voith hydraulic pump manufacturer

Voith Turbo H + L Hydraulic (VTHL) is a world-class manufacturer of innovative components and systems of fluid-technical drive and control engineering. Voith systems are characterized by:

Energy-saving – through internal gear pumps with high efficiencies, low and high-pressure systems with automatic change-over and accumulator charging technology

For hydraulic systems that place high demands on control engineering, servo pumps are the perfect solution. The basic version of these pump systems also consists of three main components:Servo inverter

Servo pumps control the pressure or the volume flow. They precisely convert electrical energy into the hydraulic energy that is currently needed in the system. The classic use of valves for control can be either completely or partially omitted. This considerably simplifies every hydraulic system.

The torque converter provides the most time-efficient startup and shutdown of a storage pump. It transmits torque and/or power from the motor generator to the pump shaft by being filled with process water.

The startup of the storage pump already begins during the filling process. As the pressure level of the filling water rises, the torque output by the converter increases and thus accelerates the pump. This acceleration torque, which is initially very high, continuously decreases as secondary speed rises. When reaching the synchronous speed, the converter output torque corresponds to the pump priming torque.

Voith components record and transmit a wide range of operating parameters, including pressure, acceleration and temperature. Further information such as oil level, filter condition and plant efficiency can be collected for the purpose of condition monitoring. A software package is programmed to receive data from the servo inverter at regular intervals. This stored data then serves as a base, and deviations are immediately detected and predictive maintenance initiated. Through this process both the machine and system is optimized, saving valuable time and earnings. Furthermore, on-site service calls as a result are reduced by up to 70 percent.

Voith pumps offer high volumetric efficiency and provide the ideal solution for variable speed drives while offering overall efficiency improvements through reducing ma­chine or system power consumption.

The range of internal gear pumps comprises: IPS, IPVA, IPVAP, IPCA, IPCAP, IPC, IPVS, IPH and IPV series. They are well-suited for any application in the low, medium, and high-pressure range. The pumps are available as: single pumps, pump combinations (multi-flow pumps, multi-circuit pumps), motor pump units, variable speed pumps and servo pumps.

Please contact us for further technical details and configuration options or if you cannot see the Voith hydraulic pumps that you need listed – we’ll be delighted to help!

Progressive Power & Control sells internal gear pumps, high pressure gear pumps, low-viscosity fluid pumps, multiple flow pumps from Voith Turbo. Voith Turbo purchased H+L Hydraulik GmbH & Co. KG formerly known as Hartmann+Lämmle GmbH Co. KG, enhancing the Voith hydraulic component offerings with the VTHL (or VT H+L) hydraulics division to serve mobile hydraulics and industrial hydraulic customers.

Voith pumps are also used in many manufactured systems. Rather than pay the "upcharge" from the manufacturer, we can frequently provide you with the exact Voith replacement component you need for your equipment.

Voith internal gear pumps allow you to save space in your machine. The high rates of efficiency, thanks to gap compensation, allow efficient operation, and the optimized pressure progressions ensure low pump flow and pressure pulsations in your hydraulic system. This, combined with a compact force guide inside the Voith internal gear pump, reduces noise emissions so you can more easily meet the ever tightening workplace regulations on sound output.

Both the high-pressure and medium-pressure Voith IP pumps share similar design features, including radial compensation, axial compensation, internal gearing and plain bearings which ensure a smooth flow with minimal pulsation. IP pumps can be combined to create systems with multiple flows.

Internal gear rotation draws hydraulic oil or other pressure fluid into the area between the pinion gear and the internal gear. Radially, the gear chambers are closed by the gear teeth meshing. Pressure fluid is displaced when the tooth heads enter the gaps between gear teeth. The axial plates seal the pressure chamber with the minimal possible gap, reducing volume loss and increasing efficiency.

Voith IP pumps of the same or different sizes can be combined to form multiple-flow pumps. All sizes of Voith multi-flow pumps are available as two or three-flow pumps, and as four-flow pumps by custom order.

Directional control fast pilot valves make switching times possible, over 50% faster than direct-controlled valves. Switching time adjustment, stroke limiter and monitoring are available as options. Voith Turbo Hydraulics offers special equipment with standard directional control valves. Due to the compact building design with standing magnet (double solenoid coil with 4/3 valves) the valves can be integrated even in the smallest fitting spaces.

Voith Turbo hydraulic flow control valves are pressure compensated in the millisecond range, and changes in viscosity do not influence the flow rate.

Direct-controlled Voith Turbo pressure control valves are constructed in seat or piston design. The pressure control valve cartridges can be built directly into control blocks. Voith accumulator charging valves with constant switching limit and soft switching are particularly suitable for drive systems. Use memory load valves to design the installed drive power for the average need. All pressure control valves can be equipped with a gauge connecting valve.

The combination of structure and intermediate plate devices permits the realization of control units with many functions in a small space. The control paths and thus the oil columns are kept very short, a necessary condition for good dynamic behavior of the hydraulic control.

Pressure relief valves, type DBV, are capable of controlling and limiting the operating pressure and the flow rate in a hydraulic system. Independent of the set maximum operating pressure, the valve can switch to pressure-free circulation hydraulically, electromagnetically or via an external control oil connection.

The pressure relief valves DBV 50/60 switch the flow on and off depending on the pressure (hysteresis normally set to 10% of system pressure). To allow direct attachment to hydraulic pumps, and especially Voith IP pumps, the pressure relief valves are available with SAE flange connections in 4 sizes (10, 16, 25, 32 mm). The installation orientation can be freely selected.

VTHL electro-hydraulic amplifiers are numerically controlled precision drives. They consist of the set value input assembly, follow-up control valve and the actuator, which can be either a cylinder or a hydraulic motor. Actuator and follow-up control valve are linked by mechanical feedback. Electric low-power set value input combined with a hydraulic actuator result in high power density, low energy consumption, and high closed-loop gain. The electronic controls are coordinated with the special requirements of electro-hydraulic amplifiers. Interface modules make interfacing possible to all kinds of machine controls.

Voith Turbo has succeeded in integrating the well-established internal gear pumps, type IPM (medium pressure, up to 175 bar) and type IPV (high pressure, up to 330 bar) in an asynchronous electric motor. With that an electro-hydraulic unit is available which is very compact in design while also ensuring remarkable low noise emissions. Variable flow from fixed displacement pumps, electric motor - pump - aggregate (with frequency inverter)

The EPA/EPAF Voith internal gear pump or pump combinations generate pressure and volume flow. Asynchronous motor to drive the pump. Frequency inverter for controlling the speed of the motor. EPA/EPAF units can be created with all Voith internal gear pumps

The EPAF variable-speed motor pump unit with the internal gear pump which was specially developed for the delivery of low-viscosity media. Due to its renowned high efficiency, the IPME pump type is particularly suited as a delivery pump for the cooling lubricant circuit in machines with internally cooled tools. A pressure-dependent drive speed control allows cooling lubricant to be delivered as and when it is required. Pressures up to 100 bar can be generated.

VTHL hydraulic units guarantee your pressure supply. With Voith"s accumulator charging technique you generate exactly as much hydraulic energy as demanded by the process. The momentary available volume flow, dependent on the selected accumulator size, will be a multiple of the actually installed pump volume capacity.

Voith Turbo hydraulicThe use of liquids to transmit force and energy. pumps / internal gear pumps - IPH, IPV, IPC and IPN - also as double pumps, multiple pumps or add-on pumps:

Are you looking for a dual flow or multiple flow pump, or a single internal gear pump by Voith? No problem, contact us and our team will help you as quickly as possible!

Zuosen Hydraulic is one of the world"s leading manufacturers and suppliers of professional hydraulic piston pumps, hydraulic vane pumps, gear pumps, hydraulic valves, and accessories. The Factories are located in the Chinese leading manufacturing center- Foshan and Dongguan city.ZUOSEN owned advanced and precision machines and equipment, like Emag gear hobbing machine, Mitsubishi gear hobbing machine, Liebherr gear shaping machine, Horizontal machining center DMG MORI, CNC grinding machine, NC honing machine, CNC lathe, etc. Zuosen also owned the precision measuring equipment, like the three coordinates measuring instrument, Gear measuring center, Rockwell hardness tester, the noise test room, Pressure &Flow & Temperature test platform, Surface Roughness & Dynamic Balance Tester leakage detecting tools, etc. Now Zuosen has a hundred long-term distributors and partners worldwide.

Voith IPVAP5-50-101 Hydraulic internal gear pump is very popular among the industries which are related to servo machines. Voith IPVAP series Hydraulic Pump generates too much pressure to get desired work with precision. Voith internal gear pump dealer is in wazirpur industrial area, Delhi, India.

Voith Turbo H + L Hydraulic is a subsidiary of Voith Turbo. Voith Turbo, a Group Division of Voith GmbH, is a specialist for intelligent drive solutions and systems. Customers from highly diverse industries such as oil and gas, energy, mining and metal processing, mechanical engineering, ship technology, rail and commercial vehicles rely on advanced technologies from Voith Turbo.

Voith sets standards in the markets energy, oil & gas, paper, raw materials and transportation & automotive. Founded in 1867, Voith employs almost 39 000 people, generates EUR 5.3 billion in sales, operates in about 50 countries around the world and is today one of the largest family-owned companies in Europe.

Voith Turbo H+L Hydraulic (VTHL) is a manufacturer of innovative components and systems of fluid-technical drive and control engineering, taking a leading position world-wide.

Energy-saving - through internal gear pumps with high efficiencies, low and high-pressure systems with automatic change-over and accumulator charging technology.

FLSPL using Nachi hydraulic components since years, now has a technical partnership for the use of Nachi hydraulic components in the application design. FLSPL committed to the performance guarantee and extending service.

NACHI Hydraulic is a division of NACHI-FUJIKOSHI CORP, JAPAN, is a comprehensive manufacturer of a full range of hydraulic equipment, Nachi-Fujikoshi manufactures, markets, and provides a wide range of other services for a full lineup of outstanding hydraulic products.

Nachi-Fujikoshi reputation for compact equipment that delivers energy efficiency, safety, and high performance. The equipment is also constantly refined by the quest for ultimate hydraulics that combine great power with flexible motion control.

Sophisticated manufacturing processes and the competence of developing high performance conventional hydraulic valves along with the economical feasibility, puts them apart from the competitors in the segment

SUN Hydraulics, designs and manufactures high-performance, screw-in hydraulic cartridge valves and manifolds which control force, speed and motion as integral components.

FLSPL bring you Sun Hydraulics" products providing superior value due to their high-quality, high-performance characteristics. Sun Hydraulics" cartridge valves are differentiated by their two-piece, floating style construction, which allows them to operate reliably at higher pressures and flow rates than competitive products of equal size. These products provide our designers the opportunity to develop unique, reliable solutions for hydraulic control applications.

FLSPL brings in another technically strong company that manufacturing high quality external gear pumps and flow dividers. It is been since years now, FLSPL extending the support and service for these high quality products.

Vivoil Oleodinamica Vivolo, have been producing high quality, high performance hydraulic gear pumps, hydraulic gear motors and geared flow dividers since 1985. The company applies innovative solutions to hydraulic system requirements.

Flow dividers allowing a single pump flow to be "split" into a varying number of separate flows is a significant proportion of Vivoils" production. Their accrued expertise in this field means that they have the technical ability to offer solutions to many circuit applications.

Using their precision gear pump technology, allows Vivoil to produce an extensive range of flow dividers, with or without “phase correction “ integral valves”. Equal or un-equal displacements, up to 16 sections, can be combined to offer many solutions for applications requiring flow to be divided to operate different parts of the hydraulic circuit.

With a wealth of knowledge & experience with Voith pumps, Tri-State Hydraulics can easily assist in the repair or replacement of any Voith pumps. Voith serves a number of different markets across the globe.

Tri-State Hydraulics carries an inventory of Voith pumps onsite and keeps every product in ready-to-ship condition. Tri-State also fully tests and sets each product to OEM specifications with our proven check system prior to shipping. Also included is Tri-State’s full suite of service including comprehensive reconditioning, full part replacement, expert support and a test facility. Contact us today at (847.439.8987) and we will quickly diagnose and repair your Voith pumps.

Voith IPVAP5-50-101 Hydraulic internal gear pump is very popular among the industries which are related to servo machines. Voith IPVAP series Hydraulic Pump generates too much pressure to get desired work with precision. Voith internal gear pump dealer is in wazirpur industrial area, Delhi, India.

Micron Hydraulics specialise in the repair and reconditioning of Voith pumps and motors across their entire range. In addition we carry an extensive range of spare parts to enable us to carry out the work in the quickest time possible. Where units have become obsolete we can manufacture and source parts to refurbish these units to a high warranted standard.