split flow hydraulic pump price

ONE Dynex pump can supply multiple actuators, and synchronized movement can be achieved without flow dividers. Dynex pioneered this Split-Flow® technology over 60 years ago!

The checkball pump design uses individual piston check valves, offering a unique advantage among hydraulic pumps. Each pumping chamber can be isolated, and the output from each piston can be used separately.

​The HSP series electric driven split flow hydraulic pump range offers users the opportunity to operate up to 8 independent hydraulic outlets from within a single pump assembly. With easy to operate controls HSP series pumps are ideally suited for synchronous lift applications particularly where there is uneven load distribution between the multiple jacking points. All models are 380/440 volt three phase electrical supply operation. Optional extra’s include a fully automatic PLC controlled synchronised lifting system, with a variety of user settings, such as target lifting height, maximum tolerance between the jacking points and other key settings, all controlled from a centralised touch screen computer.

HSP series pumps fitted with low voltage solenoid valves are complete with a low voltage control system, which allows the user to individually or simultaneously control each valve and the movement of the lifting cylinder pistons. Once the load is correctly supported, by the selected cylinder pistons, the synchronised lift operation can commence. The operation of the HSP Pump Unit can be entirely controlled from the remote control panel, which features individual valve on / off switches and a set of cylinder piston lift and lower buttons that can be individually selected for inclusion in the lift operation.

The checkball pump design, with its individual piston check valves, offers a unique advantage among hydraulic pump designs. With our design each pumping chamber can be isolated, and the output from each piston can be used separately! This means ONE Dynex pump can supply multiple functions and synchronized movement without flow dividers. We call this Split-Flow® technology and we patented the design a long time ago.

Enerpac® Electric Hydraulic Pump, Split Flow, 9240 cu-in Reservoir, 10 hp, 203 cu-in/min, 10000 psi, 460 V, 60 Hz, 44-1/2 in Overall Length, 23.8 in Overall Width, 54 in Overall Height

CharacteristicsPower sourceelectric motorApplicationslifting, for construction sites, high-pressure, for marine applications, oil pumpOther characteristicsstationary, high-powerOperating pressureMin.: 0 bar (0 psi)

Even when the load varies, the single-speed, axial piston pumps, equal flow rate and the two, four or six independent outlets remain constant, which is one of the most important advantages of this item. Synchronous load control is possible during the up phase, while each of the outlets can be equipped with a flow control valve, controlling the load during the down phase. If a control is required on the up and down phase, a PLC can be used to control the FPT synchronous system.

The HSP split flow, hydraulic pump is designed to deliver equal volumes of oil from each individual control valve regardless of any variations in the hydraulic pressure.

Each valve outlet is connected directly to an independent internal piston pump which is driven by a common electric motive force. This allows each internal piston pump to deliver an equal amount of oil flow per minute regardless of any variations in the required operating pressure at each control valve outlet.

With HSP split flow pumps lifting and positioning large, unevenly weighted loads using multiple jacking points in a synchronized, level lift and controlled manner is easily achievable. Individual control of each valve is via a specially made electric control box with easily identifiable on/off switches for each applicable valve plus a synchronized lift control button for all of the selected control valves. There is a remote hand pendant control system which is wired to the pump mounted control box.

Maximum working pressure of all HSP pumps is 700 Bar with an externally adjustable pressure relief valve for easy pressure adjustment between 70 and 700 Bar. Electric motors are 380/440 volt three phase operation.

Electric driven, split flow, hydraulic pumps designed to deliver equal volumes of oil from each individual control valve regardless of any variations in the hydraulic pressure.

The range offers a selection of outlet valve configurations ranging from a 2-outlet model with manually operated directional control valves, through to a 8-outlet model with electric solenoid operated valves. Each valve outlet is connected directly to an independent internal piston pump which is driven by a common electric motive force.

This technology allows each internal piston pump to deliver an equal amount of oil flow per minute regardless of any variations in the required operating pressure at each control valve outlet.

Maximum working pressure of all these pumps is 700 Bar with an externally adjustable pressure relief valve on each outlet for easy pressure adjustment between 70 and 700 Bar.

Since 1910 Enerpac has had decades of experience developing hydraulic systems and technology. Their products have moved some of the largest structures on earth. They are committed to achieving a Goal of Zero harm to their products" employees, customers, and end users.