rexroth hydraulic pump spare parts free sample

ETS is committed to providing our customers with the most reliable and genuine Bosch Rexroth, Parker, Calzoni, Vickers (Eaton), Atos & Hydac pump and motor units, valves and parts possible.

Around 98 percent of the spare parts kits consist of seal kits. The seals used at Rexroth are subject to strict criteria in terms of material, manufacturer and quality, as these are decisive in hydraulics for the tightness, performance and service life of the systems. This begins with the correct dimensions of a seal for a given installation space. Without appropriate design tools, it becomes very difficult for the user to find a working solution. Rexroth-specific R-ring seals in particular - in comparison to the somewhat simpler O-rings - cannot be designed with externally available online tools.

Errors can also easily occur in the material. For example, the common designation NBR says little about the exact composition and thus about the mechanical, thermal and chemical resistance. Of the numerous seal manufacturers on the market, hundreds of so-called compounds are available, the differences between which can only be determined by extensive testing and whose service life in the hydraulic system varies enormously.

The seal kits therefore contain the original seals of Rexroth hydraulic components, i.e. also the correct materials in original equipment quality, optimally matched to the installation situation.

The complete seal kits from Bosch Rexroth always contain all necessary sealing rings for maintenance. A uniform packaging system with standardized cartons protects the spare parts from negative environmental influences and simplifies storage by the user. The seals are individually welded onto seal kit supports and protected against oxygen, light and UV radiation. This prevents deformation, hardening, ageing, corrosion and weathering, especially in the case of sensitive high-performance seals, even during long periods of storage. This allows the user to exploit the full service life of the seals in the system.

Our specialist for spare parts and our online shop helps to identify fast and reliable the right spare part. We deliver them all over the world. That makes maintenance and repairs fast and easy to plan. Rexroth original parts are always made to the latest design version in hard and software to let you get the most recent technology.

We regularly stock (and can source) parts like: Ball Guides, Bearings, Block Springs & Disc Springs, Cylinder Blocks & Valve Plates, Housings & Casings, Pilot Pumps, Piston Sets, Seal Kits, Set Plates, Shoe Plates, Shafts, Swash Plate Assemblies, Bolts & Screws and much, much more.

We carry a large selection of Bosch Rexroth hydraulics pumps, motors & more. If you can’t find the Rexroth Pump you’re looking for or you need a Bosch Rexroth hydraulics pump repair, contact us today!

We can supply what you need or repair what you have. Before purchasing, there may be a good chance that your current Bosch Rexroth hydraulic pump or motor can be repaired. Bosch Rexroth hydraulics repairs and motor repairs come with our two year warranty.

When purchasing, consider remanufactured Bosch Rexroth hydraulics or after-market hydraulic units. They can get you back up and running for less than the cost of a new Bosch Rexroth hydraulic unit. We will give you a free quote so you can compare costs for a new, repaired or re-manufactured Bosch Rexroth unit, saving you money without compromising the results of your Bosch Rexroth hydraulic unit.

In 1795, the Rexroth family established an iron forge in Spessart, Germany. However, it wasn’t until 1952 that they began producing standardized hydraulic components and hydraulics. In 1953 they invented the first industrialized gear pump for mobile machines. Later, in 1972, Rexroth launched the first hydraulic servo valve onto the market and became a wholly-owned subsidiary of Mannesmann AG in 1975. They developed the world’s first maintenance-free AC servomotor in 1979, revolutionizing the mechanical engineering industry. Throughout the 90s Rexroth continued to grow and revolutionize the industry, launching inventions used in a variety of industries. Mannesmann Rexroth AG and Bosch Automation Technology merged to form Bosch Rexroth in 2001 and today, Bosch Rexroth is one of the leading specialists in drive and control technologies.

Axial piston pumps: intended for the medium and high-pressure range and come in a variety of designs, performance ranges, and adjustment options for mobile, stationary and industrial applications.

Bosch Rexroth units we commonly stock in new, remanufactured or aftermarket are: A10V, V3, V4, V5, V6, V7, RPV, PVQ, VPV, PSV, PVF, PVK, PVQ, PVS, PVT, 20L, 20H, E055, 80L, 80M, 80H.

Bosch Rexroth hydraulic motors are known for their reliability, long life cycles, low noise emissions, as well as high efficiency, and cost-effectiveness. The range is available in swashplate or bent axis designs which are used in medium and high-pressure applications. They have several models including:

Bosch Rexroth hydraulics offers a range of hydraulic “on/off” valves including isolator valves, directional valves, pressure valves, flow control, and throttle valves, and directional cartridge valves.

Directional valves:control the flow and direction of movement or rotation of hydraulic actuators which include directional seat or spool valves, direct operated or pilot operated valves.

So the axial longitudinal gaps between the rotating and the fixed parts are extraordinarily small and ensure perfect axial sealing of the pressure chamber.

PGH-type hydraulic pumps are gap-compensated internal gear pumps with fixed displacement. The hydrodynamically mounted pinion shaft drives the internal gear. The pinion shaft and internal gear tooth clearances opening in the suction range suck in the hydraulic fluid and transport it to the pressure range. The suction and pressure range are separated by the radial compensation elements and the tooth engagement between the internal gear and pinion shaft.