racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Check out our Hydraulic Oil Recommendations page to assist with oil selections and assistance in preventing future hydraulic failures.Hydraulic Cores and Surplus

Whether you have a single pump or crates of used hydraulic equipment, ProActive Fluid Power can provide an immediate appraisal, assist with freight, and provide a hassle-free selling experience.

Searching for a hydraulic supplier who can assist with factory new, reconditioned, obsolete and hard to find items? Do you have cores for sale? Do you have questions regarding shipping?

During this time, we have become the go-to source for end users, hydraulic repair shops as well as original equipment manufacturers that demand quality products delivered within a reasonable period of time.

Do you have a customer who is threatening to buy from your competitor because he needs an answer now? Are you losing thousands of dollars every hour because your machine is down? Do you have a stranded street sweeper or a tractor with hydraulics that failed out in the field?

Over 90% of orders taken are shipped the same day. Most repairs are returned the following day and quote requests are returned within hours or minutes.

Are you an OEM distributor or hydraulic equipment reseller who would like to have a product shipped directly to your customer without them knowing where it was purchased from?

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Tri-State Hydraulics has over 45 years of experience with Racine pumps and can offer expertise in repair or replacement. Racine pumps and parts are getting harder to come by since being obsoleted. Before spending the money on a brand new replacement unit or making expensive and time consuming changes to your equipment, consider a less-costly alternative: one of our re-manufactured units. That way, you’ll save money and be up and running immediately. In 1997, after years of success, Racine and Bosch Rexroth joined forces.

Tri-State Hydraulics carries an extensive inventory of Racine pumps and parts. Tri-State exhaustively tests and sets each product to OEM specifications using our proven check system before shipping. We also offer a wide range of services including comprehensive reconditioning, a full part replacement, expert support and a test facility. Contact us today at (847.439.8987) to quickly repair or replace your Racine pumps.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

We will contact you to inform you of what we found, give you a quote for repair and a timeframe for completion, or let you know if we cannot repair it.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Racine hydraulics was acquired by the Bosch Rexroth Group in 1997. Many Racine hydraulic pumps, hydraulic motors, valves and accumulators are today considered to be obsolete.

But here at Hydraulics Online we are still able to provide a wide variety of legacy equipment across the marketplace, and that includes Bosch Racine pumps and equipment.

Please contact us if you cannot see the Bosch Racine hydraulic equipment that you need – we’ll still be able to help across the range, whether with replacements units, spares or repairs.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Hydraulic Specialties Inc. is a global repair center specializing   in the distribution, service and repair of obsolete and hard to find components from Bosch, Racine, Oilgear and more. We distribute new and rebuilt components; in addition we will also purchase your excess hydraulic inventory.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Repairing and supplying re-manufactured and new Racine hydraulics – Racine hydraulics pumps, Racine hydraulics valves, and Racine hydraulics motors. Search our online catalog or contact us and let us know how we can help you.

We can supply what you need or repair what you have. Before purchasing, there may be a good chance that your current hydraulic pump, motor, valve, or cylinder can be repaired. Contact us to see if we can repair your Racine hydraulic pump or send in your Racine pump for inspection and evaluation. Racine hydraulics pump repairs, including motors, valves & cylinders comes with our two year warranty.

When purchasing, consider Racine hydraulics re-manufactured or after market hydraulic units. Best of all they can get you back up and running for less than the cost of a new hydraulic unit. We will give you a free quote so you can compare costs for a new, repaired or re-man Racine unit.

Located in Detroit, Racine Hydraulics was founded in 1958. In 1997 the Racine was merged with Bosch Rexroth. Rexrothcontinues to support the PSV series vane pumps for new and replacement applications. As a carryover from the Racine Fluid Power legacy program, Rexrothcontinues to support the Racine PSV series vane pumps for both new and replacement applications. The PSV series, otherwise known as the SV or Silent Vane product line, has a very large installed base around the world. These variable displacement vane pumps have proven themselves in the most demanding applications and they have built an excellent reputation with the OEM and user markets.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Are you looking for a replacement or rebuild of your Bosch Rexroth hydraulic pump? Get in touch with us today. We are an independent Bosch Rexroth repair center and we specialize in Bosch Rexroth pump repair and rebuilds.

We provide fast, reliable hydraulic pump repair service on all Bosch Rexroth models. We only use genuine OEM parts for our repair work, so you know that you won’t get gray-market or counterfeit parts.

Our team of skilled technicians will give your pump the attention it needs, and put it through our detailed inspection and repair process. Once the pump has been reassembled, we’ll test it thoroughly with our state-of-the-art test equipment. When you get it back, it will meet or exceed factory specs.

When you work with us, we think that you will keep coming back to us for all of your Bosch Rexroth hydraulic repair needs, including Bosch Rexroth hydraulic motors and genuine replacement parts for Caterpillar, John Deere, Case New Holland, and Volvo.

The list below includes numbers that we have worked on in the past. If you don’t see your model number listed, just let us know. We service every hydraulic pump available from Bosch Rexroth.

We can send our field technicians to your location for on-site Bosch Rexroth hydraulic pump repair. We can help get your pump back up and running as soon as possible. Our reliable, experienced team can perform diagnostic services and minor repairs for equipment and machinery used in many industries. Our team can travel throughout the United States and many international locations, including North America and South America.

If repairs cannot be made on-site, then ship it to our facility. If you’re close enough, you can drop it off. If you get it to us by 10:00 AM, and we have the same model in stock, we’ll repair it and have it ready to ship by 5:00 PM the same day.

The commitment to the quality of products and services has a long tradition within Bosch, and the company has implemented a process-oriented quality management system that helps the entire organization to continuously improve. Bosch Rexroth makes hydraulic pumps for a wide variety of mechanical industries. Bosch Rexroth makes pumps for everything from automotive applications to power generation and more. Their pumps produce force with uniformity at a low cost. The concept of “Quality first – first in mind, first in action” drives Rexroth to keep itself at the head of the competition. This strengthens Rexroth in the growing machine and plant construction environment.

Don’t see your Bosch Rexroth hydraulic pump model number? Not a problem. Call 800-800-6971 or send us an email. Chances are we’ve worked on it before and have parts for it, even if it’s not listed on our website.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Our engineers can rebuild/remanufacture your hydraulic pump to bring its operation back to OEM specifications. Our technicians have been factory trained by multiple OEM’s in the rebuild process of hydraulic pumps. After the remanufacturing process is complete, each pump is fully tested to max PSI to ensure proper operation under load.

It’s always exciting to see new equipment run for the first time. It’s also a bit saddening to realize that it may never run that well again. Naturally, with continued use, equipment becomes a little less efficient and productive. That is where K+S Services comes in. Our hydraulic pump repair services restore hydraulic pumps to peak efficiency. We also do expert hydraulic cylinder repair and standard hydraulic repairs.

Hydraulic pump repair companies and manufacturers machine the internal parts to tight tolerances. Lubrication by hydraulic fluid keeps the parts moving and cuts down on wear. Seals keep contaminants out as best they can to keep those lubrications operating as they should. Still, there is no type or amount of lubrication that will keep pumps running forever and contaminants will always work their way in. Eventually, pumps become less efficient, start leaking fluid leaks or seize completely.

Hydraulic pumps and accessories have long service lives. They may have been standard catalog items in the beginning but, today, they are obsolete. Retrofitting your system with different units would be costly and time-consuming. The best option is to breathe new life into your existing equipment. That means having a hydraulic pump repair service rebuilding or remanufacturing it to the original equipment manufacturer (OEM) specifications.

Final hydraulic pump testing at K+S Services occurs in a simulated real-world application. At the end of the extended test, a supervisor reviews the unit. If it is operating properly and conforms to OEM specifications, the repair is complete.

You knew that your hydraulic pump wasn’t going to last forever. Maybe it let you know the end is near. Perhaps it just stopped working altogether and a hydraulic pump repair is necessary. Do you have a spare? If not, one may be available.

Where do these parts come from? They come from customers like you. Replacing and repairing obsolete and discontinued equipment is always a challenge. Having a huge volume of reconditioned spare parts and equipment is good for everyone. Contact us to discuss how we can help you recycle your surplus or unneeded equipment.

Are you in the middle of a hydraulic equipment crisis? Do you have hydraulics that are ready to fail? Is there a spare hydraulic vacuum pump or blower that you are ready to recycle? Contact one of our hydraulic pump repair representatives at K+S Services and let us help you address your hydraulic pump needs.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Racine is now owned by Bosch in the USA. We can repair Racine units and supply Racine units on good delivery times due to our strong links with suppliers in the USA.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

CJ Plant are one of the UK’s leading hydraulic repair specialists who specialise in the repair of all major brands of machinery/ OEMs. We are a well-established company with years of experience in all aspects of hydraulic repairs to hydraulic pumps, motors, final drives, swing reduction units, control valve blocks etc. We believe we offer one of the most complete and cost-effective services in the country to deal with all your maintenance and repair needs in one place and place us far ahead of our competitors. Savings of up to 50% compared to main dealer prices are not uncommon for our customers. We deal daily with customers not only from the UK but from all over the world and offer a quick and professional solution which can be broken down into nine key points:

Following our inspection and evaluation we provide the customer with a report of our findings and a competitive quote for repairs with no obligation to accept.

Once our quote is accepted by the customer, all parts are meticulously cleaned first with a machine hot wash then by hand to ensure total cleanliness. This also allows a second inspection by experienced repair staff to ensure no damage has missed.

To ensure our customers receive the optimum performance from their equipment on its return we have invested in custom built hydraulic testing equipment unique to our facility to be certain we deliver the best results. This means our hydraulic testing can be performed at various speeds and pressures to simulate the actual working conditions the part will be subjected to when working in line with OEM standards. All fluids used are filtered to ensure purity and prevent any contamination at the last stage.

Our large network of parts suppliers means that not only can we provide repairs in the shortest time possible but the range of spares we carry means we can also supply these when needed for jobs the customer can complete on their own. When repair is not possible, we can also supply a range of reconditioned and new unit. We can also offer a service exchange programme when necessary and all the products we supply are fully OEM tested.

At CJ Plant we pride ourselves not just on the speed and quality of our work but on the standard of service we provide to all customers, regardless of location, size of order or complexity of their request. Our friendly, professional staff make it their business to help satisfy all our customers’ needs and requirements and would be happy to answer any enquiries. Please call and speak to one of our Hydraulic Repair Services today.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

At Century Hydraulics & Mfg, our expertise goes far beyond standard hydraulic sales. The true depth of our knowledge lies within diagnosis and repair of hydraulic products. Whether we have your unit in stock or not, repair is always an option. In fact, it may be your best option for obsolete and hard to find hydraulic pumps, motors, valves, and servos.

We provide expert hydraulic pump & motor repairs on Sauer Sundstrand, Vickers, Bosch/Rexroth, Racine, Denison, Staffa, Parker, Oilgear, Continental, & many more.

We stock an inventory of new & re-manufactured hydraulic pumps and motors. Many units are in stock and available for immediate delivery. We fully test all units and set to OEM specifications before leaving any of our facilities and we back units with an industry leading warranty.

Whether we have your unit in stock or not, repair is always an option. In fact, it may be your BEST option for obsolete and hard to find hydraulic pumps and motors. Letting us repair your unit. Repairs can be drastically cheaper than replacing parts, especially if parts are hard to come by.

Whether we have your unit in stock or not, repair is always an option. In fact, it may be your BEST option for obsolete and hard to find hydraulic pumps and motors. Letting us repair your unit. Repairs can be drastically cheaper than replacing parts, especially if parts are hard to come by.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Designed to feature few movable parts, gear pumps are smooth operators at high pressures of up to 210 bar.  These pumps have high speeds of up to 3000 to 6000 rpm. Gear ring, external gear, screw spindle and internal gear are typical examples of gear pumps.

Piston pumps are designed to support large fluid flows at high pressures within hydraulic systems. These pumps find use in the marine, industrial, offshore, and mobile and construction equipment. Radial fixed, radial variable, axial fixed and axial variable displacement pumps are examples of piston pumps.

Vane pumps are designed for lower fluid flow pulsations (consistent flows). This means vane pumps operate at high speeds yet produce low noise levels. Denison single, Denison double, variable displacement, fixed displacement and Denison triple are examples of vane pumps.

Screw pumps are designed to support high fluid flow in low pressure environments. They include double end, single end, multi-rotor timed, single rotor and multi-rotor untimed.

The essence of hydraulic pumps in hydraulic systems is clear at this point. This means if they fail, your hydraulic system’s proper functioning is impaired. As a result, your system can realize reduced performance and thus production. Your company can also suffer serious losses in terms of customers and finances.

Don’t worry because this is where IMS comes in to offer you hydraulic repair services. We offer hydraulic pump repair services to ensure your systems are back up and running, working as expected. As a result, the performance of your mobile or industrial machinery improves, leading to increased productivity and ROI. What’s more, we stock various hydraulic pumps to ensure that in case there’s need for replacement, we get the job done very fast.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

ISO 9001:2015 registered repair, rebuild and recondition service for hydraulic products and components, including hydraulic pumps. Hydraulic pumps repaired include piston motors, vane motors and gear motors. Hydraulic components repaired also include motors, valves, flow controls, pressure controls, directional controls, feed panels, servo valves, actuators, rotary actuators, linear actuators, drives, cylinders and power units. Services include assembly and disassembly, cleaning, tolerance checking, replacement of parts, seals and bearings, reassembly and testing.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

The Highest Quality Hydraulic Repairs At The Lowest Possible Cost In The Shortest Possible Time Many of our customers save 70% over the cost of new OEM equipment, and get faster results with our rapid response 24-hour emergency repair service.

Atos · Fife · Poclain · Barnes · Flo-Tork · Racine/Bosch · Beach Russ · Gresen · Riva Calzoni · Bignozzi · Gusher · RVA · Bosch Rexroth · Hagglunds · Sauer/Sundstrand · Brueninghaus · HPM · Schrader Bellows · Bucher · Hydro-Line · Sheffer · Calzoni · Hydromatik · Staffa · Cessna · Hydrostar/KYB · Tokimec · Char Lynn · Hydra-Oilgear · Towler · Cincinnati · IMO · Trunninger · Continental · Kawasaki · Vickers · Daikin · Kline · Viking · Drake · KYB · Voith · Delaval IMO · Linde · Volvo · Denison · Miller · Wagner · Donzelli · Moog · Waterman · Double A · MTS · West · Dynapower · Nachi · Yuken · Dynex-Rivett · Oilgear · Eaton · Ortman · Ellwood · Parker · Excello-Rotac · Pleiger

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

At Global Electronic Services, we’re often called upon to service hydraulic pumps. Hydraulic pumps are an important part of a wide variety of manufacturing processes. If you use them in your industry, you need to have them up and running at maximum efficiency as often as possible.

We have seen and repaired all types of hydraulic pumps and can get yours back to you fast if you should have a problem. Here is a little more information about the types of hydraulic pumps we service and how we service them.

Piston Pumps: Piston pumps are the most common and also the most capable of complex jobs. These are the hydraulic pumps you are most likely to find in manufacturing situations. They are the pumps you will use in high-pressure applications. A piston pump is a positive displacement pump that uses a high-pressure seal working reciprocally with a piston to move water. This configuration allows them to operate under high pressure without noticeably affecting flow rate.

Vane Pumps: These are less common and simpler pumps that you can use for lower-pressure applications with high flow rates. Vane pumps are positive displacement pumps that can work with a number of different vanes, including flexible vanes, swinging vanes, rolling vanes, external vanes and sliding vanes. As the rotor of the motor rotates, the vanes sweep liquid to the opposite side of the cavity inside the motor and squeeze it through discharge holes in the cam.

Gear Pumps: This is the most basic hydraulic pump you can use. You will typically use this pump for single, basic applications. Gear pumps work by using two gears which mesh to displace water. The gears rotate together, creating suction as they separate, which draws water into the pump — water it then displaces when the gears mesh together.

The most common problem you will encounter with any hydraulic pump is wear. Like all mechanical parts, hydraulic pumps wear out eventually with use. Contamination and heat issues are the most typical cause of premature wearing-out when it comes to hydraulic pumps.

Although familiarity with all of the different types of pumps is a requirement for all of our trained technicians and definitely facilitates the repair process, the problems that hydraulic pump issues face and the way we resolve them is fairly similar for all types of hydraulic pumps.

We start by fully disassembling the hydraulic pump so we can see each part to try to visually identify what is causing the problem. Once we find what is creating the issue, we will repair it if possible. If not, we’ll replace it with a new OEM part. We will then reassemble the pump and test it to make sure it is operating according to original specifications.

We will replace any worn-out parts with new ones so that when you get your hydraulic pump back, it will be like-new. To ensure your confidence in our repair, we offer our 18-month in-service warranty.

In addition to our promise that you will get back a fully functioning hydraulic pump — usually in five days or less from the time we receive it — you will also appreciate that we have the lowest price anywhere when it comes to hydraulic pump repair. If you can bring us a verified competitor’s price for hydraulic pump repair that is lower than ours, we will beat it by 10 percent.

If you’re having a problem with your hydraulic pumps, you don’t want to waste a minute. Your hydraulic pumps are a critical part of your operation and every hour you spend without a necessary pump could cost you valuable productivity and hurting your bottom line. At Global Electronic Services, our goal is to minimize that downtime by turning around your hydraulic pumps and other mechanical parts in need of repair as fast as possible.

Contact us now to request a free, fair and accurate quote on hydraulic pump repair and have your pumps back and in top working order in the shortest possible time at the lowest possible price. Get in touch with Global Electronic Services today!

Be sure to visit us online at gesrepair.com or call us at 1-877-249-1701 to learn more about our services. We’re proud to offer Surplus, Complete Repair and Maintenance on all types of Industrial Electronics, Servo Motors, AC and DC Motors, Hydraulics and Pneumatics. Please subscribe to our YouTube page and Like Us on Facebook! Thank you!

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Industrial Servo repairs a wide variety of motors manufactured by all of the major manufacturers and we can repair obsolete motors the manufacturers will not repair anymore.

Every hydraulic motor is tested at the rated pressure and flow specification. The rpm’s will be checked with its rated pressure and flow and will not leave our facility until it meets all of the manufacturer’s specifications.

A history of all repairs are kept on file with the flow / pressure / and internal leakage and a copy of this performance report is sent to the customer for their files.

racine <a href='https://www.ruidapetroleum.com/product/47'>hydraulic</a> <a href='https://www.ruidapetroleum.com/product/49'>pump</a> repair factory

Often, special machining parts are needed to restore older equipment. If you contact Hydraulic Solutions to attend to your problem, our hydraulic repair experts will provide the exact solution you need. As the best solution for your hydraulic problems, we assure customers their work will be done right and as soon as possible.

A full range of hydraulic repairs are offered by our hydraulics experts, including hydraulic cylinder repairs, hydraulic power units, hydraulic hoses, hydraulic pumps & motors. Our hydraulic engineers provide the specific design and installation to deliver maximum productivity and cost effectiveness. Hydraulic Solutions has earned an outstanding reputation for top-quality work, practical solutions and expert craftsmanship. Your complete satisfaction is guaranteed.