submerged hydraulic pump factory

Manufacturer of hydraulic submersible pumps. Motor, cleaning and agitator pumps are offered. Made from ductile iron, chromium and aluminum materials. Available in 1,500 to 3,000 psi operating pressure, 185 to 300 ft. vertical head, 3 to 4 in. male cam lock discharge, 550 to 1,325 gpm water and 5 to 28 gpm hydraulic flow. Features include portable, self-priming, dry running, self-lubricating twin motors and anti-clog double suction. Pumps are available to rent. Suitable for oil, water, mud, solid handling, sewage, drilling, irrigation, fuel, agricultural, dewatering, wastewater, pond, jet and aquaculture applications.

Manufacturer of hydraulic submersible pumps including self-contained diesel powered pumps. Features include hydraulic-drive pump ends, cast chromium steel impellers, semi-recessed impeller for sewage and solids handling and double mechanical seal design. Available in different flow rates and sizes. Pump rental and 24/7 maintenance services are available. Capabilities include engineering, consulting, custom fabrication, rental engineering and training.

Custom manufacturer of submersible hydraulic pumps. Available in 2 to 24 in. discharge sizes with flow rate up to 18,000 gpm. Serves the agriculture, irrigation, mining, construction, wetland management, flood control drainage, sludge, slurry and manure waste handling, oil field, energy and refinery industries.

Distributor of hydraulic submersible pumps for handling mud, leaves, twigs, trash-laden water and soft solids up to 1 1/2 in. Specifications of hydraulic submersible pumps include 2 1/2 hp motor capacity, 1/2 in. air inlet size and 3 in. discharge size.

Distributor of submersible hydraulic pumps. Features vary depending upon model, including cast iron impellers, dual mechanical seals, seal sensor probes, stainless steel shafts, air-filled motors, replaceable power cords, 304 stainless steel motor housings, thermoplastic impellers, covers and ductile iron agitators. Repair services are also provided.

AMT, BJM, Barmesa Pumps, Cornell, Flygt, Goulds, Grindex, Hydromatic, ITT, MP Pumps, Mission, Oberdorfer, Pulsafeeder, Rheinhuette, Sero, Stancor, Versa-Matic

Distributor of submersible pumps for punching, crimping and cutting applications. Features vary depending upon model, including control pendants, motor controls and solenoid and manual valves. Repair services also provided.

Custom manufacturer and distributor of hydraulic submersible pumps. Various types include explosion proof grinder, high head, effluent, cast iron, sump, agricultural, sewage, chopper and non clogging wastewater pumps. Various applications include municipal, food processing, paper and wood products, automotive, chemical and mining. On-site and 24-hour services are available.

Allweiler Pumps, Analytic Scientific, Aurora, Aurora Weinman, Barnes Pumps, Bell & Gossett, Blackmer, Byron Jackson, Chessell, Clinton, Dickson, EMU, Flowserve, Flygt, GH Flow Automation, Gardner Denver, Gorman-Rupp, Goulds, Hydromatic, Hypochlorite, IDP, ITT, IWT, Infilco, Ingersoll-Rand, JWC,...

Distributor of submersible pumps made from stainless steel material. Slurry, shredder, sump, sewage, vortex, trash, sludge, solid handling, sand, explosion proof, agitator, residue, hydraulic, non-clog and utility pumps are also offered.

Ansimag, BJM, Blackmer, Cornell, Floway, Flowserve, Gardner Denver, Goulds Water Technology, Grundfos, Hydromatic, Inoxpa, KSB, LMI, LaBour, Liquiflo, Milton Roy, Patterson, Pioneer Pump, Pitbull, Sandpiper, Schurco Slurry, Seepex, Sundyne, Sunflo, Tuthill, Vertiflo, Weir, Williams

Distributor of submersible pumps including hydraulic submersible pumps. Submersible pumps are made of cast iron, stainless steel or plastic materials. Hydraulic submersible pumps are available in different sizes and configurations. Pump repair services are available.

Custom manufacturer of hydraulic pumps including hydraulic submersible pumps. Hydraulic pumps are fabricated in various flow capacities with operating pressures up to 2000 psi. Hydraulic pumps can be integrated with valves, motors, electronic controls and other custom devices. Capabilities include design engineering, prototyping, machining, assembling and testing. Hydraulic pumps are designed for use in aerospace, chemical, gas turbine, industrial, OEMs, mission critical and mobile market applications. Made in the USA.

System integrator for centrifugal, air, grinder, self-priming, solid handling and submersible pumps. Service and repair of any size, make and model of pumps. Design and installation from parts to complete treatment facilities. Complete in-house machine shop, on-site 24/7 and in-house or field repair services. Suitable for municipal applications. Serves the water and wastewater treatment industries.

Manufacturer of pumps and control panels for municipal and industrial sectors. Types of pumps include recessed impeller, encompassing submersible, horizontal, vertical and column style (sump) pumps.

Distributor of hydraulic powered submersible pumps. Types of submersible pumps also include submersible stainless steel pumps, submersible cast iron pumps, submersible impeller pumps, submersible solids handling pumps and submersible wastewater pumps. Single and multi-stage centrifugal pumps, jet pumps, fire pumps, rotary lobe pumps, progressive cavity pumps, short-shaft turbine pumps, metering pumps, booster pumps, grinder pumps, chemical metering pumps and end-suction centrifugal pumps are also available.

Distributor of and rental services for hydraulic submersible pumps. Other products available are well, constant pressure, environmental, DC, sump, commercial, peristaltic, double valve, bladder, grinder, borehole, fountain, and utility pumps.

Distributor of standard & custom pumps including hydraulic submersible pumps used in lawns. Submersible pumps are available in caste iron, bronze, stainless steel, plastic & fiberglass materials & in different sizes, styles & specifications. Services include consulting & designing, field surveying, start-up & technical assistance, infrared & laser alignment, vibration analysis, systems integration, trouble shooting & emergency & tailored repairs. Markets served include hospitals, pharmaceutical labs, municipalities, government, military, complexes, schools, airports & industrial.

Manufacturer of submersible & hydraulic submersible pumps. 4 in. submersible pumps are suitable for residential & small municipal water supply & light irrigation applications. 5 in. & larger submersible pumps are available for moving large amounts of water for irrigation & municipal water supply. Submersible motors, controllers & accessories are available as well.

Manufacturer of centrifugal pumps. Types of pumps include screw, pedestal, dry pit, hydraulic, self-priming, well, vertical, and submersible pumps. Products include mixers, platforms, trailers, washing equipment and mechanical seals. Markets served include agricultural, automotive, chemical/petrochemical, municipal, industrial, saltwater disposal, paper and wood, mining/sand and gravel, food processing and wastewater industries.

Distributor of pumps including centrifugal, industrial, process, chemical, reciprocating, progressive cavity, screw, submersible, wastewater, slurry and sanitary. Suitable for pumping acids, oils, grease, water, wax, wine and gasoline material. Mechanical seal, disc coupling, generators, floating skimmers, decanters, bar screens, dehydrators and float switches are available. Services include laser scanning, vibration analysis, preventive maintenance, packaging and assembly of pump system.

Distributor of industrial, residential, and commercial submersible pumps. Types include centrifugal, magnetic drive, effluent, sump, fountain, and trash pumps. Available in a variety of specifications and features. Suitable for use in transferring, circulating, and recirculating fluid applications.

Submersible, hydraulic pumps. Specializes in repair, refurbishment, calibration & product sales to government, military, telecommunications, cable, utility, alpine, transportation & private industry customers. Sell & service electronic & test equipment, hydraulic & pneumatic equipment, mechanical & fleet equipment, custom trailers, snow grooming equipment & tracked vehicles.

Manufacturer of electric pumps including hydraulic pumps & submersible hydraulic pumps such as variable electric pumps & double acting electric pumps. Hydraulic pumps are available with motors including 110 V, 50/60 Hz, single phase commutator motors. Operating pressure ranges up to 10000 psi. Hydraulic pumps are available with solenoid 2-way or 4-way valves & meet ANSI standards.

Manufacturer of submersible pumps and motors for residential and industrial applications. Types of pumps include electric, dewatering, solids handling wastewater, dry pit non-clog sewage, process stream, grinder and effluent pumps.

Manufacturer of standard & custom centrifugal slurry pumps including liquid waste, drainage, sewage, wastewater & slime pumps. Types of pumps include severe duty rubber slurry, heavy duty rubber slurry, severe duty metal slurry & heavy duty metal slurry. Heavy duty rubber slurry pumps feature double wall construction with molded rubber liners. Heavy duty metal horizontal end suction centrifugal slurry pumps range in sizes from 2 in. to 12 in & in capacities up to 17,000 gpm.

A hydraulic valve is a mechanical device that regulates the flow of the hydraulic fluid in a hydraulic system. Hydraulic systems are typically high pressure systems, ranging from 200 Bar averaging 700 Bar upwards...

Pump speed can be varied to meet job requirements, providing maximum efficiency and minimal fuel consumption. This makes these pumps much more efficient than constant-speed, generator-driven electric submersibles.

Hydraulic power units for 3" pumps are equipped with 13hp Honda gasoline or 10 hp Yanmar diesel engines on wheel kits. Power units for 4" and 6" sizes are equipped with a 63 hp Deutz diesel engine and skid base as standard.

SONHO Pump is a professional pump manufacturer established in 1995. It is engaged in research and development of all kinds of submerged pumps, including submersible pump, stainless steel pump for sus316, high flow low head axial flow, slurry pump, aquaculture submersible pump, chemical sewage wastewater pump, animal husbandry sewage pump, large-caliber wastewater discharge station pump and a wide range of submersible pumps, and to promote around the world and passed ISO9001 certification, CNS Engineering With submersible pump qualified factory, TAF pump test water laboratory, pump quality reputation, be sure to welcome all inquiries.

Stanley hydraulic pumps exemplify the pure power of hydraulic tools. Our SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it"s small size allows it to fit in a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).

For the past 45 years, MWI has led every major technological breakthrough in hydraulic-driven water pumps. The Duraflo™ hydraulic submersible trash pump is manufactured for durability, dependability, and performance. These pumps also reduce operational costs. These hydraulic water pump units are made for the toughest environments and can reliably run day and night.

The DuraFlo™ is one of the strongest and most reliable submersible trash pumps on the market. These extra heavy-duty pumps are built with the muscle and strength to handle the most difficult pumping jobs. Duraflo™ hydraulic submersible trash pumps have been tested in the harshest rental and contractor operations for environments where pumps must perform without fail. Whether you need a pump for a mining operation or in an industrial application, you can depend on this high-performance unit.

The SM50 water pump is fitted with dripless flat-faced HTMA quick couplers for easy connecting and disconnecting of the pump and hydraulic system. The water outlet is a 3-inch pipe thread fitted with a 3-inch groove fitting to which can be connected a cam hose end fitting. Access to the pumping chamber for cleaning requires the removal of only two cap screws. The motor with the impeller attached is then easily removed from the pump casing. The SM50 can draw down water to a depth of 3.5 inches. Putting the SM50 in a sump will allow it to pump all but 3.5 inches of water remaining in the sump. The integral screen effectively keeps solids larger than 3/8 of an inch out of the pump. The pump will handle clear water and water containing up to 10% solids.

Cornell’s Submersible pumps, designed to be continuously submerged in pumpage, maintain superb operating efficiencies and are coupled with premium efficient motors. All come standard with heavy walled volutes for extended life under abrasive service. Cornell’s auto-coupling system includes a cast iron discharge elbow, bronze guide claw flange, and stainless steel upper and intermediate guide rail brackets for high quality non-spark operation available.

Delta impellers handle stringy materials, rags, etc. and are available in pumps with up to a 10″ discharge size handling flows of 5,000 GPM and heads up to 400′

In one application, the company created a Hydraulic Tiller Dredge utilizing a Cornell hydraulic submersible 6NNT pump married with a CAT engine to remove bitumen from a retention pond. The pump package sits atop a six-foot long Caterpillar Landscape tiller. The tiller is lowered to the bottom of the pond and feeds constant slurry into the pump. The highly abrasive slurry is 50 percent harsh bitumen solids by weight, coursing through the pump at 2,000 gallons per minute.

The same company found another inventive use for a Cornell 6NNT and a Caterpillar tiller in a similarly challenging application. In order to pump sludge out of ponds, the package the company created had to be able to rapidly change locations, change pump depths, and tackle thick particulates. They ingeniously placed the hydraulic submersible pump on the end of a John Deere 410 excavator, replacing the Deere’s bucket with the pump and tiller. The excavator’s hydraulic system powers the pump. The pump is submerged in the sludge, and then the excavator boom moves the pump around like an egg beater to dredge out the pond.

Cornell pumps durability, reliability, and easy maintenance are keys to operating in the tough conditions and challenging environment. Cornell offers 10 versions of our submersible pump from three inch to 12 inch sizes.

A range of six hydraulic submersible pumps complete with high efficiency channel impellers or large solids handling screw impellers, designed for large solid handling and heavy sludge.

Pioneer hydraulic pumps come as standard in fully bunded, sound attenuated canopies complete with 120% containment and lockable doors, allowing the pumps to be used in urban bypass applications at less than 65dB(A) at 7 metres.

Available in a variety of sizes and impeller designs, the Pioneer hydraulic range extends the company reputation of high efficiency pumping in any application.

Since 1978, contractors have recognized Holland Pump as the premier choice for ruggedly designed and dependable portable submersible pumps. Engineered to pump continuously 24 hours a day under harsh conditions, Holland Submersible Pumps are ideal for high volume, low head applications such as lake dewatering, gravel pits, quarries, control boxes, and various open ditch applications. The power unit is designed to be placed in high locations up to 300 feet away from the pump head.

Submersible pumps do not require priming because the pump is submersed in the water. 90% of problems with suction pumps are in reliable priming with suction heads over 10 feet.

When faced with difficult pumping challenges such as high suction lifts exceeding 25′ or more, renting a hydraulic submersible pump is a great option.  This offers the contractor the ability to pump sludge and heavy solids effectively.  Hard to reach areas such as inside a building or cofferdams are no problem since the hydraulic pump can be located at the pumping source while the diesel engine power pack is located up to 150′-200′ away.