smallest hydraulic pump factory

In this mini power pack, our well-proven radial piston pump from automotive engineering is integrated directly into the bell housing. As oil tank the unit has a round transparent tank with a M8x1 filler plug.

The type HR080 micro hydraulic power pack features high pressure in the smallest space, with the option to use any installation position. The reversing function is performed by reversing the direction of rotation of the motor. A directional valve is not needed. The motor is protected from overload by an integrated temperature switch. This hydraulic power pack is equipped with a DC or AC motor.

The type HR120 mini hydraulic power pack features high pressure in the smallest space, with the option to use any installation position. The reversing function is activated by reversing the motor’s direction of rotation. No directional valve is required. The motor is protected from overloads by a built-in temperature switch.

The mini hydraulic power unit type A is characterized by its modular design. In the power pack, an external gear pump is flanged to the equipment carrier and the oil reservoir is designed as a round plastic tank with an M 14x1.5 filler plug. The power unit is mainly used in automotive engineering, aviation, floor-lock systems as well as in decentralized hydraulic control systems.

Directional seated valves have zero leakage. Depending on the valve type, actuation is electromagnetic, pressure-actuated, mechanical or manual. The range includes seated valves and valve combinations. Directional spool valves are also a type of directional valve. They control the direction of movement and the velocity of single and double-acting hydraulic consumers. The range includes on/off directional spool valves, proportional directional spool valves and valve combinations.

The SLC1 chained valves are a combined design consisting of seated valves and dual check valves. They can be used to hold hydraulic actuators in position for long periods of time. Restrictor check valves are mounted on the cylinders for speed adjustment.

The TLC3 series connection add-on valve is a combined design consisting of a slide valve and a dual check valve. It can be used to hold hydraulic actuators in position for long periods of time. The built-in T-throttles also allow the user to pre-set the speed of the actuators.

The modular and compact construction with single and multiple pump versions permits a wide range of applications. In multiple pump systems up to 5 metering units can ...

The radial piston pump type R consists of valve-controlled pump elements arranged in star form around an eccentric. For large flow rates, up to 42 pump elements can be set up in 6 stars ...

The radial piston pump type R consists of valve-controlled pump elements arranged in star form around an eccentric. For large flow rates, up to 42 pump elements can be set up in 6 stars ...

The K3VG series are swash-plate type axial piston pumps which give excellent performance in high flow industrial applications in a compact and cost-effective package.

... Piston Pumps provide fixed-displacement power in a unique miniature design. Engineered for open-circuit systems, they bring flexibility to your operation. Compact Piston Pumps ...

... Series pump offers variable displacement axial piston pumps for open-circuit applications. Featuring a compact footprint and continuous operating pressure of up to 4,060 psi, PD piston ...

... and very compact for easier and inexpensive installations. Bent Axis pumps-motors will mount directly to virtually any Bezares PTO in our extensive line.

... displacement bent axis piston pumps were developed with spherical head pistons. This provides extremely high performance and high pressure ratings on a long life span unit. Flow rates range from 10.5 to 29 GPM. These ...

Sophisticated technology in the smallest space - this is what our Alfra electro-hydraulic pumps stand for. Due to the compact design, the powerful drive units also find room when things ...

strong, compact, robust - the Alfra electric hydraulic pumps in the white clean-look are much more than easy on the eye. The powerful drive units are the perfect partner ...

... alkitronic hydraulic pumps with electric or pneumatic drive provide fast operating speed, reliability, and safety. They are designed for permanent operation. Our hydraulic ...

The 10 series Power Team hydraulic pumps are designed to have a maximum of 690 bar (10,000 psi) at a flow rate of 164 cc/min (10 cu. in/min). All Power Team pumps come fully assembled, ...

Compact, lightweight and portable the Power Team PA6D series pumps are single-speed pumps for driving double-acting cylinders. The PA6D series pumps operate at 40-100 ...

The EPA series hand pumps are compact and easy to carry around the job site. To get the job done faster, these powerful dual speed pumps offer some of the best flow rates in the industry. ...

Like all the pumps of the HP Series, it is suitable for any hydraulic application which require very high hydraulic output pressures and a moderate and controllable oil flow, to ensure ...

The HP-AP pump, like all HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series air-hydraulic ...

The HP-RC pump, like all the HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series ...

P802 pneumohydraulic pump is designed with the integration of a three-way directional control valve, which functions through supplying single-acting cylinders tanks. It is engineered with a robust and handy construction. ...

Small hydraulic motors are mechanisms that convert hydraulic energy into mechanical energy that can be used to power various machines. Small hydraulic motors have small stroke lengths, which is the distance that the piston moves inside the cylinder to achieve its extended state.

When the hydraulic fluid is pumped into the bottom chamber of a small hydraulic cylinder, the piston rod is pushed up, pushing the hydraulic fluid in the other chamber back into the reservoir. This process pressurizes the chamber and extends the piston to its full length, giving the hydraulic cylinder its ability to push. The piston’s full measurement, or stroke length, in small hydraulic motors, maybe less than an inch. Although they retain all of the capabilities of larger hydraulic cylinders, small hydraulic motors are typically used in applications requiring high precision, as in military operations or robotics. Regardless of the size of a hydraulic motor, certain considerations must always be thought through while building and before using one. Proper fluids must always be used and checked for compatibility with the metal material of the motor. All of the relief valves, pumps, and fluid reservoirs should be checked. Such precautions ensure that a hydraulic motor will function at its optimum level for the longest time.

Like most other hydraulic motors, these motors utilize pressurized fluid to generate torque and rotational motion. The pressurized fluid, usually oil, is stored in a reservoir until the motor is needed. When the motor is operating, the oil is released from the reservoir and flows into the motor itself. Hydraulic motors can come in many configurations, like gear, vane, radial piston, gerotor, and axial plunger motor configurations.

When the pressurized fluid enters the motor, it presses against the internal components of the motor (the gears, pistons, cylinders, etc.), which move or turn to rotate a shaft. Thus, the hydraulic motor converts the hydraulic energy of the fluid into mechanical energy in the form of rotational motion and torque. Once the fluid exits the motor, it is recycled and pressurized in the reservoir.

Although they retain all of the capabilities of larger hydraulic motors, small hydraulic motors are typically used in applications requiring high precision, such as in military operations or robotics. Regardless of the size of a hydraulic motor, there are certain considerations that must always be thought through while building and before using one.

Proper fluids must always be used and checked for compatibility with the metal material of the motor. All of the relief valves should be checked as well as the pump and fluid reservoirs. Such precautions will ensure that a hydraulic motor will function at its optimum level for the longest period of time.

This mini power pack dimensions are very small and compact, so, we also call them small hydraulic power packs or small hydraulic power units. They offer high pressure with low flow for single action hydraulic systems or double acting small hydraulic cylinders.

Target Hydraulics provides small hydraulic power pack DC motors from 350 watts to 800 watts, and AC motors from 0.25Kw to 0.75Kw for 4 poles. All of the power packs are suited for house designs and manufacturer aluminum manifold blocks. Our aluminum manifold port threads are normally 1/4”BSPP or 3/8”BSPP.

Target Hydraulics designs and manufactures mini hydraulic power-packs. Our hydraulic power pack manufacturer is located in Ningbo, China. We produce high performance hydraulic power packs in China, and this enables Target Hydraulics to be competitive in the world market with reasonable prices.

Our Engineers design mini hydraulic power packs with  3D and 2D software for different applications. mini AC and DC power packs are our main products. Single and double acting power packs are popular ones.

Target Hydraulics small power pack hydraulic units are designed for different hydraulic system applications. Such as Construction Machinery/Agricultural Machinery/Wind Power/Mining etc

Target Hydraulics offers you a wide range of hydraulic products. small and mini power packs including single acting mini hydraulic pump 12v, hydraulic cylinder power packs, and AC or DC micro hydraulic power unit.

98569 small hydraulic pump products are offered for sale by suppliers on Alibaba.comAbout 1% % of these are pumps, 1%% are hydraulic pumps, and 1%% are other hydraulic parts.

A wide variety of small hydraulic pump options are available to you, such as electric, hydraulic.You can also choose from high pressure, low pressure small hydraulic pump,as well as from 1 year, 6 months, and 1.5 years small hydraulic pump, and whether small hydraulic pump is indonesia, spain, or united states.

If you are supplying pump supplies, you can find the most favorable prices at Alibaba.com. Whether you will be working with piston type or diaphragm type systems, reciprocating or centrifugal, Alibaba.com has everything you need. You can also shop for different sizes mini hydraulic pump wholesale for your metering applications. If you operate a construction site, then you could need to find some concrete pump solutions that you can find at affordable rates at Alibaba.com. Visit the platform and browse through the collection of submersible and inline pump system, among other replaceable models.

A mini hydraulic pump comes in different makes and sizes, and you buy the tool depending on the application. The pump used by a filling station is not the one you use to fill up your tanks. There are high flow rate low pressure systems used to transfer fluids axially. On the other hand, you can go with radial ones dealing with a low flow rate and high-pressure fluid. The mixed flow pump variety combines radial and axial transfer mechanisms and works with medium flow and pressure fluids. Depending on what it will be pumping, you can then choose the mini hydraulic pump of choice from the collection at Alibaba.com.

Alibaba.com has been an excellent wholesale supplier of mini hydraulic pump for years. The supply consists of a vast number of brands to choose from, comes in different sizes, operations, and power sources. You can get a pump for residential and large commercial applications from the collection. Whether you want a water pump for your home, or run a repair and maintenance business, and need a supply of miniraulicraulic,, you can find the product you want from the vast collection at Alibaba.com Whether it is for refrigeration, air conditioning, transfer, or a simple car wash business, anything you want, itib Al.aba hascom. it can with all help and find the right one for your..therther is wanting a water supply for your business, or you"re looking for a vast supply of bulk tools to it, you"ll find everything you need at affordable prices.

Features a hybrid drive system that combines the benefits of hydraulics with the controllability of an AC servo motor and inverter motor to satisfy a broad range of specifications with a small volume pump. Users will find energy savings in fields such as industrial machinery and machine tools.

Total weight 3.3kg. The weight of the device on ankle part where the exercise load is big is reduced to 0.97kg by wearing the power supply on the waist. 65Nm torque is generated by Takako"s standard 0.4cc pump.

Hydraulic systems are in general members of the fluid power branch of power transmission. Hydraulic pumps are also members of the hydraulic power pack/hydraulic power unit family. Hydraulic units are encased mechanical systems that use liquids for hydraulics.

The hydraulic systems that hydraulic pumps support exist in a range of industries, among them agriculture, automotive manufacturing, defense contracting, excavation, and industrial manufacturing. Within these industries, machines and applications that rely on hydraulic pumps include airplane flaps, elevators, cranes, automotive lifts, shock absorbers, automotive brakes, garage jacks, off-highway equipment, log splitters, offshore equipment, hydraulic motors/hydraulic pump motors, and a wide range of other hydraulic equipment.

When designing hydraulic pumps, manufacturers have many options from which to choose in terms of material composition. Most commonly, they make the body of the pump–the gears, pistons, and hydraulic cylinders–from a durable metal material. This metal is one that that can hold up against the erosive and potentially corrosive properties of hydraulic fluids, as well as the wear that comes along with continual pumping. Metals like this include, among others, steel, stainless steel, and aluminum.

First, what are operating specifications of their customer? They must make sure that the pump they design matches customer requirements in terms of capabilities. These capabilities include maximum fluid flow, minimum and maximum operating pressure, horsepower, and operating speeds. Also, based on application specifications, some suppliers may choose to include discharge sensors or another means of monitoring the wellbeing of their hydraulic system.

Next, what is the nature of the space in which the pump will work? Based on the answer to this question, manufacturers will design the pump with a specific weight, rod extension capability, diameter, length, and power source.

Manufacturers must also find out what type of substance does the customer plan on running through the pumps. If the application calls for it, manufacturers can recommend operators add other substances to them in order to decrease the corrosive nature of certain hydraulic fluids. Examples of such fluids include esters, butanol, pump oils, glycols, water, or corrosive inhibitors. These substances differ in operating temperature, flash point, and viscosity, so they must be chosen with care.

All hydraulic pumps are composed in the same basic way. First, they have a reservoir, which is the section of the pump that houses stationary fluid. Next, they use hydraulic hoses or tubes to transfer this fluid into the hydraulic cylinder, which is the main body of the hydraulic system. Inside the cylinder, or cylinders, are two hydraulic valves and one or more pistons or gear systems. One valve is located at each end; they are called the intake check/inlet valve and the discharge check/outlet valve, respectively.

Hydraulic pumps operate under the principle of Pascal’s Law, which states the increase in pressure at one point of an enclosed liquid in equilibrium is equally transferred to all other points of said liquid.

To start, the check valve is closed, making it a normally closed (NC) valve. When the check is closed, fluid pressure builds. The piston forces the valves open and closes repeatedly at variable speeds, increasing pressure in the cylinder until it builds up enough to force the fluid through the discharge valve. In this way, the pump delivers sufficient force and energy to the attached equipment or machinery to move the target load.

When the fluid becomes pressurized enough, the piston withdraws long enough to allow the open check valve to create a vacuum that pulls in hydraulic fluid from the reservoir. From the reservoir, the pressurized fluid moves into the cylinder through the inlet. Inside the cylinder, the fluid picks up more force, which it carries over into the hydraulic system, where it is released through the outlet.

Piston pumps create positive displacement and build pressure using pistons. Piston pumps may be further divided into radial piston pumps and axial piston pumps.

Radial pumps are mostly used to power relatively small flows and very high-pressure applications. They use pistons arranged around a floating center shaft or ring, which can be moved by a control lever, causing eccentricity and the potential for both inward and outward movement.

Axial pumps, on the other hand, only allow linear motion. Despite this, they are very popular, being easier and less expensive to produce, as well as more compact in design.

Gear pumps, or hydraulic gear pumps, create pressure not with pistons but with the interlocking of gear teeth. When teeth are meshed together, fluid has to travel around the outside of the gears, where pressure builds.

External gear pumps facilitate flow by enlisting two identical gears that rotate against each other. As liquid flows in, it is trapped by the teeth and forced around them. It sits, stuck in the cavities between the teeth and the casing, until it is so pressurized by the meshing of the gears that it is forced to the outlet port.

Internal gear pumps, on the other hand, use bi-rotational gears. To begin the pressurizing process, gear pumps first pull in liquid via a suction port between the teeth of the exterior gear, called the rotor, and the teeth of the interior gear, called the idler. From here, liquid travels between the teeth, where they are divided within them. The teeth continue to rotate and mesh, both creating locked pockets of liquid and forming a seal between the suction port and the discharge port. Liquid is discharged and power is transported once the pump head is flooded. Internal gears are quite versatile, usable with a wide variety of fluids, not only including fuel oils and solvents, but also thick liquids like chocolate, asphalt, and adhesives.

Various other types of hydraulic pumps include rotary vane pumps, centrifugal pumps, electric hydraulic pumps, hydraulic clutch pumps, hydraulic plunger pumps, hydraulic water pumps, hydraulic ram pumps, portable 12V hydraulic pumps, hydraulic hand pumps, and air hydraulic pumps.

Rotary vane pumps are fairly high efficiency pumps, though they are not considered high pressure pumps. Vane pumps, which are a type of positive-displacement pump, apply constant but adjustable pressure.

Centrifugal pumps use hydrodynamic energy to move fluids. They feature a rotating axis, an impeller, and a casing or diffuser. Most often, operators use them for applications such as petroleum pumping, sewage, petrochemical pumping, and water turbine functioning.

Electric hydraulic pumps are hydraulic pumps powered by an electric motor. Usually, the hydraulic pump and motor work by turning mechanisms like impellers in order to create pressure differentials, which in turn generate fluid movement. Nearly any type of hydraulic pump can be run with electricity. Most often, operators use them with industrial machinery.

Hydraulic clutch pumps help users engage and disengage vehicle clutch systems. They do so by applying the right pressure for coupling or decoupling shafts in the clutch system. Coupled shafts allow drivers to accelerate, while decoupled shafts allow drivers to decelerate or shift gears.

Hydraulic ram pumps are a type of hydraulic pump designed to harness hydropower, or the power of water, to elevate it. Featuring only two moving hydraulic parts, hydraulic ram pumps require only the momentum of water to work. Operators use hydraulic ram pumps to move water in industries like manufacturing, waste management and sewage, engineering, plumbing, and agriculture. While hydraulic ram pumps return only about 10% of the water they receive, they are widely used in developing countries because they do not require fuel or electricity.

Hydraulic water pumps are any hydraulic pumps used to transfer water. Usually, hydraulic water pumps only require a little bit of energy in the beginning, as the movement and weight of water generate a large amount of usable pressure.

Air hydraulic pumps are hydraulic pumps powered by air compressors. In essence, these energy efficient pumps work by converting air pressure into hydraulic pressure.

Hydraulic pumps are useful for many reasons. First, they are simple. Simple machines are always an advantage because they are less likely to break and easier to repair if they do. Second, because fluid is easy to compress and so quick to create pressure force, hydraulic pumps are very efficient. Next, hydraulic pumps are compact, which means they are easy to fit into small and oddly shaped spaces. This is especially true in comparison to mechanical pumps and electrical pumps, which manufacturers cannot design so compactly. Speaking of design, another asset of hydraulic pumps is their customizability. Manufacturers can modify them easily. Likewise, hydraulic pumps are very versatile, not only because they are customizable, but also because they can work in places where other types of pump systems can’t, such as in the ocean. Furthermore, hydraulic pumps can produce far more power than similarly sized electrical pumps. Finally, these very durable hydraulic components are much less likely to explode than some other types of components.

To make sure that your hydraulic pumps stay useful for a long time, you need to treat them with care. Care includes checking them on a regular basis for problems like insufficient fluid pressure, leaks, and wear and tear. You can use diagnostic technology like discharge sensors to help you with detect failures and measure discharge pressure. Checking vibration signals alone is often not enough.

To keep yourself and your workers safe, you need to always take the proper precautions when operating or performing maintenance and repairs on your hydraulic pumps. For example, you should never make direct contact with hydraulic fluid. For one, the fluid made be corrosive and dangerous to your skin. For two, even if the pump isn’t active at that moment, the fluid can still be pressurized and may potentially harm you if something goes wrong. For more tips on hydraulic pump care and operation, talk to both your supplier and OSHA (Occupational Safety and Health Administration).

Pumps that meet operating standards are the foundation of safe and effective operations, no matter the application. Find out what operating standards your hydraulic pumps should meet by talking to your industry leaders.

The highest quality hydraulic pumps come from the highest quality hydraulic pump manufacturers. Finding the highest quality hydraulic pump manufacturers can be hard, which is why we have we listed out some of our favorites on this page. All of those whom we have listed come highly recommended with years of experience. Find their information nestled in between these information paragraphs.

Once you have put together you list, get to browsing. Pick out three or four hydraulic pump supply companies to which you’d like to speak, then reach out to each of them. After you’ve spoken with representatives from each company, decide which one will best serve you, and get started on your project.

Fluid power systems are noted for their high power density — permitting high force and torque output from relatively small components when compared to electromechanical systems. Microhydraulics makes it feasible to obtain a significant amount of force from a minimal power source within a very restricted space envelope. Thus, it can provide a straightforward solution to problems that are often beyond the limits of traditional mechanical options.

For example, they note that in a cylinder, force is proportional to area (L2) while weight is proportional to volume (L3). On the other hand, the thickness and weight of a cylinder wall required to contain a fixed pressure goes down with bore size. Thus, the final weight of a hydraulic system at small scale cannot be determined by proportionally scaling a large system.

Also, the fundamentals associated with pressure-driven flow dictates that high pressures are required to permit high flow rates through micro-sized channels. In laminar-flow conditions, an order-of-magnitude decrease in the hydraulic diameter of a channel increases by two orders of magnitude the pressure difference required to maintain a constant average flow velocity.

Another critical barrier for increased hydraulic power density at reasonable efficiency is the seals. Surface effects such as friction drag of seals and viscous drag of gaps become significant in small bores and that impacts overall efficiency. Too tight and friction dominates; too loose and the pressurized fluid will leak past the seal. Cost and power consumption are also important considerations. Fortunately, a number of manufacturers have designed or re-engineered hydraulic components to work on a “miniature” scale.

As one example, Bieri Hydraulik, a unit of Hydac International based in Liebefeld, Switzerland, makes six standard versions of Type AKP micro-axial piston pumps designed with three or five pistons. For instance, the 5-piston Size AKP36 pump measures only 1.4 in. (36 mm) in diameter by 3.9 in. (99 mm) long. It features a displacement of 0.36 cm3/rev with 250 bar maximum pressure and 4,000 rpm max speed.

The quiet-running units reportedly offer high volumetric efficiency even at minimum speed of 100 rpm. They are valve controlled on pressure and suction side, so are not suitable as motors. The small units are used in offshore and oil and gas applications, in metering systems, and general hydraulics systems with small displacements.

Hydro Leduc, Azerailles, France offers a complete range of fixed and variable displacement micro-pumps; micro-motors (speeds from 350 to 6,500 rpm); check, pressure-relief, solenoid and pilot valves; and complete micro-power packs for operating in widely varied working environments.

For example, its PB32 fixed displacement micro-pump has a body diameter of only 1.28 in. (32 mm) with displacement as small as 0.0007 in.3, maximum speed of 5,000 rpm continuous and 6,000 peak, and maximum pressure of 4,350 psi continuous and 5,075 psi peak. A slightly larger PB33 HP version has a 0.0027 in.3 displacement and a maximum continuous pressure rating of 13,050 psi and max peak of 14,500 psi (1,000 bar).

The Lee Company., Westbrook, Conn., makes an array of miniature, high-performance fluid control components, including Lee Plug® expansion plugs, solenoid valves, flow restrictors, safety screens, relief and check valves, and shuttle valves. The company’s flow controls, to cite one typical product, offer metered flow in one direction and free flow in the opposite direction. It’s also called a one-way restrictor. In the smallest size, diameter is only 0.18 in., yet nominal system pressure rating is up to 3,000 psi. Other similar-size products include poppet-style check valves that can flow one GPM at 25 psid and have a nominal system pressure rating up to 4,000 psi; and pressure relief valves that have cracking pressures from 20 to 100 psid and, in some versions handle nominal system pressures up to 5,000 psi. Some miniature check valve and restrictor models can even handle system pressures up to 8,000 psi.

Likewise, safety screens as small as 0.13 in. diameter help protect orifices, relief valves, and other sensitive hydraulic components. Critical components are often relatively immune to low levels of small-size contaminants, but a single large particle can cause sudden failure — possibly with catastrophic effects. While filters maintain fluid cleanliness during operation, safety screens provide an added level of protection. The units come with hole sizes from 0.0008 in. to 0.062 in., and high-pressure versions won’t burst or collapse at pressures of 7,500 psid, even if fully clogged.

Takako Industries, a member of the KYB Group based in Kyoto, Japan, claims to make the world’s smallest axial-piston pump. The square shape TFH-040 unit measures only 1.18 in. (30 mm) wide by 3.0 in. (77 mm) long and is rated for a maximum working pressure of about 2,030 psi (140 bar). Displacement is 0.4 cc/rev, input speed is to 2,000 rpm, with a flow rate of 0.8 lpm.

The unit is part of a family of micro-pumps which feature a hybrid drive system that combines the benefits of hydraulics with the controllability of an ac-servomotor and inverter to satisfy a broad range of specifications with a small-volume pump. Typical applications, according to the company, include a pump for valve controls, mold switching equipment for forming machines, hydraulic clamps, and crimping presses.

The world"s smallest and most powerful piston pump - that"s how manufacturers Sunfab Hydraulics describe their new dual flow pump, SC 75/75. They claim it"s the first of its capacity which can be directly mounted on a power take off generating twin flows from a single pump. Displacing 75 cm3 per rev through each circuit, yet with a width of only 123 mm, the company feels this pump will meet market demand for high performance and small size.

‘Up to now, it"s been a problem in truck hydraulics to generate two separate flows practically and at reasonable cost", explained Mats Sundin, Development Manager of Sunfab Hydraulics of Hudiksvall, Sweden. ‘Two separate pumps are expensive and take up too much room. But with our new SC 75/75 we"ve been successful in designing a compact, high-capacity dual flow pump that meets market demand".

The pump can generate two independent flows at a maximum working pressure of 350 bar. At 1,000 rev/min, both flow-rates are 75 l/min, and at the maximum speed of 1,600 rev/min flow-rate increases to 120 l/min. The ISO standard power take off flange, in combination with the small external size, allows direct mounting on most types of power take offs on the market.

Sunfab Hydraulics is a company which develops and manufactures hydraulic piston pumps. It was founded in 1925 in Arbrå, Sweden, under the name of AB Sundins Fabriker, and was originally involved in ski manufacture. Pumps for trucks became part of the product programme in the mid-fifties. Ski production was phased out in 1989 and the company is now totally committed to hydraulic pumps for use mainly in the heavy commercial vehicle sector. The company has ISO 9001 certification./ins

SC 75/75 is a new, compact, dual flow high-performance pump. It has been developed to fit the dual flow system to trucks or similar applications. The design is claimed to ensure a robust system with maximum durability and reliability.

Here at Huina Construction Toys, we retail and supply customers all over the world with Huina electric & hydraulic RC models, spare parts and upgrades. Before any purchase from us, customers are required to read all the information provided on this page.

These are RC Construction models which are made for people who are new to the RC construction hobby. These models are stepping stones before a customer consider getting themselves a hydraulic Model. Huina Construction toys hold stocks of these models in Fulfilment centres located in the USA, Canada, Australia and Spain. Fullfillment centres are professional warehouses and a third-party service provider that processes and ships products to customers who purchase. Fulfillment centers handle the logistics required to get an order to a customer"s doorstep, eliminating the need for us to package, address, and ship each order ourself. When a customer purchase from us, we ship from the nearest warehouse to the customer. eg when one live in the Texas and order from us we will ship from the California warehouse and deliver to him. We currently hold large stock of these models in the Canadian warehouse and customers located in the USA might receive packages from Canada. We provide Free express shipping for the Electric RC Models worldwide except for customers located in the UK. Peurto Rico, Alaska and New Zealand. Shipping to the UK is currently a problem because of The UK leaving Brexit, our only solution now is to ship from the main Chinese warehouse and that is why shipment require extra charges. This also applies to New Zealand. Puerto Rico, Alaska and other few states are considered outside territories from the USA and the fulfilment centres requires an additional $100 for shipment.

The Hydraulic RC models produced by Huina factory are called Kabolite. These are advanced RC Construction model which do require hydraulic oil for it to operate. Kabolite RC are more stronger than the Huina RC. It is made and recommended for advanced RC hobbyist (Customers who have a lot of experience in handling, repairing and maintaining RC toys especially the construction models). We usually hold stocks for the Kabolite 336GC Excavator and Kabolite 966 Wheel loader in all the warehouses. Models like the Kabolite 350 and 970 Excavator are not already made. Customers will have to wait after purchase for manufacturing before they are shipped out. All Kabolite models are shipped with express couriers and customers do not have to pay for shipping.

Not all hydraulic systems are large volume. If you have a very small actuator, pilot to pressurise, braking system or are simply calibrating and testing, the MC unit offers a flexible, high quality manual power solution with an amazingly small space envelope. Use one MC miniature and cost-effective pump close to the actuator and eliminate bulky hoses or pipework. Design a testing or calibration rig that takes up the same bench space as an office stapler. Designers use it where they can see the opportunity to fit a compact hydraulic cylinder in place of a laborious screw jack. The unit was developed for a hydraulic crew seat in conjunction with an innovative Micropac pull cylinder and connected with a small bore Polyflex hose. Lots of applications since have benefitted from this Micropac miniature hydraulic hand pump. We have integrated three and four-way port valves for applications including actuation, control systems and ground support equipment. A stainless-steel version with a 316-stainless body, piston rod and ancillary parts provides corrosion resistance in harsh environments. The 20cc reservoir is cleverly integrated into the body and if you can design your system around this, you will achieve a truly miniature 400 bar hydraulic system for use on mineral oil. If you require a larger volume, we offer a 175cc reservoir.

The MC series is a miniature 0.6cc per stroke, single acting hand pump for mineral oil. The hard-chromed piston rod runs in a bronze bearing for long life. The ultra-compact pump body is fitted with inlet and outlet non-return valves, a relief valve and a release valve. These two valves can be blanked with Micropac cavity blanking plugs for flexibility to suit your exact application. There is a 20cc reservoir integrated into the pump body with a G1/2 filler/breather and strainer mesh. If you need a larger reservoir, a 175cc tubular reservoir is offered and is fitted directly to the G1/2 filler port.  The pump is mounted using two M8 tapped holes in the body or using an angle bracket that we can supply. There is no provision for through holes in this compact pump body. The base model is carbon steel but a unit with a 316 stainless body and other parts is available. The outlet port is 1/8npt female, however we do offer adaptors if required. Contact us to discuss the best possible arrangement for your Micropac MC miniature hand pump. The unit should be piped up using tube (typically 6 or 6.35mm o/d) or a small-bore hose, typically -2 or -3 sizes. Whether you specify the base unit with the integral 20cc reservoir or fit the optional 175cc reservoir, this is still a remarkably compact 400 bar hand pump.

White House Products Ltd. has a reputation for providing access to the top brands of hydraulic components, not just in the U.K. but to our customers around the world. To this end, we have established ourselves as a leading supplier of hydraulic products and exceptional customer service, including:Specialising in new and replacement hydraulic pumps.

Parker Hannifin has become well-known as a leader in the hydraulic components industry. We are proud to supply a wide range of Parker gear pumps, piston pumps and motors and other hydraulic parts to meet the needs of different industries.

Hydreco Hydraulics is now part of the Italian Duplomatic Motions Solutions group. The modern Hydreco company was established in 1914 under the name Hamworthy Hydraulics, known in the US for a period as Hydreco Hamworthy owned by Powell Duffryn who sold their entire hydraulic fluid power division to the David Brown Gears company which renamed it David Brown Hydraulics. Following a number of sales and acquisitions it eventually became Hydreco.

Originally known as Kayaba, the KYB Corporation is trusted by manufacturers for many types of industrial hydraulic products. KYB services industries such as agricultural, material handling, and construction.

KYB manufactures gear pumps & motors, hydraulic piston pumps & motors, control valves, mixer truck components, hydraulic cylinders and radial piston low-speed, high-torque motors. Explore our online catalogue to find the KYB pump or motor that you need.

Adan hydraulic products are manufactured by Adan Ltd, which was founded in 1968. The U.K.-based company is a privately owned manufacturer of high torque hydraulic orbital motor products and gearboxes.

Shimadzu originated as a leading optical, medical, and laboratory instrument manufacturer. In 1994, the company expanded into the hydraulic equipment industry. Today, Shimadzu is considered to be one of the most reliable gear pump manufacturers.

While the company offers a range of advanced hydraulic products and technologies, their most popular product line is their range of hydraulic gear pumps designed for industries like:

White House Products Ltd. carries a very wide range of Shimadzu hydraulic pumps and seal kits. So, it is easy to find the new and replacement Shimadzu hydraulic components you need.

Turolla was founded in 1948 in Italy by Marco Turolla. Over the years, the company has grown into one of the top global manufacturers of fan drives and hydraulic gear products. In 2013, Turolla became a member of the Danfoss Group and now has manufacturing facilities in Europe and North America.

We supply Turolla hydraulic gear motors, fan control valves, and gear pumps, along with our exclusive line of seal kits and parts for all types of Turolla hydraulic pumps and components. We are also authorized to custom build the Turolla SNP2 Group 2 range of aluminium gear pumps and the D series cast iron gear pumps and motors offering an almost infinite variety of displacement configurations and port configurations.

White hydraulic motors have been around since the mid-1960s and were manufactured by White Drive Products. They soon became a top brand in the hydraulics industry, thanks to their unique hydraulic engineering capabilities, which allowed them to focus on creating efficient and reliable custom solutions and diverse product lines.

In 2016, White Drive Products merged and became a part of the Danfoss Group. The new merger has allowed for increased market growth and expansion of White hydraulic motors around the globe. Furthermore, White hydraulic motors continue to offer high-efficiency valving, high bearing load capacities, flexible designs, and long motor life. Following the acquisition of Eaton Hydraulics by Danfoss most of the White Drive business has been divested to the Interpump group.

Founded in 1952 by Roberto Casappa in Italy, Casappa has become a top supplier of hydraulic pumps and parts around the world. The company is known for its leading-edge technologies and advancements in the hydraulic industry.

For example, Casappa introduced the electronic pressure control in 2010 for its MVP piston pump product line. Today, the company continues to innovate and is considered a leading designer and builder of primary hydraulic components for various applications and industries.

Bosch Rexroth works in developing safe solutions tailored for specific applications and industries. The company has also placed a priority on reducing its carbon footprint while improving energy efficiency in its hydraulic product lines, including their small hydraulic motors and pumps.

While Bosch Rexroth’s hydraulic motors, gear pumps, and piston pumps may be more compact than many of their competitors. The Bosch Rexroth range of products is very comprehensive covering both industrial and mobile applications large and small.

In the early 1990s, its automotive division became its own company. Between its hydraulic components product lines and automotive division, the company was viewed as a leader in the electric, combustion, and hybrid vehicle markets.

Eventually, the hydraulic division was sold to Rexroth and became Rexroth USA. At that time, Borg Warner gear pumps were made obsolete. While Borg Warner offers a wide range of hydraulic control modules, electric motors, integrated clutching mechanisms, and other product lines, many of the Borg Warner gear pumps are no longer available.

As the original Borg Warner range of hydraulic pumps and components have been largely discontinued, we provide Borg Warner gear pump replacement options, such as custom building replacements at our factory in Port Glasgow to match the originals.

Bucher Hydraulics is considered a world leader in providing innovative solutions for industrial and mobile hydraulic applications using the latest hydraulic control and drive technologies. The company manufactures a wide range of hydraulic product lines, including:

We make it easy to find the Bucher Hydraulics parts and components you require. Do not hesitate to contact us directly if you need help finding specific Bucher Hydraulic parts and components.

Whilst we have covered eleven of the top hydraulic brands stocked by White House Products Ltd., it by no means includes all the top brands we carry. Feel free to explore our online catalogue further to discover more top hydraulic brands featuring hydraulic parts and components, pumps, motors, hydraulic hose fittings, and more.