torcup hydraulic pump made in china

With a worldwide network of representatives, distributors, calibration centers and staff, TorcUP provides technical support around the globe. We are available on site, on the phone or via Skype and email to give you unparalleled support for your technical needs.

... follows: up to 25MPa for gear pumps, 16MPa for vane pumps and 28MPa for piston pumps. The capacity for the gear pumps is up to 60cm3/rev and up to 100cm3/rev for the ...

Air Pumps from AP Series of TorcUP works for you when electricity does not. These pumps are a quality show from TorcUP to meet customer needs in explosive environments or any application when electricity ...

Hand or foot pumps – Nominal pressure: 700 bars. Overload valve operating pressure: 720 bars.Dual-stage (two-speed) pumps fitted in their standard versions with a coupler complying with NFC 33090-4 ...

A hydraulic pump is the power source in a hydraulic system. It is driven by an engine or an electric motor and pumps oil from the hydraulic oil reservoir ...

... piston variable displacement pumps, Series 20, are of swash plate design with variable flow capability suitable for hydrostatic transmissions with closed circuit. The flow rate is in proportional relation with the input ...

... properties. This new thrust block design also incorporâtes advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluoropolymer PTFE wear surface ...

Hand pumps for tensioning tools are lightweight and mobile by design. With different pressures and capacities available, Hytorc can provide you with the flexibility you need. Our hand pumps have built ...

Rotork offers a range of high quality hydraulic pumps for applications in the upstream and downstream oil and gas industries. These include an extensive range of axial piston oil pumps ...

... lightweight and portable hydraulic hand pump, specifically designed for high pressure applications. A fine adjust allows precise control of pressure, while a vent valve provides quick and positive shut-off ...

Air hydraulic pumps, working pressure 700 bar, using a pressure multiplicator. Recommanded solution to replace hand pumps. For single and double acting cylinders

... socket and etc. hydraulic lifting tools include: double acting jacks, single acting jacks, hollow jacks, big tonnage jacks.hydraulic pulling tools include: hydraulic pullers.Power pack ...

... socket and etc. hydraulic lifting tools include: double acting jacks, single acting jacks, hollow jacks, big tonnage jacks.hydraulic pulling tools include: hydraulic pullers.Power pack ...

... Drive communicates with the pump via 9v DC remote control. This ensures safety and eliminates the need of electrical cord between pump and drive that other manufacturers provide. Silent during use. ...

Genuine TorcUP DesignThe EP series hydraulic torque wrench pump is manufactured to withstand harsh environments and heavy duty applications. Adjust the pressure to the desired PSI/Bar to achieve proper torque output each and every time. Whether running one tool or four, the EP series pumps are the power that guarantees the job will get done.

Each pump comes standard with one set of 15" twinline hydraulic hoses. The hoses are 4:1 safety rated and made of durable steel mesh in a protective rubberized coating. Longer lengths of hoses available to accommodate various needs.

Each pump comes standard with one set of 15" twinline hydraulic hoses. The hoses are 4:1 safety rated and made of durable steel mesh in a protective rubberized coating. Longer lengths of hoses available to accommodate various needs.

The permanent magnet motor driving the EP500 Series runs at 1/3 of the RPM found in other hydraulic pumps. Field-proven gears run cooler and last longer to provide years of trouble free service

Powder coated aluminum reservoir is lightweight yet durable for operating in the harshest environments. The pump comes standard with a 1 gallon reservoir.

Each pump comes standard with one set of 15" twinline hydraulic hoses. The hoses are 4:1 safety rated and made of durable steel mesh in a protective rubberized coating.

The permanent magnet motor driving the EP1000 Series runs at 1/3 of the RPM found in other hydraulic pumps. Field-proven gears run cooler and last longer to provide years of trouble free service

Powder coated aluminum reservoir is lightweight yet durable for operating in the harshest environments. The single port pump comes standard with a 1.5 gallon reservoir, and the quad version pump comes with a 2.5 gallon reservoir.

The pump can be ordered with an installed four port manifold for operating four tools concurrently. This version comes complete with a 2.5 gallon reservoir.

Each pump comes standard with one set of 15" twinline hydraulic hoses. The hoses are 4:1 safety rated and made of durable steel mesh in a protective rubberized coating.

Genuine TorcUP DesignThe AP series is there for you when electricity is not. In explosive environments or on applications when air is more readily available than electricity, the AP series pumps are another example of TorcUP’s attention to the needs of our customers. Capable of running up to four tools the AP series brings safety to your application.

Each pump comes standard with one set of 15" twinline hydraulic hoses. The hoses are 4:1 safety rated and made of durable steel mesh in a protective rubberized coating. Longer lengths of hoses available to accommodate various needs.

The pump can be ordered with an installed four port manifold for operating four tools concurrently. This version comes complete with a 1.5 gallon reservoir.

Each pump comes standard with one set of 15" twinline hydraulic hoses. The hoses are 4:1 safety rated and made of durable steel mesh in a protective rubberized coating.

Raptor is the result is a pneumatic wrench that is optimized down to the finest detail. The backbone of any pneumatic torque wrench is its gears. The gears that are the driving force behind the RP Series are designed with an increased durability factor. The full line of RAPTORs have endured more abuse from long term testing than these tools will ever experience in the field. If you require a pneumatic torque wrench that will be there for you on the job, look no further than the TorcUP RAPTOR!

TorcUP has created an industrial torque tool line which excels when others strive to just exist. Every TorcUP product design starts with a Clean Sheet. We have a laser-like focus on the best engineering practices and a dynamic ideology that tests every possibility. Safety is At The Heart of our product design. Users always want lighter and faster, but this can never be at the expense of safety and durability. We test to destruction – so you never have to. TorcUP is always looking Forward With A Focus on the bigger picture.

The TorcUP line of Industrial Sockets feature free corner design for flats above 5/8″ (17mm). All TorcUP Industrial Impact Sockets are made from high strength alloy steel, heat treated for the best combination of strength and impact resistance. With optimum wall thickness, TorcUP sockets have the strength to withstand the necessary torque and the access to reach the most restricted of nuts. The depth of the hex openings are designed to accommodate the nut, for full engagement.

By using hydraulic torque, traditional methods of tightening using increased manpower is eliminated. Also reduces tightening time and operator fatigue by replacing manual effort with the use of controlled tooling.

We are a leading Manufacturer of 3 Speed Torque Wrenches Pump TWP304 Series (700 Bar), Aero Boom AB-FPH5-ME21 Torque Wrench Pump, TorcUP SV1000 Torque Wrench Pump, TorcUP EP500 Torque Wrench Pump, Aero Boom TWP 2 Torque Wrench Pump and Torque Wrenches Pumps from Thane, India.

TorcUP has taken every care in preparing this Operational Manual that is intended as a technical guideline only. TorcUP accepts no liability in relation to any use or reliance made of any information in this Operational Manual. All information, illustrations and specifications in this Operational Manual are based on the latest information avail- able at the time of publication. The right is reserved to make changes at any time without notice. Equipment operators and installers shall be responsible for ensuring that a safe working environment and safe systems of work are in place before operating the equipment.

TorcUP has taken every care in preparing this Operational Manual that is intended as a technical guideline only. TorcUP accepts no liability in relation to any use or reliance made of any information in this Operational Manual. All information, illustrations and specifications in this Operational Manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice. Equipment operators and installers shall be responsible for ensuring that a safe working environment and safe systems of work are in place before operating the equipment.

Compact automatic three stage ow, maxef ciency.Ÿ You can use manifold to operate 4 wrenche simultaneously.Ÿ Working pressure: 40~700 bar.Ÿ With ef cient radiator, the pump can work 24hours continuously.Ÿ Applicable on both one or two wrenches simultaneously.Ÿ Aluminum oil tank with oil gauge and thermometer