prince hydraulic pump parts free sample

Flow Control/Divider Valve Parts Manual - Covers model numbers starting with RD-100, RD-1900, RDRS-100, RDRS-1900, RD-200, RD-300, RD-400, RD-500, RD-900, RD-1000, RD-1400, RD-1600 and RD-1800.

The Prince Manufacturing Catalog of Hydraulic Cylinders, Valves, and Pumps is available in PDF file format. To reduce download times, the catalog has been broken into 3 sections. If you do not have Adobe Acrobat Reader, you can download it here for FREE.

This page provides answers to frequently asked questions regarding; troubleshooting basic hydraulic systems, basic installation/plumbing diagrams, basics on functionality of our control valves (manual and solenoid operated) and directions for identifying our products. Troubleshooting Basics

Due to the nature of used parts, this part may not be in stock at all times. We will notify you within one business day if we are unable to ship the part for any reason.

The 1000 and 2000 Series PTO"s have been engineered to work with the most common transmissions in today"s market. Offered in a wide range of input gear, ratio, output, and shifter options, these cast iron PTO"s include large 12mm flange bolts, which make for a very sturdy and durable pump mount, supporting some of the larger pumps in the market. Both of these models are also available in a deep mount 1010 and i2010 series. All Bezares PTO"s are built with the highest quality bearings and sealing components available.

The Prince RD-1800 Valve is a direct acting ball/spring type pressure relief. The valve is compact and simple in design. This type relief is fast opening and is well suited for pressure spike protection. The performance curves below indicate the low cracking pressure typical to ball/spring reliefs. The valve has a standard steel seat, externally adjustable.

The SP20B pump now utilizes self-lubricating thrust blocks that eliminate the need for seperate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

Patented Non-Symmetrical Gears - The adoption of non-symmetrical gears insures greater power per unit volume compared with pumps of conventional design. The compact gear has enabled high-pressure operation. The increased number of gear teeth has reduced the flow pulsation and minimized the noise.

The Versa-pak Flow Control/Unloader unit is ideal for most residential and commercial refuse hydraulic systems. Applications include residential and commercial front loaders, rear loaders, automated side loaders, compactors, roll-offs, recycle and all PTO driven pump applications.

The 1000 and 2000 Series PTO"s have been engineered to work with the most common transmissions in today"s market. Offered in a wide range of input gear, ratio, output and shifter options, these all cast iron PTO"s include large 12mm flange bolts, which make for a very study and durable pump mount, supporting some of the larger pumps in the market. Both of these models are also available in a deep mount 1010 and i2010 series. All Bezares PTO"s are built with the highest quality bearings and sealing component available.

The Prince valve model RV is a differential poppet type inlet relief. The valve is made up of a relief cartridge and a cast iron valve body. The differential poppet type relief provides smooth quiet performance with a minimum variation between cracking and full flow pressures. This type relief is also less sensitive to system contamination. The model RV is well suited as a system relief up to 30 GPM and 3000 PSI. It is available in two pressure ranges and both an externally adjustable and shim adjustable version.

The SP25A pump now utilizes self-lubricating thrust blocks that eliminate the need for seperate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluropolymer PTFE wear surface that yields unsurpassed load carrying capabilites and cavitations resistance even at low speeds and moderate levels of contamination. Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

Patented Non-Symmetrical Gears - the adoption of non-symmetrical gears insures greater power per unit volume compared with pumps of conventional design. The compact gear compartment has enabled high-pressure operation. The increased number of gear teeth has reduced the flow pulsation and minimized the noise.

We carry the following Permco Series Numbers for Sleeve Bushing Pumps: P124, P197, P257, and P360. Click on the "details" button to see a list of specifications for each series.

The 3000 Series PTO is designed for the Allison AT/MT/HT model transmissions. This PTO has a low profile housing for easier mounting and is available with various outputs, ratios as well as either electric over hydraulic or air shift options.

Full service Hydraulic cylinder repair, machine shop, hydraulic pump and motor repair, hydrostatic, transmission repair and testing. Full line of hydraulic hose, fittings and adapters.