single phase hydraulic pump quotation

... HP-LEVER pump of the HP Series is a single-acting air-hydraulic pump with manual operation with an ergonomic lever. It has an oil flow rate of 2.4 to 0.1 l / min and ...

We produce double-acting air-hydraulic pumps with pedal drive and Cetop3 flanged connection available in different models with oil flow rates from 2.6 to 0.15 l / min and operating pressures up to 1000bar.

... pinion-shaft technology, high pressures up to 280 bar are developed in a single stage. QXEH pumps are therefore particularly well suited for a wide range of applications in industrial ...

Available with all piston options, this single-stage pump is a continuous pressure, reciprocating, stall-type pump: air pressure is simply converted to hydraulic ...

Double-acting, single-stage air-powered compact pump. Standard with a 3/8” NPT female thread and compressed air connector. Excluding coupler, hoses and pressure gauge.

Hydraulic single gear pump for sale. Available displacement 13/15/18/20 Max. GPM, maximum pressure 3600 psi, speed 500~3500 rpm, optional clockwise or counterclockwise rotary. The small hydraulic gear pump has applications in automobile, hardware, industrial machinery, textile, commercial machinery, chemical equipment, environmental protection, military industry, national defense, etc.

Hydraulic single gear pump uses high-strength aluminum alloy shell and alloy steel hard gear transmission, which is light in weight and stable in transmission.

Hydraulic single gear pump is suitable for SAE standard flange installation. The input shaft connection is woodruff key. Connection type of the oil inlet and outlet ports is thread.

Hydraulic single gear pump has an automatic compensation mechanism for axial and radial clearances, which enables the oil pump to maintain high volumetric efficiency and high mechanical efficiency for a long time.

DU composite material bearings and high-performance sealing elements, small starting torque, good sealing performance, and strong anti-fouling ability, so that hydraulic single gear pump can work efficiently under harsh working conditions.

20 GPM hydraulic single gear pump internal parts wear and tear will cause internal leakage. Among them, the large leakage area between the floating shaft sleeve and the gear end surface is the main part that cause internal leakage. This part of leakage accounts for about 50% to 70% of the total internal leakage. For the 20 GPM hydraulic single gear pump with internal leakage, its volumetric efficiency drops, and the output power is much lower than the input power. All of its losses are converted into heat, which will cause the 20 GPM hydraulic single gear pump to overheat. If the bonding plane is pressed tightly, a small amount of movement of the floating shaft sleeve during work will cause abrasion. As a result, the oil cylinder will rise slowly or cannot be lifted. Such floating shaft sleeves must be replaced or repaired.

Model EZ-F20 is an all aluminium construction, high pressure Hydraulic Gear Pump with 8 displacement sizes from 0.24 to 1.52 cu.in/rev. (4 to 25 cm3/rev).

This single-acting hydraulic power unit has a 220V AC motor (Power:2.2kw) and a 10-liter metal reservoir; The max relief pressure is set at 2950 PSI. The rated speed: 2850 r/min.

Our hydraulic electric pump is fully assembled. It"s designed with a convenient start button and control handle and comes with additional connectors. The whole power unit is easy to wire and easy to operate.

With the powerful electric motor, our hydraulic pump for car lifts can start rapidly and provide quick oil output. In addition, it can provide strong power that will lift cars in a short period.

You can rely on the quality of this electric hydraulic pump as it is made of special-treated sturdy metal, and the whole structure has been reinforced. It is also equipped with a powerful motor that you can use as often as you like.

This car lift power unit has been pre-assembled before delivery, and it can be installed horizontally or vertically. We provide instructions for operation so that you can install and use the hydraulic pump easily.

This hydraulic pump has been widely used as a power unit for hydraulic systems like car lifts to lift cars for repair, it can also be used for scissor lift, aerial platform, wheelchair lifts, etc.

Northern Hydraulics offers a full line of two stage Hi-Lo hydraulic gear pumps for your log splitters, compactors, and press type applications. Haldex/Concentric pumps have a cast iron gear housing and are available in flows ranging from 9 GPM to 28 GPM. These hydraulic two stage pumps are designed for heavy duty use and long cycle times. The Haldex brand assures you are getting top quality, high performing products. Northern Hydraulics replacement pumps also have a cast iron gear housing and are available in flows ranging form 5 GPM to 28 GPM. These Hi-Lo log splitter pumps are ideal for the recreational woodsplitter user, as they are still a quality product, but offered at a much lower price point.

We have available to buy ready built single phase motor pump units with motor sizes ranging from 0.75 to 3.00 Kw and pump flow rates from 1.35 to 6.30 L/min, please select the unit that best suits your requirements from below.