skf hydraulic pump quotation

The 729124 pumpis suitable for use with hydraulic nuts (smaller than or equal to HMV 54E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14,500 psi) is required. The pump is supplied with 1 500 mm (59 in) pressure hose, quick connect coupling and mating nipple and pressure gauge. The pump is filled with SKF mounting fluid LHMF 300 and is supplied with an extra litre of fluid. For applications where space does not permit the use of a quick connect coupling and nipple, such as AOH sleeves, a special pump design is available (729124 A).

The 728619E is a two-stage pump suitable for use with SKF Supergrip bolts and for the mounting and dismounting of bearings or components where a maximum pressure of 150 MPa (21,750 psi) is required. The pump is supplied with a 3 000 mm (118 in) pressure hose, quick connect coupling and mating nipple and pressure gauge. The pump is filled with SKF mounting fluid LHMF 300, is supplied with an extra litre and is protected in a sturdy metal case.

The 729124 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 54E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14 500 psi) is required. The pump is supplied with 1 500 mm (59 in.) pressure hose, quick connect coupling and mating nipple and pressure gauge. The pump is filled with SKF Mounting fluid LHMF 300 and is supplied with an extra litre of fluid.

Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF

The THAP E air-driven oil injectors are used for mounting and dismounting OK couplings, for dismounting large pressure joints such as bearings, flywheels, couplings, railway wheels and in many similar applications. The pumps consist of a high pressure hydraulic pump, driven by an air piston. The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings.The air driven pumps can also be supplied in complete sets which consists of pump, pressure gauge, high pressure pipe and connection nipples. They are particularly suitable for mounting and dismounting large pressure joints. This includes applications such as SKF OK Couplings, flywheels, gear wheels, railway wheels and impellers. Compared to hand operated oil injectors, the use of air-driven oil injectors can save considerable time and effort.The THAP 030E is designed to have an oil outlet pressure of 30 MPa (4 350 psi). Depending on the maximum oil pressure required, they are suitable for applications such as bolt tensioning and pressurizing large hydraulic nuts. Compared to hand operated oil pumps, the use of air-driven oil pumps can save considerable time and effort.The THAP ...E series contains an oil pump or injector driven by an air motor, with the air pressure internally limited to 7 bar, which is used to produce high oil pressure.The THAP ...E series are delivered ready for use. They are supplied in a transport box and include suction and return hoses with quick-connection couplings. They are equipped with a male G 3 /4 nose piece, which is intended to be screwed directly into the workpiece. As an alternative, they can be used in combination with the appropriate SKF hydraulic accessories.

Hydraulic pumps and injectors facilitate the mounting and dismounting of components such as bearings and couplings, reducing the manual effort involved. SKF manufactures a comprehensive range of hydraulic pumps and oil injectors to suit all sizes of components.