stanley hp1 compact hydraulic pump made in china

HP1/HPR Compact Power Units Built to meet the tough HTMA standards. HTMA standards so they’ll provide sure Equipped with a high-speed blower and large air-to-oil cooler, our power units provide a source for clean and cool hydraulic power under the toughest operating conditions. All models feature either the powerful Briggs & Stratton Vanguard OHV V-Twin, or Honda OHV GX620 engine. These high-torque engines are fuel efficient, have lower exhaust emissions, yet run quieter than most engines their size. These power units are easy to service too – both the engine and the hydraulic spinon filters are a snap to change. A large readily available commercial battery is fully enclosed in a battery box. OPERATION AND PERFORMANCE HP1 COMPACT HPR ITEM U.S.A. METRIC U.S.A. METRIC Output (2) 5 gpm @ (2) 20 lpm @ 5 or 8 gpm 20 or 30 lpm 2000 psi circuits 140 bar circuit @ 2000 psi @ 140 bar (1) 10 gpm @ (1) 38 lpm @ 2000 psi circuit 140 bar circuit Length 35.5 in. 90.17 cm 35.5 in. 90.17 cm Width 23.25 in. 59.06 cm 23.25 in. 59.06 cm Height 29 in. 74 cm 29 in. 74 cm Weight (less fuel) 276 lbs 125 kg 286 lbs 130 kg Fuel Consumption 1.3 gph 4 lph 1.3 gph 4 lph Engine Lube System Pressure Lube/Low Pressure Lube/Low Engine Oil Shutoff Engine Oil Shutdown Running Gear 12 in. Wheels 31 cm Wheels 12 in. Wheels 31 cm Wheels Retractable Retractable Retractable Retractable Handles Handles Handles Handles Fuel Tank Capacity 4.2 gal. 16 ltr 4.2 gal. 16 ltr Hydraulic Reservoir Capacity 2.7 gal. 10 ltr 2.7 gal. 10 ltr Engine 18 hp Vanguard IC V-Twin (OHV) Stanley Features • Rugged Side Handles Run the entire length of the unit on both sides for easy lifting and protection. • Automatic Throttle Mechanism Provides automatic throttling when the tool is engaged, and return to idle when disengaged. • Sealed No-Maintenance Battery The 35-Ah battery is sealed, non-spillable and requires no maintenance. • Fiberglass Pack Muffler Quiet operation – only 85 db during normal operation. P/N 14530 3/02 • Low Oil Pressure Shutoff A standard feature to protect the engine from low lubrication conditions. • Swing Away Lifting Eye Makes lifting quick and easy using overhead lifting devices. 20 hp Honda (OHV) Equipped with a high-speed blower and large air-to-oil cooler, our power units Stanley"s compact power units feature the most efficient hydraulic circuits available in a portable power unit today.

The Stanley TP08 Heavy Duty Trash Pump is used for dewatering, dredging, cleaning and as a effective bilge pump. The gear motor is direct drive to the cast iron impeller with easy access for clean out of the fabricated steel volute.

The Stanley TP08 Heavy Duty Trash Pump has been designed to get the most from an HTMA Type II hydraulic circuit. Using only 9 gpm/34 lpm of hydraulic flow, the TP08 will pump over 800 gpm/3,028 lpm at a 10 ft/2.54 m head. The free-flow impeller and 4 in./ 100 mm inlet and outlet combine to make the TP08 one of the most efficient pumps in the business.

Weighing only 59 lbs/27 kg and with its convenient handle, the Stanley TP08 Heavy Duty Trash Pump can easily be handled by one operator. The Stanley TP08 Heavy Duty Trash Pump and the Stanley HP1 Compact Power Unit make a powerful, portable team for high volume de-watering and trash pump applications.

The heavy-duty construction of the Stanley TP08 Heavy Duty Trash Pump features a fabricated, all steel volute and abrasion resistant cast iron impeller. The volute uses replaceable UHMW polyethylene wear plates to reduce wear and extend pump life. The heavy-duty Stanley HYREVZ™ hydraulic motor is self-lubricating.

Routine maintenance for the Stanley TP08 Heavy Duty Trash Pump is easy. The top cover is attached to the volute with six wing nuts so cleaning and inspection can be accomplished in just a few minutes.

Note:In an effort to improve portability and ease of use, modifications have been made to all TP03 and TP08 model trash pumps. For both pumps a quick link clip (p/n 73577) and carrying handle (p/n 73576) were added and connected to the eyelet located on the top plate. The rounded handle allows for increased comfort while carrying when compared to the previous square handle. With the clip feature, the handle can be removed to allow for large crane hooks to attach to the eyelet. In addition, the color of the TP03 urethane bowl has been changed from black to yellow. This change was made to increase pump visibility while operating in murkier substances or liquids.

The HP8 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The HP8 features an intuitive throttle selector which makes changing flow rates very easy. Its feature-rich, dependable operation make the HP8 the workhorse of the industry.

The HP12 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 2 and Type 3 hydraulic tools. Its powerful 23 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The HP12 features an intuitive throttle selector which makes changing flow rates very easy. Its feature-rich, dependable operation make the HP12 the industry choice for high-flow applications.

All Stanley Hydraulic Tools, parts, accessories and allied equipment are subject to design improvements, specification and price changes at any time without notice and with no

Proper material handling and storage practices are key to an efficient, safe, and cost-effective facility. Hanes Supply provides solutions for all aspects of material handling, storage and hydraulics from the most trusted brand names in the industry.

Special application hand trucks designed to move packages, barrels, cylinders and more. Our dual truck models convert in seconds from a hand truck to platform truck. Available options include narrow aisle trucks, heavy duty hand trucks, hydraulic pallet trucks and more.

Hydraulic solutions are pivotal to a faster, more efficient material handling process. Our hydraulic material handling products include automotive lifting tools, actuators, power units, hydraulic valves, and more. Featured brands include Enerpac® and SPX PowerTeam®.

Our jacks allow for safe lifting and lowering of loads. Offered in capacities of up to 150 tons, options include hydraulic jacks and remote operation capabilities. Designs for specific applications include hydraulic stackers, track jacks, and air motor jacks.

Proper material handling and storage practices are key to an efficient, safe, and cost-effective facility. Hanes Supply provides solutions for all aspects of material handling, storage and hydraulics from the most trusted brand names in the industry.

Special application hand trucks designed to move packages, barrels, cylinders and more. Our dual truck models convert in seconds from a hand truck to platform truck. Available options include narrow aisle trucks, heavy duty hand trucks, hydraulic pallet trucks and more.

Hydraulic solutions are pivotal to a faster, more efficient material handling process. Our hydraulic material handling products include automotive lifting tools, actuators, power units, hydraulic valves, and more. Featured brands include Enerpac® and SPX PowerTeam®.

Our jacks allow for safe lifting and lowering of loads. Offered in capacities of up to 150 tons, options include hydraulic jacks and remote operation capabilities. Designs for specific applications include hydraulic stackers, track jacks, and air motor jacks.