single gear hydraulic pump factory

As the new member of the Hydro product range, the hydraulic diaphragm metering pump Hydro/ 2 API 675 (HA2a) meets the requirements of API 675. The pumps stand ...

The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To reduce heat loss, Rexroth external gear ...

... and accessibly priced, aluminium gear pumps and motors are among the components most widely utilized in the field of hydraulic applications. Gear pumps ...

Gear pump with reversible Rotation direction and internal drainage. Built in aluminium body, lighter than casting pumps, permits to work at high pressures with a low level of noise.

Gear pumps with heavy duty body, side and rear ports. Double support by taper roller bearings on the agricultural shaft with modified length. Specialty: agriculture long shaft.

Like all the pumps of the HP Series, it is suitable for any hydraulic application which require very high hydraulic output pressures and a moderate and controllable oil flow, to ensure ...

The HP-AP pump, like all HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series air-hydraulic ...

The HP-RC pump, like all the HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series ...

Three piece pumps with aluminum body and flanges, available in single or multiple pump configurations. Stackable with pumps of different families. Wide range of shafts and flanges. Configurations ...

The product range of Bucher Hydraulics includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, ...

... describes Marzocchi external single gear micropumps, ¡heir operating features and hew to select the right pump for the required application. Miaopumps are small hydraulic ...

This electric/hydraulic pump is a two-stage, continuous pressure (demand) pump that contains all the necessary controls and circuitry for powering any single- or double-acting

Gear pumps GP1K Group 1 is an Ideal solution for hydraulic power packs. Modern technologies and many years of experience of the HYDROSILA company allow us to create pumps ...

The pump series Eco-MAX developed by ITH is built for standard applications like service and assembly jobs. The pump series is available in two different designs:

The OMFB offers wide array of gear pumps available for utilization in applications that requires medium, high and very-high pressure of up to 320 bar maximum. These pumps also strictly ...

The pump with a maximum flow rate of 300 bar is specially designed to lessen a volume by means of a fixed crank-driven piston within a cylinder. It has 3 and 4 bolt ISO flange, swash plate and bent axis design piston ...

Hydraulic systems are in general members of the fluid power branch of power transmission. Hydraulic pumps are also members of the hydraulic power pack/hydraulic power unit family. Hydraulic units are encased mechanical systems that use liquids for hydraulics.

The hydraulic systems that hydraulic pumps support exist in a range of industries, among them agriculture, automotive manufacturing, defense contracting, excavation, and industrial manufacturing. Within these industries, machines and applications that rely on hydraulic pumps include airplane flaps, elevators, cranes, automotive lifts, shock absorbers, automotive brakes, garage jacks, off-highway equipment, log splitters, offshore equipment, hydraulic motors/hydraulic pump motors, and a wide range of other hydraulic equipment.

When designing hydraulic pumps, manufacturers have many options from which to choose in terms of material composition. Most commonly, they make the body of the pump–the gears, pistons, and hydraulic cylinders–from a durable metal material. This metal is one that that can hold up against the erosive and potentially corrosive properties of hydraulic fluids, as well as the wear that comes along with continual pumping. Metals like this include, among others, steel, stainless steel, and aluminum.

First, what are operating specifications of their customer? They must make sure that the pump they design matches customer requirements in terms of capabilities. These capabilities include maximum fluid flow, minimum and maximum operating pressure, horsepower, and operating speeds. Also, based on application specifications, some suppliers may choose to include discharge sensors or another means of monitoring the wellbeing of their hydraulic system.

Next, what is the nature of the space in which the pump will work? Based on the answer to this question, manufacturers will design the pump with a specific weight, rod extension capability, diameter, length, and power source.

Manufacturers must also find out what type of substance does the customer plan on running through the pumps. If the application calls for it, manufacturers can recommend operators add other substances to them in order to decrease the corrosive nature of certain hydraulic fluids. Examples of such fluids include esters, butanol, pump oils, glycols, water, or corrosive inhibitors. These substances differ in operating temperature, flash point, and viscosity, so they must be chosen with care.

All hydraulic pumps are composed in the same basic way. First, they have a reservoir, which is the section of the pump that houses stationary fluid. Next, they use hydraulic hoses or tubes to transfer this fluid into the hydraulic cylinder, which is the main body of the hydraulic system. Inside the cylinder, or cylinders, are two hydraulic valves and one or more pistons or gear systems. One valve is located at each end; they are called the intake check/inlet valve and the discharge check/outlet valve, respectively.

Hydraulic pumps operate under the principle of Pascal’s Law, which states the increase in pressure at one point of an enclosed liquid in equilibrium is equally transferred to all other points of said liquid.

To start, the check valve is closed, making it a normally closed (NC) valve. When the check is closed, fluid pressure builds. The piston forces the valves open and closes repeatedly at variable speeds, increasing pressure in the cylinder until it builds up enough to force the fluid through the discharge valve. In this way, the pump delivers sufficient force and energy to the attached equipment or machinery to move the target load.

When the fluid becomes pressurized enough, the piston withdraws long enough to allow the open check valve to create a vacuum that pulls in hydraulic fluid from the reservoir. From the reservoir, the pressurized fluid moves into the cylinder through the inlet. Inside the cylinder, the fluid picks up more force, which it carries over into the hydraulic system, where it is released through the outlet.

Piston pumps create positive displacement and build pressure using pistons. Piston pumps may be further divided into radial piston pumps and axial piston pumps.

Radial pumps are mostly used to power relatively small flows and very high-pressure applications. They use pistons arranged around a floating center shaft or ring, which can be moved by a control lever, causing eccentricity and the potential for both inward and outward movement.

Axial pumps, on the other hand, only allow linear motion. Despite this, they are very popular, being easier and less expensive to produce, as well as more compact in design.

Gear pumps, or hydraulic gear pumps, create pressure not with pistons but with the interlocking of gear teeth. When teeth are meshed together, fluid has to travel around the outside of the gears, where pressure builds.

External gear pumps facilitate flow by enlisting two identical gears that rotate against each other. As liquid flows in, it is trapped by the teeth and forced around them. It sits, stuck in the cavities between the teeth and the casing, until it is so pressurized by the meshing of the gears that it is forced to the outlet port.

Internal gear pumps, on the other hand, use bi-rotational gears. To begin the pressurizing process, gear pumps first pull in liquid via a suction port between the teeth of the exterior gear, called the rotor, and the teeth of the interior gear, called the idler. From here, liquid travels between the teeth, where they are divided within them. The teeth continue to rotate and mesh, both creating locked pockets of liquid and forming a seal between the suction port and the discharge port. Liquid is discharged and power is transported once the pump head is flooded. Internal gears are quite versatile, usable with a wide variety of fluids, not only including fuel oils and solvents, but also thick liquids like chocolate, asphalt, and adhesives.

Various other types of hydraulic pumps include rotary vane pumps, centrifugal pumps, electric hydraulic pumps, hydraulic clutch pumps, hydraulic plunger pumps, hydraulic water pumps, hydraulic ram pumps, portable 12V hydraulic pumps, hydraulic hand pumps, and air hydraulic pumps.

Rotary vane pumps are fairly high efficiency pumps, though they are not considered high pressure pumps. Vane pumps, which are a type of positive-displacement pump, apply constant but adjustable pressure.

Centrifugal pumps use hydrodynamic energy to move fluids. They feature a rotating axis, an impeller, and a casing or diffuser. Most often, operators use them for applications such as petroleum pumping, sewage, petrochemical pumping, and water turbine functioning.

Electric hydraulic pumps are hydraulic pumps powered by an electric motor. Usually, the hydraulic pump and motor work by turning mechanisms like impellers in order to create pressure differentials, which in turn generate fluid movement. Nearly any type of hydraulic pump can be run with electricity. Most often, operators use them with industrial machinery.

Hydraulic clutch pumps help users engage and disengage vehicle clutch systems. They do so by applying the right pressure for coupling or decoupling shafts in the clutch system. Coupled shafts allow drivers to accelerate, while decoupled shafts allow drivers to decelerate or shift gears.

Hydraulic ram pumps are a type of hydraulic pump designed to harness hydropower, or the power of water, to elevate it. Featuring only two moving hydraulic parts, hydraulic ram pumps require only the momentum of water to work. Operators use hydraulic ram pumps to move water in industries like manufacturing, waste management and sewage, engineering, plumbing, and agriculture. While hydraulic ram pumps return only about 10% of the water they receive, they are widely used in developing countries because they do not require fuel or electricity.

Hydraulic water pumps are any hydraulic pumps used to transfer water. Usually, hydraulic water pumps only require a little bit of energy in the beginning, as the movement and weight of water generate a large amount of usable pressure.

Air hydraulic pumps are hydraulic pumps powered by air compressors. In essence, these energy efficient pumps work by converting air pressure into hydraulic pressure.

Hydraulic pumps are useful for many reasons. First, they are simple. Simple machines are always an advantage because they are less likely to break and easier to repair if they do. Second, because fluid is easy to compress and so quick to create pressure force, hydraulic pumps are very efficient. Next, hydraulic pumps are compact, which means they are easy to fit into small and oddly shaped spaces. This is especially true in comparison to mechanical pumps and electrical pumps, which manufacturers cannot design so compactly. Speaking of design, another asset of hydraulic pumps is their customizability. Manufacturers can modify them easily. Likewise, hydraulic pumps are very versatile, not only because they are customizable, but also because they can work in places where other types of pump systems can’t, such as in the ocean. Furthermore, hydraulic pumps can produce far more power than similarly sized electrical pumps. Finally, these very durable hydraulic components are much less likely to explode than some other types of components.

To make sure that your hydraulic pumps stay useful for a long time, you need to treat them with care. Care includes checking them on a regular basis for problems like insufficient fluid pressure, leaks, and wear and tear. You can use diagnostic technology like discharge sensors to help you with detect failures and measure discharge pressure. Checking vibration signals alone is often not enough.

To keep yourself and your workers safe, you need to always take the proper precautions when operating or performing maintenance and repairs on your hydraulic pumps. For example, you should never make direct contact with hydraulic fluid. For one, the fluid made be corrosive and dangerous to your skin. For two, even if the pump isn’t active at that moment, the fluid can still be pressurized and may potentially harm you if something goes wrong. For more tips on hydraulic pump care and operation, talk to both your supplier and OSHA (Occupational Safety and Health Administration).

Pumps that meet operating standards are the foundation of safe and effective operations, no matter the application. Find out what operating standards your hydraulic pumps should meet by talking to your industry leaders.

The highest quality hydraulic pumps come from the highest quality hydraulic pump manufacturers. Finding the highest quality hydraulic pump manufacturers can be hard, which is why we have we listed out some of our favorites on this page. All of those whom we have listed come highly recommended with years of experience. Find their information nestled in between these information paragraphs.

Once you have put together you list, get to browsing. Pick out three or four hydraulic pump supply companies to which you’d like to speak, then reach out to each of them. After you’ve spoken with representatives from each company, decide which one will best serve you, and get started on your project.

Gear Pump Manufacturing (GPM) manufactures a complete range of internationally interchangeable commercial components for Bearing gear pumps, Bushing gear pumps, Motors and Flow Dividers.

Hydraulic pumps are important parts of a wide variety of products and processes. In industrial machinery, they are used for the transmission of hydraulic fluid from reservoirs to actuators like cylinders and pistons.

In commercial settings, hydraulic pumps are sometimes employed in the supply of hydraulic fluid to elevators. Hydraulic pumps can also be used in several different consumer products contexts. In rural residences, hydraulic water pumps are often used to transmit water from wells to consumer utilities such as faucets and washing machines. Some of these hydraulic pumps are examples of gear pumps. Gear pumps can be operated in a number of ways. Electric hydraulic pumps are often equipped with gears as a method of transmitting liquid from one area to another. Many other gear pump varieties are powered by gas motors. Hydraulic gear pumps are used in the automotive, agricultural, construction, defense contracting and manufacturing industries.

Both kinds of gear pumps supply a regular amount of liquid for every rotation of the gears. Hydraulic gear pumps are favored because of their relatively simple design, their versatility and their effectiveness. Also, because they are available in multiple configurations, they can be applied in a wide variety of contexts in industry as well as in commercial and consumer products contexts.

Because of the wide variety of contexts in which hydraulic pumps are used, and because of the varying kinds of tasks that require the use of pumps within each of those contexts, the demand for hydraulic gear pumps, as well as many other hydraulic pump varieties, is likely to remain for the foreseeable future.

AeroControlex began manufacturing pumps in Cleveland, Ohio in 1945. Over the years, AeroControlex has established itself as an industry leader in the production of hydraulic, fuel, lube and scavenge, centrifugal and coolant pumps. Our worldwide customer base demands the highest quality, cost effective products for the most demanding commercial and military applications.

All World Machinery Supply offers high-quality, affordable pumps, motors, and power units from reputable brands like Daikin, Nachi, Eaton, Tokimec, NOP, Grundfos, Yuken, and Fuji . Our team of representatives and engineers can find or cross any pump/mortor to what you are looking for. We can even help you design a custom application suited to your fit your needs.

American Eagle Accessories Group is a manufacturer of truck equipment accessories. These products include: hydraulic-driven air compressors, drawer systems (tool storage), bolt bins (fastener and fitting storage), lube skids, lube trailers, fuel trailers, and utility construction trailers. All of our products are designed and manufactured in the U.S.A.

Founded in 1991, AZ Hydraulic Engineering manufactures high quality air-operated hydraulic pumps serving a broad clientele. We offer hydraulic piston pumps, power units, tank pumps and more with 25 different pressure ranges up to 50,000PSI and a proven track record for reliability and easy, low cost maintenance. AZ Hydraulics is the source for quality hydraulic pumps and friendly customer service.

Barbee Engineered Testing Systems is a manufacturer of hydraulic power units, hydraulic valve testers, air-driven hydraulic piston pumps, high pressure pumps, hydraulic power systems, high pressure systems and more. Our hydraulic pumps are available with up to 30,000 PSI. Check out our website.

Bosch Rexroth is a global leader in manufacturing industrial hydraulics, including proportional and servo valves. Directional control, high response, flow control, pressure relief, pressure reducing, and servo valves name some of our products. Our rugged valves are a perfect fit your electrohydraulic control applications. A variety of models are available for your viewing on our website.

Brand Hydraulics is a leading designer and manufacturer of high-quality hydraulic valves including hydraulic directional control valves, hydraulic flow control valves, hydraulic relief valves, hydraulic selector valves, shuttle valves, pilot check valves, flow dividers and more. Brand also has a line of quality hand-operated hydraulic pumps. Premium hydraulics since 1956.

For 40 years, Bucher Hydraulics Inc. has specialized in hydraulic systems, including products such as hydraulic motors, hydraulic pumps and hydraulic power units. Applications include concrete pumps, forage wagons, harvesters, lifting devices, recycling machines, door openers, log splitters and many others.

At Cascon, our success is our ability to build up long term business relationships with each and every customer. We accomplish by delivering innovative, cost-effective, customer designed hydraulic gear pump solutions together with the technical support. Whatever you may be looking for, trust Cascon to fulfill your hydraulic gear pump needs. Get in touch with our company.

CLYDEUNION Pumps is one of the world"s leading pump companies - a centre of excellence in Pump Technology, Hydraulic Design and Engineering. We are structured to provide a specific focus on each of our customer"s key markets as well as providing full global aftermarket support. CLYDEUNION Pumps incorporates an accumulation of over 300 years of engineering expertise.

D&D Machine & Hydraulics Inc, located in Fort Myers, Florida, is a manufacturer of hydraulically driven, submersible pumping systems that serves the Agricultural, Construction, Industrial, Mining, Petroleum and Municipal markets worldwide. D&D builds electric or diesel-driven Power Units and Axial Flow, Trash, Sludge, Slurry/Digester and Mixed Flow pump heads. If a standard pump will not meet the performance needed for a special application, D&D’s wide range of specialty pumps can meet your individual requirement.

Danfoss will drive your vehicle transmission to a new level of performance with our Danfoss piston pumps and motors. Designed for intelligent vehicle management systems, our range brings you closer to your goals for reduced fuel consumption and high operator comfort. We deliver components and systems for machine from 15 to 2500 horsepower.

Eaton Hydraulics designs, manufactures and markets a comprehensive line of reliable, efficient hydraulic systems and components including hydraulic motors, hydraulic power units and other hydraulic systems. We serve various markets and applications with our quality systems and accessories.

Welcome to the Florida Hydraulic Industrial web site. Browse our categories for hydraulic pumps, hydraulic cylinders, hydraulic and industrial hose, including a wide variety of pressure washer hose, all common hydraulic hose fittings.

Established in 1978, Gator Pump manufactures high volume pumps for irrigation, flood control, liquid waste pumping and many other applications. Steel fabricated hydraulic pumps are offered in several different sizes and configurations including vertical pumps, floating pumps and trailer pumps as well as custom pumps operated on electric, diesel or hydraulics to suit clients" needs. Call us today!

We provide a number of different styles of air driven high pressure hydraulic pumps ranging from 100 PSI to 60,000 PSI. Here at High Pressure Technologies, LLC we take customer satisfaction very seriously which is why we can customize our products to match your requirements. It is our goal to exceed your expectations. Please visit our website or give us a call today to learn more information!

With discharge sizes from 2” to 30”, our hydraulically driven submersible pumps offer customers the chance to select a pump tailored to a specific pumping condition. Hydra-Tech was founded in 1977 giving them over 40 years of experience in the pump industry. Our pumps are offered in a variety of materials including ductile iron, aluminum and stainless steel.

Since our beginning in 1947, Hydraulic Supply Company (HSC) has been dedicated to fulfilling customers’ needs. We are a full service distributor of fluid power products and services. We carry a selection of over 20,000 hydraulic, pneumatic and industrial products in stock from the most recognized brands in the industry. Our goal is to provide customers with a large selection of hydraulic, pneumatic and industrial products with the best professional services, right when you need them.

Made-to-order & made-to-last custom hydraulic pumps faster than you can expect from other companies. The widest selection of hydraulic gear pumps & piston pumps, plus stock replacement pumps ready for immediate shipment. Brands: Webster, Danfoss, Barnes, Haldex, Cessna, Eaton, Vickers, etc. Hydraulic.Net’s specialization is in short run special application gear pumps with little tooling expense.

Hydraulics International, Inc. (HII) established in 1976 is a leading provider of High Pressure Test Units including Flushing Systems, Nitrogen Charging Systems, Control Panels, Chemical Injection Pumps, Air Powered Hydrostatic Piston Pumps, Gas Boosters, Air Pressure Air Amplifiers, and Turbine Flow Meters on a global basis. Since inception, HII has maintained an intense focus on design and engineering, striving to stay at the forefront of the Fluid Power technological advances. 100% USA made.

Here at Hydreco we manufacture hydraulic solutions for a number of markets including: agricultural, municipal, construction, mining and transportation. Our company has an extensive history of engineering success. If you are unsure what hydraulic products are best for your task then just let one of our representatives know your application and we can handle the rest!

Over 50 years, Hydro Leduc has developed more than 100 patents because of our passion for innovation in the hydraulics field. We find solutions to our customers’ most complex and demanding applications for piston pumps, hydraulic motors, hydro-pneumatic accumulators and custom hydraulic components.

HYTORC developed the jet series pumps which are portable, heavy duty, light weight, high flow to withstand harsh environments. These air or electric driven Hydraulic Pumps are engineered for continuous, non-stop use in harsh environments. If used on Torque Tools, Jacks, Cutters, Presses or Bending equipment, their reliability is unmatched by any other Hydraulic Power Pack.

We are a distributor of hydraulic and pneumatic products such as hydraulic pumps, filters, motors, valves and more. Our manufacturers make hydraulic gear pumps, piston pumps and hydraulic pumps with aluminum or cast iron casings. We have been in business for 30 years and service all of our products.

We are a distributor of hydraulic and pneumatic products such as hydraulic pumps, filters, motors, valves and more. Our manufacturers make hydraulic gear pumps, piston pumps and hydraulic pumps with aluminum or cast iron casings. We have been in business for 30 years and service all of our products.

Founded in 1971, Interface Devices is a world-class designer and manufacturer of air driven fluid pumps, hydraulic valves and custom engineered fluid power products. IDI proudly designs and manufactures all our products at our Milford, CT facility. As we continue to grow and develop it is our principle aim to provide quality in our designs and manufacturing while responding to customer needs.

Jones Hydraulic Service is proud to be serving the energy, marine, petrochemical, railroad, construction, foundation repair, pipeline and shipyard industries since 1977. Jones Hydraulic represents some of the world’s leading Hydraulic Tool & Equipment manufacturers that include SPX Power Team, SafeWay Hydraulics, Pell Hydrashear, TORC LLC, Eagle Pro, and more. Offering Hydraulic Tool & Equipment Sales, Service and Repair for 40 years.

Our Maximator® air-driven hydraulic pumps deliver from 60 to 60,000 PSI and cycle automatically. The Maximator® pumps are used in our hydraulic power units. We can provide you with standard or customized high pressure pump power systems. Repair and refurnishing services also available.

We make hydraulic gear pumps that are essential for many applications and purposes. This hardware is tested for durability and strength tolerances which means you are guaranteed to receive reliable products. Our world-class products come with short lead time and we put an emphasis on the quality of our hydraulic gear pump devices. Give us a call today to learn more!

Our Hydraulics Division, headquartered in Greenwood Indiana, is a world-class manufacturer of pumps, valves, flow controls, hydraulic power units and other products. We are known not only for our product excellence but for our competitive pricing and the ready availability of our products when customers need them.

Sales, service and rental for all major brands of hydraulic pumps and other air, electric and hydraulic equipment. Hydraulic pump offerings include hand pumps, air pumps, electric pumps, gas pumps and intensifiers. Highly skilled at matching tool to application for hydraulic pumps and more.

Oilgear heavy-duty axial piston hydraulic pumps are built. Engineered with Oilgear’s advanced “hard-on-hard” rotating group and hydrodynamic bearing support on the cylinder barrel, our pumps provide longer operational life and optimal resistance to contamination. Available in a variety of frame sizes and control options, Oilgear offers just the right pump to fit your demanding needs.

We sell hydraulic pumps designed for a variety of industries. Our manufacturing facility houses many late model pumps and components. It’s our promise as the premiere hydraulic pump manufacturers in the USA that our highly affordable pumps will meet or exceed the original component specification. There’s no question that with our hydraulics in place your equipment will continue to operate as efficiently as ever. Contact us today for more information!

Parker"s Hydraulic Pump and Power Systems Division provides a broad selection of piston pumps, hydraulic motors and power units that help our customers meet their industrial and mobile application needs.

The Parker Pump & Motor Division specializes in gear pumps and motors used in a myriad of industries. With decades of experience, PMD provides the best products in the market, supplemented by best-in-class customer service, and the deepest knowledge in the industry.

Perfection Hydraulics manufactures, distributes, and services hydraulic cylinders, hydraulic pumps, hydraulic valves, hydraulic gear pumps, and other hydraulic components for heavy equipment. Our products provide you with the best value available for today’s dynamic industry. With our reputation for quality and reliability, you can rely on us for your heavy duty hydraulics needs.

Pierce Sales is a manufacturer and distributor of 12-volt hydraulic pumps, hydraulic hoses, hydraulic fittings, tie-rod cylinders and many more products. We offer professional installation services. We also have spare parts and provide repair services to get your equipment running as soon as possible.

Precision Fluid Power is a distributor of hydraulic pumps, including hydraulic vane pumps, hydraulic piston pumps and hydraulic gear pumps. We provide new hydraulic motors or we rebuild them, as well as hydraulic valves and hydraulic cylinders. We also offer hydraulic pump repair. Call us today.

SC Hydraulic Engineering has been a leader in the design & manufacture of various air-powered hydraulic pumps, hydraulic piston pumps, hydraulic power units and systems plus hydraulic valves—relief, inline check, high pressure. We also have the ability to customize our products to fit your needs. In business since 1953, we work worldwide through distributors and manufacturers.

Our talented teams of designers and engineers will work closely with you to provide you with a custom hydraulic pump that will be exactly what you need and sure to last a lifetime! We are committed to ensuring that you receive excellent product quality, outstanding delivery, competitive pricing and superior customer service to keep you coming back to us! For more information visit our website today or send us an email to get started!

Since 1899, SIMPLEX products have been used by industries that need hydraulic and mechanical equipment and solutions. Our continuous duty hydraulic pumps are equipped for up to 5HP, as are our gas, air & electric hydraulic pumps for heavy-duty tooling applications. Our positioning and lifting products turn challenges into progress.

Established in 1979, Southwest Seal and Supply has grown to become one of the most predominant distributors of sealing, hydraulic hoses, fittings, couplings/connectors, gasketing and fluid control products in the Southwest. We offer a wide range of products including the best in selection, quality, and value-added services.

Stone Hydraulic Systems manufactures AC and DC hydraulic power units for a broad range of OEM applications such as auto hoists, dock levelers, hose crimpers, lift tables and compactors to name a few. Stone"s products provide a wide power range up to 5.5 horsepower.

SRS Crisafulli hydraulic-powered pumps handle industrial-strength pumping jobs: trash, mud, waste, raw sewage, sludge. Discharge sizes 2" to 24" and flows to 18,000 GPM. Standard Power Unit models in electric, diesel or gas, 32 to 180 horsepower, outputs from 18 to 119 GPM or custom built to your spec.

TK Trailer Parts is a dedicated manufacturer of high quality products. We are a turnkey supplier of hydraulic cylinders, hydraulic pumps, hydraulic valves, and much more. If you need assistance with find the right solution for you then feel free to reach out to one of our representatives.

Serving customers worldwide since 1911 with our innovative positive displacement pumping solutions, including custom designs. For even the toughest industrial, OEM & sanitary applications, we manufacture Vane Pumps, Internal & External Gear Pumps & more.

Willman Industries is a large, independent, jobbing foundry, located in Cedar Grove, Wisconsin. We produce all types of gray iron and ductile iron components, ranging from ounces to 40,000 lbs. Thin-walled exhaust manifolds, heavy-section hydraulic pumps, valves, housings, flywheels, clutch plates, machine tools, power generating equipment are typical of our product mix.

Zinko Hydraulic Jack is a leading manufacturer of high-quality hydraulic products. In addition to our namesake hydraulic jacks, we provide scissor jacks and aluminum jacks as well as hydraulic cylinders, lifts and other material handling equipment. At Zinko, your needs are met with a diverse inventory of quality hydraulic pumps including air pumps, hand pumps, electric hydraulic pumps and more.

Hydraulic Pumps are one of the most important parts of a hydraulic system. International Fluid Power, Inc. offers of full line of pressure loaded fixed displacement hydraulic gear pumps to meet your needs. Pump displacement ranges from .16cc to 89cc. Standard SAE AA, A, or B mounts with keyed or splined shaft offerings. Straight gear, helical gear, or incline gear styles are available to help meet any noise reduction requirements you may encounter. Aluminum body with cast iron mount and cap are standard. Hi-Lo pumps are also included in our offering.

Brevini Fluid Power is a leading manufacturer of hydraulic components in Italy and Europe. Its headquarters is located in Reggio Emilia, Italy and has direct subsidiaries in Italy, France, England, The Netherlands, Germany, Romania, China, India, Singapore and the USA.

Dynamic Fluid Components, Inc. is an ISO 9001:2008 quality certified company offering a full range of hydraulic products and supported by a full service test and repair facility. Dynamic Fluid Components, Inc. product offerings include, fixed displacement hydraulic gear pumps, including a dual stage HI/LO pump, low speed high torques hydraulic motors, flow control valves, check valves, pressure gauges, pressure switches and hydraulic pressure test points and diagnostic testing kits.

Brevini Fluid Power is a leading manufacturer of hydraulic components in Italy and Europe. Its headquarters is located in Reggio Emilia, Italy and has direct subsidiaries in Italy, France, England, The Netherlands, Germany, Romania, China, India, Singapore and the USA.

For many years FluiDyne has provided our customers with professional and competitive services and products. Our Promise is to serve and respect the distributors and resellers of North America and the global market with high quality new and remanufactured pumps, motors, valves, filters and filter elements.

Norman Equipment has been a leading supplier of hydraulic equipment including hydraulic piston pumps and motors for over 70 years. Full-line authorized stocking distributor of quality hydraulic components and systems from top manufacturers renowned for performance and reliability.

We recommend using the piston pumps in high-pressure applications. In some cases, it is more economical to run a piston pump compensated that puts out a very low output flow until needed. This lowers electric cost and pump wear that may reduce system down time.

Norman currently stocks the Parker Denison PV (PVP) units and is part of the Parker Denison Distribution Network if another unit is needed that is not in stock at Norman Equipment. Denison is one of the most recognized names in hydraulic units in the world. For many years, their products were recognized by their distinctive blue color. Today, the Denison brand is part of the Parker-Hannifin family and all pumps are painted black.

For the past 50 years, Shimadzu gear pumps have achieved total customer satisfaction through high efficiency, stable performance, and superior durability. Our gear pumps are used in wide range of applications, including material handling equipment, specially-equipped vehicles, construction, and agricultural machinery.

Parker is a global manufacturer of hydraulic pumps, transmissions, gear pumps and motors, engineering superior products for a wide variety of applications. Delivering unsurpassed quality and performance, Parker’s extensive line of hydraulic pumps and motors helps you select the right product for your hydraulic application. Achieve easier, safer, and more efficient operation. The Pump & Motor Division assures consistent quality, technical innovation, and premier customer service.