sunfab hydraulic pump parts manufacturer

The company Sunfab can trace its roots back to Sundins Fabriker, a family company that was established as long ago as 1925 and, for many years, was a successful manufacturer of skis. The first crane was built in 1947 by HIAB, a separate company. As time went on, demands increased for greater capacity, and in 1954, a hydraulic pump was developed that laid the foundation for the future successes of the new company, Sunfab.

These days, Sunfab Hydraulics AB supplies companies with some of the world’s most sophisticated products in its niche market. Products that meet stringent quality, environmental and safety requirements and offer functional solutions.

Our hydraulic Pumps and Motors undergo stringent testing in our own lab and test rigs during production to ensure unsurpassed reliability in the field. Our state-of-the-art production facility employs only the most experienced NC operators and Service Technicians.

The company Sunfab can trace its roots back to Sundins Fabriker, a family company that was established as long ago as 1925 and, for many years, was a successful manufacturer of skis. The first crane was built in 1947 by HIAB, a separate company. As time went on, demands increased for greater capacity, and in 1954, a hydraulic pump was developed that laid the foundation for the future successes of the new company, Sunfab.

These days, Sunfab Hydraulics AB supplies companies with some of the world’s most sophisticated products in its niche market. Products that meet stringent quality, environmental and safety requirements and offer functional solutions.

Our hydraulic Pumps and Motors undergo stringent testing in our own lab and test rigs during production to ensure unsurpassed reliability in the field. Our state-of-the-art production facility employs only the most experienced NC operators and Service Technicians.

Sunfab is a world leader in hydraulics. Technologically advanced hydraulic pumps, motors and, in particular, the first mobile lifting crane all originated from technology used by Eric Sundin for ski production in Hudiksvall. Ever since its foundation in 1925, Sunfab has been a family company characterised by innovation, skills and visions of the future.

Our head office is located in Hudiksvall, Sweden, where Sunfab´s products are manufactured in the company´s own factory.Our subsidiary companies can be found in Germany, France, UK, Spain, USA and Malaysia. We also sell our products via distributors and direct to customers all over the world.

Repairing and supplying re-manufactured and new Sunfab hydraulics – Sunfab hydraulics pumps and Sunfab hydraulics motors. Search our online catalog or contact us and let us know how we can help you.

We can supply what you need or repair what you have. Before purchasing, there may be a good chance that your current hydraulic pump or motor can be repaired. Sunfab hydraulics repairs and motor repairs come with our two year warranty.

When purchasing, consider Sunfab hydraulics units. Best of all they can get you back up and running for less than the cost of a new hydraulic unit. We will give you a free quote so you can compare costs for a new, repaired or re-manufactured Sunfab unit.

Sunfab Hydraulics was founded in Sweden by Eric Sundin as a ski production factory. As the ski business began to rapidly expand, they began implementing more and more hydraulics in their production systems. In 1947, he created the world’s first mobile hydraulic crane. This invention lead several more discoveries and the start of Sunfab Hydraulics. Eric Sundin died in 1975 and they discontinued making skis in 1989. It became Sunfab Hydraulics in the early 90s.

Sunfab Hydraulics offers a several variable pumps with varying displacements. With a working pressure of up to 450 bar, this pump can be used in almost all applications needed variable oil flow. The pump delivery flow can be adjusted between 0 and Qmax. The flow depends on the present drive speed and the geometric displacement.

Standard (SAP/ SCP 012-108 DIN): a lightweight pump covering a displacement range of 12-108 cm3⁄rev and a working pressure up to 400 bar. The rotation direction is easy to change by simply turning the connection cover.

SCP – ISO (SCP 012-130 ISO):a series for mobile and stationary hydraulics, covering a displacement range of 12-130 cm3⁄rev and working pressure of up to 400 bar. It is externally drained and provides high speed and flow. Available in left or right hand versions.

Sunfab has a range of dual flow pumps varying in size from 20/20 cm3 up to 76/76cm3. Dual flow hydraulic pumps are ideal for vehicles requiring two different flows. They are available with two equal large flows, or with one small and one large flow.

Sunfab offers a diverse range of hydraulic motors that meet SAE, ISO and DIN standard with a displacement of 12-130 cm3. They come with a choice of seals, shafts and connection ports. It has a high revolution speed and a working pressure up to 400 bar, allowing a power output of up to 285 kW.

Environment and Quality Assurance 5 Pumps fixed single flow 8 Pumps fixed dual flow 22 Pumps variable flow 30 THE SOURCE OF HYDRAULIC POWER have only just started Sunfab develops, produces and sells piston pumps and motors for operating demanding hydraulic equipment in mobile applications. The company Sunfab can trace its roots back to Sundins Fabriker, a family company that was established as long ago as 1925 and, for many years, was a successful manufacturer of skis. A fleet of vehicles ensured reliable transportation of raw materials to the factory. Heavy, irrational loading and...

Our knowledge gives power to hydraulics A series of factors have accounted for Sunfab’s success in the market. Creative and innovative development and long-term work have been combined with stringent demands on environmental accountability, function, quality and components. Our ability to listen to the real needs of our customers provides the essential impulses for driving developments forward and creating new, improved products. The commitment, sense of responsibility and creativity of our employees are other key factors. We strive to make continual improvements in all areas of our...

Sunfab is your supplier of a wide range of hydraulic pumps. The pumps are optimised for all kinds of applications. We offer 12 different sizes in the range of 12-130 cm3 with pressure up to 400 bar. The range of fixed displacement dual flow pumps SCPD and SLPD comprises 9 different sizes from 20/20 cm3 up to 53/53 cm3. The SCP dual flow pumps are of bent-axis design, the SLPD pumps are of inline design with swash plate. Pumps fixed dual flow Pumps variable flow We offer variable pumps with a displacement of 62, 92, 112 and 130 cm3. An operating pressure of up to 450 bar, different kinds of...

SCP 012-108 DIN is a series of piston pumps with a fixed displacement for demanding mobile hydraulics. SCP 012-108 DIN covers the entire displacement range 12-108 cm3 ⁄rev. at a maximum operating pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. It is either mounted directly on the power take-off, or on a frame bracket via an intermediate shaft. Other advantages: High maximum speed while maintaining low noise levels Smooth operation over the entire speed range Long life due to...

SAP 040-064 DIN covers the displacement range 40-64 cm3 ⁄rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. The pump is either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. Other advantages: Light weight metal casing design Smooth operation over the entire speed range Long life due to high demands on material selection, such as bearings, seals, etc Corrosian free light metal-housing Less heat generation due to better...

Nominal oil ow at pump speed SCP DIN Optimised is a series of piston pumps with a fixed displacement for demanding mobile hydraulics. Displacement Max pump speed: continuous intermittent Max operating pressure continuous intermittent Weight Tare-weight torque (M) Direction of rotation SCP 084, 108 DIN Optimised covers the displacement range 84 and 108 cm3 ⁄rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. It is either mounted directly on the power take-off or...

SCPT 090, 130 DIN is an addition to the SCP series that supports larger flows and pressure up to 300 bar. SCPT 090, 130 DIN are ideal for applications that require both a high flow and a high operating pressure in combination with demands on small installation measurements. The pumps are either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. Nominal oilspeed Max pump ow at pump speed continuous continuous Weight limited Max operating pressure continuous intermittent High maximum speed while maintaining low noise levels Smooth operation over the entire...

Pumps fixed single flow SCP DIN Optimised for Injector SCP DIN Optimised for Injector is an externally drained variant of the SCP series, which offers a very high oil flow in combination with the Sunfab injector K-Jet 2. SCP 084, 108 DIN Optimised for Injector is suitable for hydraulic motor operations in closed hydraulic systems with injector K-Jet 2 for pressurisation of the suction side. This gives excellent speed characteristics and high flows. The pump’s front shaft seals are manufactured from fluor rubber to withstand the higher temperatures involved with engine mounting. It is a...

The pump is either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. The stop shoulder on the angular housing allows the pump’s direction of rotation to be changed without the risk of altering the gear meshing. Other advantages: High maximum speed while maintaining low noise levels Smooth operation over the entire speed range Long life due to high demands on material selection, such as bearings, seals, etc O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off For more information, technical...

SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cm3 ⁄rev. at a maximum pressure of 400 bar. The pump’s well dimensioned, double tapered roller bearings permit high shaft loads and lead to excellent speed characteristics. The pump is drained externally. It is speed-optimised and therefore supplied for either left (L) or right (R) rotation direction. Other advantages: High maximum speed while maintaining low noise levels Smooth operation over the entire speed range Long life...

The third generation of the Sundins are still running the company in the spirit of Eric Sundin, its founder. The company’s head office is located in Hudiksvall, Sweden, however Sunfab’s subsidiary companies can also be found in Germany, France, the UK, Spain and the USA.

The company offers a wide range of hydraulic equipment for mobile hydraulics. The product range includes: single flow pumps, dual flow pumps, motors, variable pumps and a range of hydraulic accessories and components. Moreover, Sunfab manufactures a diverse range of hydraulic components, including: connections, gearboxes, suspensions, adapters / PTOs, valves for pumps/motors and speed sensors.

Price Engineering specializes in engineered custom products and solutions through engineering resource management, research, planning and development in the areas of hydraulics, pneumatics, automation and electrical systems.

Since 1965, Carotek has been providing process equipment solutions for the industrial, commercial and municipal markets in North Carolina, South Carolina, Tennessee, Georgia and Virginia. Carotek represents over 85 manufacturers as their process equipment distributor, representative, and repair service center for pumps, blowers, heat exchangers, valves, instrumentation, IIoT, steam, hydronics and municipal products. Carotek also fabricates process systems for our customers - complex process skids, electrical control automation systems and seal pots, as well as valve automation units, pump and blower skids.

Founded in 1969, P.S.I. has been providing superior hydraulic components and service to their customers for over 50 years. P.S.I. is structured into specialized business segments that serve the Marine, Mining, Oil, and Forestry Markets. P.S.I. is headquartered in Richmond, BC, Canada, with associates across five locations providing strong sales coverage throughout Western Canada. P.S.I."s commitment to quality combined with excellent service has resulted in the company becoming one of Canada"s largest and most trusted distributors of hydraulic components, electrical controls, and specialized fire suppression systems.

Perfection Servo developed a reputation as one of the leaders in industrial repair services quickly after opening its’ doors in 1979. We’re a ISO 9001:2015 certified business and our customers have learned to rely on the quality work that our technicians put into repairs in hydraulics, electronics, servo, and mechanical equipment. We understand that your business depends on a repair partner that will get you running quickly, which is why we repair and test units back to OEM specs to ensure our repair gets your line running again.

Our premier one-stop service and repair centers are at your disposal, regardless of your base of operations. We provide our unique brand of quality specialized services worldwide, covering a wide range of electronics, hydraulics, robotics, servos and mechanical repairs and remanufacturing.

K+S Services is ISO 9001:2015 registered and has locations throughout North America. Our team of skilled technicians have the ability to fully support the repair and service of electronics, hydraulics, mechanicals, motors, valves, spindles and torque tools. We offer free evaluations with the option for expedited repair and a 12 month in-service warranty with all of our repairs. Our repairs are system tested in our dynamic test stands. With our experience performing repairs on over 122,000 unique part numbers from more than 860 manufacturers, you can rest assured that K+S has the solution for you.

Amazon Hose & Rubber Company has a rich history of over 100 years of servicing the hydraulic and industrial hose and fitting market. With 5 locations across the state of Florida, our inventory features a wide range of hoses, tubing, fittings, pumps, v-belts, valves, clamps, spill containment and many other products. Our custom fabrication sets us apart as the leading hose and fitting distributor in the Southeast. Amazon Hose, a GHX Company, is able to cover a broad spectrum of applications for the industries we serve.

Offering you a complete choice of products which include Cat 424 Hydraulic Pump, Kawasaki Piston Hydraulic Variable Pumps, Sunfab Hydraulics Pumps, Rexroth Hydraulic Axial Piston Pump, CAT Hydraulic Piston Pump and Yeoshe Axial Piston Pump PARTS.

Our firm is a leading name, involved in providing a comprehensive series of KawasakiPiston Hydraulic Variable Pumps. Presented range is immensely admired owing to their top performance and reasonable rates

We are renowned organizations of market for presenting the optimum quality range of Rexroth Hydraulic Axial Piston Pump,which is extremely employed in the industry.

We are involved in present an exclusive range of PSMHydraulic Variable Pump. Our products are available in diverse specifications that meet on exact requirements of our patrons.

Our operationally reliable pumps and motors undergo tests in our own lab and test cells during production. Extensive technical expertise are gathered inside Sunfab"s walls.

A large proportion of the operating energy in the test lab and production tests is recycled in the company"s climate system (in line with the global care for the environment). Sunfab is quality certified according to ISO:2000.