rotary lift hydraulic pump free sample

You need the best in facility design, we can help you get there… fast! Whether your facility has 5 lifts or 500, an accurate layout is an important step to maximizing your space, efficiency, and profitability. Each year we assist over 350 customers like you with facility planning for service centers and vehicle storage projects. You can’t afford costly mistakes that may prevent your facility project from being completed on time.

With Rotary assistPRO, you get: Custom layouts of your facility with vehicle turning radii and traffic flow analysis based on the vehicles it will service

When your equipment needs parts, you need genuine parts from Rotary—and no one else. Our parts protect the value of your lift or wheel service equipment. Other parts may be less expensive, but they can come at a much greater cost.

Less expensive parts can cost a lot more than genuine OEM parts. Because they’re often not made of the same material, their performance life isn’t as long—and that can lead to more downtime. It can also mean that the manufacturing tolerances aren’t the same, which can lead to equipment damage. Of course, that leads to more downtime, too. And we all know what more downtime means: less revenue. Stick to genuine Rotary parts. They’re good for your equipment and good for your business.

We build and design parts specifically for your equipment. All of the precision, detail and uncompromising standards that went into your equipment also go into our genuine Rotary parts. When you purchase genuine Rotary parts, you can rest assured that you’re getting superior quality, the latest design advancements, competitive pricing, fulfillment within 24 hours and the best service available in the industry. And if you’re looking for a custom part, look no further. Custom parts are available for most of our lifts and wheel equipment.

Out of my 2 shops I have only 5 Rotary 3 – SPOA9 & 2 – SPOA10. I wish I had started buying Rotarys’ first. I’ve got Challenge, Benpak and Hunter. I’d have bought all Rotarys. While the Hunter’s have stood up well I’ve had to repair almost all the rest at some time. The 3 are 25 years old and I’ve had 1 pump fail after 7 years. The 2 are new bought in 2012. I personally like the SPOA10’s myself. The front arm’s are tirples, much smoother and easier to pull out. I bought the round extensions with the flats that screw up by hand. With it and the extensions I can adjust to any height within a 1/4 of an inch. I’d give it 5 starts but the newest one had an upper hose seeping from the start, nothing a rag a week didn’t take care of until they sent me a new one.

This lift can be configured in many ways. If you’re referring to adapters that accept extensions, then normally it’ll come with 4 short and 4 long adapter extensions. It could also come with flip-up adapters that have extensions that fit over top the actual adapter. Please note we’re referring to adapters as the part of the lift that engages or contacts the vehicle. Some refer to these areas as “feet” or “pads”.

One of our distributors can help you with anchoring the lifts. If you’re talking about a baseplate template they can help you with that as well. Use our service installer locator to find the nearest in your area.

Please use this link to talk with a distributor and include our conversation here in your messages to them. https://rotarylift.com/contact-distributor/

You have enough room for the standard 220v version of the lift yes. The required ceiling height is 12′. If you’d like battery-powered “Shockwave®” capable lift you’ll need an additional 6″ of ceiling height for the hydraulic cylinders at the top of the columns.

We do not recommend attempting to alter the configuration of the lift as it was intended to be installed. If you need additional help selecting an asymmetrical lift we can help.

We have your email and will be happy to help work trough any confusion or misunderstanding that might be apparent. We have a video on how to use a two post lift here: https://rotarylift.com/videos/how-to-use-a-2-post-lift/

This can be accomplished as we’ve had customers install lifts between roof trusses or into tray ceiling areas of their shops. It would be best to consult with one of our installers for specifics in your situation as there are many factors that contribute to where the lift will be placed. Our reps can help with ideas you may not have thought about such as running electric, concrete specs, distances in front of the lift.

© 1999 - 2023. Rotary Lift | Powered by Vehicle Service Group℠ | All Rights Reserved. Unless otherwise indicated, Vehicle Service Group and all other trademarks are property of Dover Corporation and its affiliates.

A hydraulic lift is a device for moving objects using force created by pressure on a liquid inside a cylinder that moves a piston upward. Incompressible oil is pumped into the cylinder, which forces the piston upward. When a valve opens to release the oil, the piston lowers by gravitational force.

The principle for hydraulic lifts is based on Pascal‘s law for generating force or motion, which states that pressure change on an incompressible liquid in a confined space is passed equally throughout the liquid in all directions.

The concept of Pascal‘s law and its application to hydraulics can be seen in the example below, where a small amount of force is applied to an incompressible liquid on the left to create a large amount of force on the right.

A hydraulic system works by applying force at one point to an incompressible liquid, which sends force to a second point. The process involves two pistons that are connected by an oil filled pipe.

The diagram below represents a simple version of the working mechanism of a hydraulic device. The handle on the right moves the incompressible oil, under pressure, from the reservoir to the high pressure chamber in the middle of the diagram. The ram moves up as the oil is pumped in.

The force generated in a hydraulic system depends on the size of the pistons. If the smaller of the two pistons is two inches and the larger piston is six inches, or three times as large, the amount of force created will be nine times greater than the amount of force from the smaller piston. One hundred pounds of force by a small piston will be able to lift 900 pounds.

The purposes of hydraulic systems widely vary, but the principles of how hydraulic systems work and their components remain the same for all applications. The most significant part of a hydraulic system is the fluid or liquid. The laws of physics dictate that the pressure on the fluid will remain unchanged as it is transmitted across a hydraulic system. Below is an explanation of each part of a hydraulic system.

Hydraulic Circuits control the flow and pressure of the liquid in the system. The image below shows all of the different parts of a hydraulic circuit.

Hydraulic Pump converts mechanical power into hydraulic energy. Hydraulic pumps create a vacuum at the pump inlet, which forces liquid from the reservoir into the inlet line and out to the outlet to the hydraulic system.

Hydraulic Motor is an actuator to convert hydraulic pressure into torque and rotation. It takes the pressure and flow of the hydraulic energy and changes it into rotational mechanical energy, similar to a linear actuator. The pump sends hydraulic energy into the system, where it pushes the hydraulic motor.

Hydraulic Cylinder converts the energy in the hydraulic fluid into force and initiates the pressure in the fluid that is controlled by the hydraulic motor.

Hydraulic Fluids transfer power in a hydraulic system. Most hydraulic fluids are mineral oil or water. The first hydraulic fluid was water before mineral oil was introduced in the twentieth century. Glycol ether, organophosphate ester, polyalphaolefin, propylene glycol, and silicone oil are used for high temperature applications and fire resistance.

Hydraulic lifts, in their many forms, have become an essential part of several industries from helping patients in and out of bed to specially designed lifts to help people board a bus. The number of uses of hydraulic lifts has been growing rapidly in recent years.

Table lifts are used to move items from the floor to a workable level. Transportation companies use them to lift materials onto a truck bed or warehouse floor.

Personnel lifts safely lift people to various heights for work or movement of materials, such as repair of electrical lines, placement of inventory on a shelf, or access to control boxes. In gyms, factories, and entertainment centers, they are used to lift janitorial staff to clean lights and ceilings.

Fork lifts are used for moving materials at construction sites, in warehouses, in factories, and for loading and unloading trucks and airplanes. They are designed to quickly move items from one location to another.

Medical lifts are lifting devices for surgical tables, hospital beds, and monitoring equipment. Hospital beds are a convenient means for moving patients from their rooms to treatment areas. Hydraulics control the height of all parts of the bed to make it more acceptable for hospital staff.

Post car lifts are a variation of automotive lifts. The vehicle to be repaired is suspended between two posts with hydraulic drives that have four arms. They are designed to lift any type of vehicle.

Pallet lifts are used for material handling and shipping. They function like a forklift and are able to lift pallets from ground level to load trucks, place on shelves, or move supplies to production lines.

Hand pumped lifts are raised by a manual hydraulic hand pump and have a release lever to lower the load. They are very sturdy and maintenance free with the ability to lift one ton over six feet.

VRCs, also known as vertical, vertical material, freight, and conveyor lifts, are classified by the American Society of Mechanical Engineers (ASME) as conveyors and related equipment and must comply with ASME B20.1. They are intended for moving materials only and not people. VRCs can be placed almost anywhere inside or outside a building and are designed to move materials of all shapes, sizes, and weights from the floor to mezzanines, balconies, basements, and various levels in a multiple level building.

VRCs offer more placement options than elevators and do not require separate machine rooms or feet of pit depth, making them space efficient. They feature structural supports and enclosed carriages that keep loads from falling, offering a safer and more efficient alternative to forklifts or scissor lifts.

The main components of a VRC are a guide column, carriage, and hydraulic actuating mechanism. VRCs can be mechanical or hydraulic with the hydraulic version capable of lifting loads weighing between 3,000 pounds and 6,000 pounds. Hydraulic VRCs are less costly to install than mechanical ones and perfect for lifting applications that are limited to two levels under 25 feet and do not require continuous cycle use.

Lift tables have become popular as work surfaces that can be positioned at the exact height necessary to package, assemble, organize, or position items. What makes lift tables different from adjustable tables is their capacity.

A standard lift table is able to lift 2000 to 6000 lbs. and can be lowered to 7 inches or raised to 60 inches with a work space of 24 to 72 inches. They come in a variety of shapes and sizes to fit any application. Below is a description of some of the varieties of lift tables.

Rotating hydraulic lift tables are a special type of lift table that have a rotating turntable that is recessed into the surface of the table for positioning a load, which makes the table accessible on four sides. The turntable rests on anti friction bearings such that it can turn easily and effortlessly. When it is not needed, it can be locked in position. Rotating hydraulic lift tables can be low profile hydraulic tables that can be lowered to a few inches off the floor for easy access by a pallet jack or forklift.

As with all hydraulic tables, rotating hydraulic tables are made of highly durable materials capable of lifting close to a ton of products and items. They are designed to perfectly and precisely position a load to prevent workers from having to manually lift materials.

Low profile lift tables have a collapsed height of a few inches allowing the table to be loaded using a hand truck or forklift. Since they do not require a pit or indent in the floor, they can be used on upper floors as well as the main floor. To activate the hydraulic lift of the table, there is a foot switch or push button remote.an operator can use that raises or lowers the table to a comfortable working height.

Stainless steel lift tables are mainly used in the food and pharmaceutical industries, where there are high standards for hygiene and sanitary conditions. The corrosion and rust resistance of stainless steel makes them easy to clean with solvents and water.

High capacity hydraulic lift tables are heavy duty tools designed to lift loads up to 60 tons with lifting heights of 52 inches up to 92 inches and platforms from 4’ by 6’ up to 10’ by 22’ with customized larger platforms available. They have scissor legs and torque tubes that add stability and exceptional support and prevent load deflection or shift.

The number of scissor legs and hydraulic cylinders vary according to the design of the table and the manufacturer. As with other hydraulic tables, high capacity tables can be activated by a handheld pendant or foot switch with an upper travel limit switch. Possible additional features include tilt tops, powered turntables, V cradles, and corrosion resistant finishes to name a few.

High capacity hydraulic lift tables are the workhorses of lift tables and are designed to withstand the stress and constant use of heavy duty machinery.

Ground entry lift tables have ground level access to the platform due to concerns regarding tripping or being in confined spaces. Access to the platform is by a cut away section in the shape of a "U" or "E", which makes them able to be loaded with an open bottom pallet or skid.

Tilting lift tables are for handling containers with loose parts. The platform lifts to an ergonomic height and tilted toward the operator, which reduces the need for bending and stretching. They are available with tilt angles of up to 90 degrees.

Tandem lift tables combine standard lifting with additional lifts of length or width providing the extra benefit of increased platform size to accommodate larger loads with extra edge and side load capacity.

Multi-stage lift tables stack one pair of scissor arms on top of another with one lift table on top of another, which increases vertical travel but maintains small platform size.

Hydraulic lifts are constructed from steel and have precision accuracy. Their sturdy and durable design has made them popular in a wide variety of industries. Listed below are a few of the industries that rely on hydraulic lifts for their efficiency and ability to supply a great amount of force.

Electro-hydraulics is a common use of hydraulics in industrial applications. The main advantages of hydraulics are its rapid response times and precision. Plastic processing, metal extraction applications, automated production, machine tool industry, paper industries, loaders, crushers, presses, and the textile industry are some of the industrial uses of hydraulics. The image below is a hydraulic press from the plastics industry.

Mobile hydraulics have the advantage of being able to be moved to different conditions and situations. They are especially useful in the construction and building industries where hydraulics are used as cranes, excavators, backhoes, and earth moving equipment. Pictured below is a concrete boom truck using a hydraulic arm to unload concrete.

The automotive industry is the largest user of hydraulics. Production, repair, and internal components on cars all use hydraulics.The image below shows the use of hydraulic automation in the production of trucks.

Marine hydraulics deliver linear and rotary force and torque rapidly and efficiently. The three types of marine hydraulic systems are open, closed, and semi-closed. They are used for cranes, mooring and anchor winches, stabilizers, steering, thrusters, propellers, and platforms.

Components for aircraft have to meet strict standards before being approved for use. Hydraulic pumps and valves meet aircraft regulations and are an essential part of aircraft design and production. Wing adjustments, retraction and extension of landing gear, opening/closing of doors, brakes, and steering are all performed by hydraulics. The image below provides a list of some of the ways hydraulics are used on an aircraft.

Hydraulics are ideal for mining for the same reasons that they are used for other manufacturing operations. Power, controllability, reliability, and serviceability are necessities in mining because of the dangers that are involved. Unlike other manufacturing, mining works on a huge scale requiring massive equipment. The power and force provided by hydraulics fits the conditions.

Hydraulics lifts are heavy duty equipment that can supply a great deal of force. The Occupational Safety and Health Administration (OSHA) and the American National Standards Institute (ANSI) have specific requirements regarding the operation of hydraulic lifts. The first of those requirements is that operators must be an adult, over 18, that have been fully trained in the operation and dangers of the equipment.

detailed information regarding the responsibilities of manufacturers, users, owners, and operators with a clearer statement of the requirements for scissor lifts.

B20.1 is a set of safety standards for conveyors and related equipment, under which fall vertical reciprocating conveyors that are designed to operate like an elevator for lifting huge materials between floors in a building. The standards of B20.1 apply to the design, construction, installation, maintenance, inspection, and operation of VRCs in regard to possible hazards and potential dangers. First published in 1947, B20.1 has been edited multiple times over the years to match the ever changing technology of VRCs with the last edits being made in 2021, which cover gates and enclosures.

The principle for hydraulic lifts is based on Pascal‘s law for generating force or motion, which states that pressure change on an incompressible liquid in a confined space is passed equally throughout the liquid in all directions.

The Occupational Safety and Health Administration (OSHA) and the American National Standards Institute (ANSI) have specific requirements regarding the operation of hydraulic lifts and training for operators.

Lift tables have become popular as work surfaces that can be positioned at the exact height necessary to package, assemble, organize, or position items.

Complete replacement hydraulic POWER UNIT for most lifts or hoists. ETL Certified. Includes hydraulic tank, pump, motor & switch. Stone (Fenner) brand. Assembled in the...