starter solenoid for hydraulic pump factory

This 4 terminal starter solenoid is commonly used by hydraulic dump trailer manufacturers (eg Load Trail, Parker Performance). It works on power up / power down dump trailers.

The items we have listed for pop up campers are the only items we have available. We are not able to special order any items at this time, and we are unable to provide technical assistance due to high order volume. Thank you for your understanding.

【High Quality】Intermittent Duty Solenoid is made of tough plastic and durable copper, Coil Roll is using 180℃ copper wire, which allows it to be used in the harshest environmental conditions, protects against dust and water jets, dust& liquid resistant, anti-rust and corrosion. 100% OEM Match and Replacement.

【OEM Parts Number】Solenoid Switch Replaces Part Number: Prestolite SAZ-4201GJ 7522 SAZ-4201ER Monarch/Bucher 07522 IRON BULL Dump Trailer Solenoid Also suitable for pj dump trailer with KTI system OEM Part# 190107;for Dump Pump Part# 070009 Dump Traile.

【Application】This 4 terminal solenoid is commonly used by hydraulic dump trailer manufacturers (eg Load Trail, Parker Performance). It works on power up / power down dump trailers.It can also replace the solenoid valve of the hydraulic leveling jack on the motorhome. Also common on many other brand dump trailers.

【replacement】 Dump trailer solenoid Genuine CASE, CAT, PRESTOLITE replacement part for small gasoline engines. This OEM part ensures proper fit and performance to maintain the life of your CASE, CAT, PRESTOLITE engine.

We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and watercraft owners have trusted the safety and longevity of their investments to HEWITT lifts, docks, and canopies.

HEWITT Machine and Manufacturing, Inc. warrants all HEWITT-built docks and accessories purchased new by original owner to be free from defects in the material and workmanship under normal use for a period of 24 months from the date of purchase (excluding components and options which carry their own manufacturer’s warranty, wherein that warranty will apply). Aluminum decking is separately warranted for a period of five years. Warranty is void when misuse or neglect is the cause. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA FOR PRODUCTS USED FOR FRESH WATER. CHECK ON REQUIREMENTS FOR USE IN SALTWATER.

No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to HEWITT products shall bind HEWITT Machine and Manufacturing, Inc. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT PRODUCTS AND ARE HEREBY DISCLAIMED.

In the event of a possible warranty claim, the defective products must be returned to HEWITT Machine and Manufacturing, Inc. If proven to be defective upon inspection, they will be exchanged for new or comparable rebuilt products, as determined by HEWITT Machine and Manufacturing, Inc. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective HEWITT products. HEWITT Machine and Manufacturing, Inc. must be notified in writing within one month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty.

The customer’s remedies with respect to defective HEWITT products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall HEWITT Machine and Manufacturing, Inc. be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the HEWITT product, regardless of the legal theory on which the claim is based, and even if HEWITT Machine and Manufacturing, Inc. has been advised of such damages. In no event shall recovery of any kind against HEWITT Machine and Manufacturing, Inc. be greater in amount than the purchase price of the HEWITT product sold by HEWITT Machine and Manufacturing, Inc. and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the HEWITT product. HEWITT Machine and Manufacturing, Inc. is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the HEWITT product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall HEWITT Machine and Manufacturing, Inc. be liable for incidental or consequential damages to the full extent such may be disclaimed by law.

Non HEWITT Machine and Manufacturing, Inc. manufactured products are sold “as is”, without warranty of any kind by HEWITT Machine and Manufacturing, Inc., including an implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non HEWITT Machine and Manufacturing, Inc. manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT Machine and Manufacturing, Inc.’s knowledge the following warranties are provided by other manufacturers: Flotation tanks carry a manufacturer’s 12 year warranty.

We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and watercraft owners have trusted the safety and longevity of their investments to Hewitt lifts, docks, and canopies.

HEWITT Machine and Manufacturing, Inc. further warrants all other parts used on HEWITT-built lifts and accessories, purchased new by original owner, to be free from defects in the material and workmanship under normal use for a period of 24 months from the date of purchase (excluding components and options which carry their own manufacturer’s warranty, wherein that warranty will apply.) Warranty is void when misuse or neglect is the cause. Specifications are subject to change without notice. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA FOR PRODUCTS USED FOR FRESH WATER. CHECK ON REQUIREMENTS FOR USE IN SALTWATER.

No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to HEWITT products shall bind HEWITT Machine and Manufacturing, Inc. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT PRODUCTS AND ARE HEREBY DISCLAIMED.

In the event of a possible warranty claim, the defective products must be returned to HEWITT Machine and Manufacturing, Inc. If proven to be defective upon inspection they will be exchanged for new or comparable rebuilt products, as determined by HEWITT Machine and Manufacturing, Inc. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective HEWITT products. HEWITT Machine and Manufacturing, Inc. must be notified in writing within one month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty.

The customer’s remedies with respect to defective HEWITT products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall HEWITT Machine and Manufacturing, Inc. be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the HEWITT product, regardless of the legal theory on which the claim is based, and even if HEWITT Machine and Manufacturing, Inc. has been advised of such damages. In no event shall recovery of any kind against HEWITT Machine and Manufacturing, Inc. be greater in amount than the purchase price of the HEWITT product sold by HEWITT Machine and Manufacturing, Inc. and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the HEWITT product. HEWITT Machine and Manufacturing, Inc. is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the HEWITT product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall HEWITT Machine and Manufacturing, Inc. be liable for incidental or consequential damages to the full extent such may be disclaimed by law.

Non HEWITT Machine and Manufacturing, Inc. manufactured products are sold “as is”, without warranty of any kind by HEWITT Machine and Manufacturing, Inc., including an implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non HEWITT Machine and Manufacturing, Inc. manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT Machine and Manufacturing, Inc.’s knowledge the following warranties are provided by other manufacturers: Hydraulic pumps and hoses carry a manufacturer’s 2-year warranty. Hydraulic cylinders carry a manufacturer’s 1-year warranty. BoatPort controller carries a manufacturer’s 1-year warranty.

Replacement Boatlift Covers canopies and accessories to be purchased new by original owner, to be free from defects in the material and workmanship under normal use for a period of 5 years from the date of purchase.

Replacement Boat Lift Covers canopies and accessories to be purchased new by original owner, to be free from defects in the material and workmanship under normal use for a period of 5 years from the date of purchase Warranty is void when misuse or neglect is the cause. Specifications are subject to change without notice. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA.

No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to Replacement Boat Lift Covers products shall bind Replacement Boat Lift Covers. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO REPLACEMENT BOAT LIFT COVERS PRODUCTS AND ARE HEREBY DISCLAIMED.

In the event of a possible warranty claim, the defective products must be returned to Replacement Boat Lift Covers . If proven to be defective upon inspection they will be exchanged for new or comparable rebuilt products, as determined by Replacement Boat Lift Covers. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective products. Replacement Boat Lift covers must be notified in writing within one month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty.

The customer’s remedies with respect to defective Replacement Boat Lift Cover products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall Replacement Boat Lift Covers be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the Replacement Boat Lift Covers product, regardless of the legal theory on which the claim is based, and even if Replacement Boat Lift Covers. has been advised of such damages. In no event shall recovery of any kind against Replacement Boat Lift Covers be greater in amount than the purchase price of the product sold by Replacement Boat Lift Covers and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, Replacement Boat Lift Covers is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall Replacement Boat Lift Covers be liable for incidental or consequential damages to the full extent such may be disclaimed by law.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

A starter solenoid is a critical part of your fleet vehicles’ systems, as without it, you wouldn’t be able to start your trucks. It takes a lot of power to start a vehicle, and a solenoid is needed to manage that power. Putting the wrong kind of solenoid in, however, could be disastrous.

A century ago, in order to start a car’s engine you had to crank it by hand. That system was quickly done away with for the sake of convenience, of course. In order to be effective, though, the starting mechanism has to be able to drive the engine fast enough for it to generate power on its own — a tall order, as it requires a lot of power.

Without the modern ignition system and the starter solenoid, thick cables would have to relay power from the battery to the ignition, and again from the ignition to the starter. The ignition system and the starter solenoid makes it possible to run one cable only, from the battery to the solenoid, with the solenoid effectively acting as a dam, not letting the power through until the ignition is turned.

When the ignition is turned to the start position, the starter solenoid closes the circuit, sending the power to the starter, which then turns the engine. Once the engine is running under its own power, the driver releases the key, returning the ignition to the “on” position. The solenoid then opens the circuit and cuts the power to the starter.

A continuous duty solenoid works much like a regular starter solenoid, opening and closing a circuit in order to turn the power flow off and on. As you might have guessed, however, in the case of a continuous duty solenoid the power flow is more of a constant, whereas a starter solenoid operates intermittently. The power traveling through a continuous duty solenoid is also much lower, because it has to run for long periods of time. Continuous duty solenoids generally don’t power any system nearly as hot as your vehicle’s starting system, so they also are made to withstand much lower levels than starter solenoids.