stinger air hydraulic pump factory

Ideal all-around power source develops 10,000 PSI at 100 PSI air. 2-stage release mechanism; internal relief valve. Pump, hold, or release load with pedal control.

If you are assembling a car lift, you will need hydraulic fluid to make the lift work. PLEASE NOTE: we do not supply the hydraulic fluid for your lift. In general we recommend AW-32 hyraulic fluid for use in all of our car lifts (regardless of the type). A 5 gallon pale is typically more than enough and will usually leave you with a little extra

When filling your hydraulic fluid for the first time don"t rush the process. Fill the resevior to 1/3 or 1/2 and then run the lift up and down. Get the air and kinks out and then, when the lift is in the lowest position, fill it to 2/3 or 3/4 and run the lift up and down again. DO NOT fill the resevoir past 1/3 or 1/2 when the lift is in the raised position as there is flud throughout the cyclinders and other components. We have heard many times that a customer has filled the resevoir full when the lift is in the raised position and the as soon as they begin lowering the lift the resevoir becomes overfilled and spills all over the shop. This is a huge mess to clean up.

Some hydraulic cylinders may be "air locked" from manufacturing which will not allow the piston to extend when pulled by hand. This does not mean the cyclinder is damaged, it is simply a result of the manufacturing process. To overcome this, start by ensuring that your feeder hoses to the cylinder are not connected (this would close the system and will not let air in or out). Using a ratchet strap or similar item, slowly put tension on the piston end and gently apply pressure trying to extend the piston out of the cylinder. Resistance will build up in the first couple inches of extending and then the "air lock" should break. You might get a little pop and the ratchet strap will loosen suddenly (hence the reason to apply pressure slowly) and now you should be able to extend and retract the piston by hand with little effort.

Ideal all-around power source develops 10,000 PSI at 100 PSI air. 2-stage release mechanism; internal relief valve. Pump, hold, or release load with pedal control.

Collision Services serves the auto body industry by creating and providing automotive repair shops with innovative and useful tools and equipment, as well as management and marketing aids for their business.

Ideal all-around power source develops 10,000 PSI at 100 PSI air. 2-stage release mechanism; internal relief valve. Pump, hold, or release load with pedal control.