost single acting cylinders.

Double acting hydraulic cylinders, in comparison, are far more sophisticated and powerful. Not only can a double acting cylinder perform any job a single acting hydraulic cylinder could, but by having the piston pressured to move in two opposing directions, it’s essential to the way modern pneumatic machinery works today. Things like elevators and forklifts could not exist without double acting hydraulic cylinders.

If an application only needs motion in one direction, a single acting hydraulic cylinder is the safest and most economical choice. However, any situation requiring greater control and power requires a double acting hydraulic cylinder, and the ISO standards compliance associated with them.

The receiver comes in a 3″ urethane-potted enclosure, is totally weatherproof, and has six inches of GXL wires for you to make your external connections as well as the environmentally sealed rugged backup pushbuttons. Each output is solid-state and supplies up to 5A of current. The transmitter runs on a replaceable coin cell battery and gets in the area of 16 hours of use (actively holding a button) on a single battery – enough to last a season or much longer.

When you are in need of 12-volt dc hydraulic pumps, Target Hydraulics is your source for reliable information and an exact match of the supplier. You can depend on us to make sure you have the right 12v hydraulic pump for your application and get it to you quickly.

Target Hydraulics has a known reputation for speedy service and providing quality hydraulic products. We have a complete inventory of hydraulic hoses, fittings, valves, cylinders, motors, and pumps that are always available to serve industrial and hydraulic companies all over the world.

Target Hydraulics can turn your idea for a machine into reality with our design, fabrication, and commissioning services with more than 5000sqm facility and warehouse that always help running your business high efficiency.

All DC12v single-acting hydraulic pump components are designed by 3D software to ensure your project. Your Clients will be satisfied with our customized packing and label for your 12v hydraulic pump Brand.

Target Hydraulics team can provide solutions to handle all your 12v hydraulic pump needs with over 10 years of hydraulic products manufacturing experience, at the same time with 24 hours no-stop CNC machine department that can help your 12 v hydraulic pump and ram samples delivery very quick.

Join our satisfied customers and see why they trust our process with their critical hydraulic repair needs. Every team member of Target Hydraulics is committed to putting your needs first by delivering the highest quality standards, industrial hydraulic repairs, at the lowest possible cost and in the shortest possible time.

A 12 volt electric hydraulic pump is a mechanical system that transforms hydraulic energy power into mechanical power. To overcome pressure caused by the load from the hydraulic system, it generates hydraulic oil flow with adequate strength.

It serves two functions while a dc hydraulic pump runs. First, the hydraulic gear pump produces a vacuum at the suction inlet of the pump that allows the air pressure to push the hydraulic oil liquid through the inlet suction filter of the pump from the hydraulic tank reservoir. Second, this liquid is transmitted to the pump outlet by its mechanical action which drives it into your hydraulic systems such as hydraulic dump trailer cylinders.

A mechanical power source that converts hydraulic energy power into mechanical power is a 12-volt DC hydraulic pump (hydrostatic energy i.e. flow, pressure). It creates flow with sufficient strength in order to overcome pressure induced by the load at the pump outlet. As a 12-volt DC motor runs, it creates a vacuum at the pump inlet that moves hydraulic oil liquid from the hydraulic oil tank along the inlet line to the pump and sends this hydraulic oil liquid by mechanical action to the pump outlet and drives it into the hydraulic systems.

In order to transfer energy from one electrical power to another motion, a 12-volt hydraulic system uses sealed fluid and then produces other different motions, such as linear motion, rotary motion, or force. The hydraulic power unit (12-volt hydraulic pump) provides the hydraulic power that is required for this fluid transfer.

DC motor powered by battery, the gear pump suction hydraulic oil from hydraulic tank reservoir, powered hydraulic oil fluid goes into hydraulic central manifold bock, pressure over check valve cracking pressure and then move the hydraulic cylinder. System pressure higher than check valve cracking pressure. It will open the relief valve setting pressure when the cylinder is fully open. The electrical power was changed to linear motion.

There would be various design features distinct from a traditional pumping system for a massive, robust hydraulic power unit. But the 12 volt hydraulic pump is a very simple hydraulic system. The main items are:Hydraulic central manifold:These are containers to which hydraulic actuators may be connected. They also gather DC motors, gear pumps, and hydraulic oil tanks. most of the hydraulic valves also mounting in this hydraulic component.

12v hydraulic pump motor: A 12v hydraulic power unit will be fitted with a DC12v hydraulic pump motor with a start relay. Normally this kind of DC motor is S3 work duty, can not work for a long time. only mins.

Tanks:A hydraulic power pack tank is a holding unit built to have ample capacity to pump the fluid in the pipes into it. Similarly, actuator fluid can need to flow into the tank often. And it can make oil heat exchange and release air from hydraulic oil.

Filters:Usually, a filter is mounted on top of the tank if it is a big hydraulic power unit, but 12-volt electric hydraulic pump is a small hydraulic power unit, so, the filter is just in the gear pump suction pipe. It will help your hydraulic system clean, to make sure all your hydraulic components can work stable.

Coolers and Heaters:An air cooler should be mounted in a hydraulic power unit to keep temperatures from rising above operating parameters. Similarly, as the DC 12v hydraulic pump motor is an S3 work duty compact hydraulic power unit, it does not design with coolers or heaters, its’ tank will make oil cool.

Remote control switch: The operation of the 12v hydraulic pump are some wire remote control switch.12v hydraulic pump single-acting complete with 3 wire dump trailer remote control switch and 12 volt double-acting hydraulic pump comes with  4 wire dump trailer remote control switch.

Hydraulic pumps are widely used in practically any single hydraulic power transfer scheme. The device which converts mechanical energy into hydraulic power energy, which is a combination of hydraulic pressure and flow, is a hydraulic pump. Any system you can input force to which in turn produces flow can be a hydraulic pump.

Hydraulic pumps are used more prolifically for mobile applications than by industrial equipment since electric actuators are usually not used by mobile machinery.

If temperatures are more to the top, such as below -20 ° C and over 60 ° C, with pressures above 250 bar, it would be necessary to stop your 12v hydraulic pump stop.

In a tiny box, DC electric hydraulic power units pack can supply a lot of power. On dump trucks, stackers, snowplows, forklifts, and hundreds of other applications that include a self-contained, mobile hydraulic power pack, these 12-volt electric hydraulic pumps are widely used. These small electric hydraulic pumps & power units have been engineered for years to weather harsh conditions and provide consistent efficiency.

12v hydraulic pump single acting and 12v hydraulic pump double acting are the most common DC 12v hydraulic power units. Some others are also available such as dual double acting hydraulic pump,4xdouble acting hydraulic pump,etc

You must determine whether the viscosity( (VG)) can be correctly used to fulfill the specifications of your hydraulic system pump in order to choose some hydraulic fluid. The various oil viscosity amounts will be suggested by the oil manufacturers. This would be important to various kinds of pump forms.

DC12v hydraulic pump hydraulic system normally works with a gear pump,so, it is easy to get correct hydraulic oil. normally summer is 46#, winter is 32#.

You must ensure that the hydraulic oil is properly cooled in order for your hydraulic power pack to work more effectively and last for a longer time. Sometimes you should mount a hydraulic oil cooler with your hydraulic pump systems if your hydraulic system is a longtime running system.