voith hydraulic pump in stock

For hydraulic systems that place high demands on control engineering, servo pumps are the perfect solution. The basic version of these pump systems also consists of three main components:Servo inverter

Servo pumps control the pressure or the volume flow. They precisely convert electrical energy into the hydraulic energy that is currently needed in the system. The classic use of valves for control can be either completely or partially omitted. This considerably simplifies every hydraulic system.

Voith components record and transmit a wide range of operating parameters, including pressure, acceleration and temperature. Further information such as oil level, filter condition and plant efficiency can be collected for the purpose of condition monitoring. A software package is programmed to receive data from the servo inverter at regular intervals. This stored data then serves as a base, and deviations are immediately detected and predictive maintenance initiated. Through this process both the machine and system is optimized, saving valuable time and earnings. Furthermore, on-site service calls as a result are reduced by up to 70 percent.

Zuosen Hydraulic is one of the world"s leading manufacturers and suppliers of professional hydraulic piston pumps, hydraulic vane pumps, gear pumps, hydraulic valves, and accessories. The Factories are located in the Chinese leading manufacturing center- Foshan and Dongguan city.ZUOSEN owned advanced and precision machines and equipment, like Emag gear hobbing machine, Mitsubishi gear hobbing machine, Liebherr gear shaping machine, Horizontal machining center DMG MORI, CNC grinding machine, NC honing machine, CNC lathe, etc. Zuosen also owned the precision measuring equipment, like the three coordinates measuring instrument, Gear measuring center, Rockwell hardness tester, the noise test room, Pressure &Flow & Temperature test platform, Surface Roughness & Dynamic Balance Tester leakage detecting tools, etc. Now Zuosen has a hundred long-term distributors and partners worldwide.

Zuosen Hydraulic is one of the world"s leading manufacturers and suppliers of professional hydraulic piston pumps, hydraulic vane pumps, gear pumps, hydraulic valves, and accessories. The Factories are located in the Chinese leading manufacturing center- Foshan and Dongguan city.ZUOSEN owned advanced and precision machines and equipment, like Emag gear hobbing machine, Mitsubishi gear hobbing machine, Liebherr gear shaping machine, Horizontal machining center DMG MORI, CNC grinding machine, NC honing machine, CNC lathe, etc. Zuosen also owned the precision measuring equipment, like three coordinates measuring instrument, Gear measuring center, Rockwell hardness tester, the noise test room, Pressure &Flow & Temperature test platform, Surface Roughness & Dynamic Balance Tester leakage detecting tools, etc. Now Zuosen has a hundred long-term distributors and partners worldwide.

With a wealth of knowledge & experience with Voith pumps, Tri-State Hydraulics can easily assist in the repair or replacement of any Voith pumps. Voith serves a number of different markets across the globe.

Tri-State Hydraulics carries an inventory of Voith pumps onsite and keeps every product in ready-to-ship condition. Tri-State also fully tests and sets each product to OEM specifications with our proven check system prior to shipping. Also included is Tri-State’s full suite of service including comprehensive reconditioning, full part replacement, expert support and a test facility. Contact us today at (847.439.8987) and we will quickly diagnose and repair your Voith pumps.

Progressive Power & Control sells internal gear pumps, high pressure gear pumps, low-viscosity fluid pumps, multiple flow pumps from Voith Turbo. Voith Turbo purchased H+L Hydraulik GmbH & Co. KG formerly known as Hartmann+Lämmle GmbH Co. KG, enhancing the Voith hydraulic component offerings with the VTHL (or VT H+L) hydraulics division to serve mobile hydraulics and industrial hydraulic customers.

Voith pumps are also used in many manufactured systems. Rather than pay the "upcharge" from the manufacturer, we can frequently provide you with the exact Voith replacement component you need for your equipment.

Voith internal gear pumps allow you to save space in your machine. The high rates of efficiency, thanks to gap compensation, allow efficient operation, and the optimized pressure progressions ensure low pump flow and pressure pulsations in your hydraulic system. This, combined with a compact force guide inside the Voith internal gear pump, reduces noise emissions so you can more easily meet the ever tightening workplace regulations on sound output.

Both the high-pressure and medium-pressure Voith IP pumps share similar design features, including radial compensation, axial compensation, internal gearing and plain bearings which ensure a smooth flow with minimal pulsation. IP pumps can be combined to create systems with multiple flows.

Internal gear rotation draws hydraulic oil or other pressure fluid into the area between the pinion gear and the internal gear. Radially, the gear chambers are closed by the gear teeth meshing. Pressure fluid is displaced when the tooth heads enter the gaps between gear teeth. The axial plates seal the pressure chamber with the minimal possible gap, reducing volume loss and increasing efficiency.

Voith IP pumps of the same or different sizes can be combined to form multiple-flow pumps. All sizes of Voith multi-flow pumps are available as two or three-flow pumps, and as four-flow pumps by custom order.

Directional control fast pilot valves make switching times possible, over 50% faster than direct-controlled valves. Switching time adjustment, stroke limiter and monitoring are available as options. Voith Turbo Hydraulics offers special equipment with standard directional control valves. Due to the compact building design with standing magnet (double solenoid coil with 4/3 valves) the valves can be integrated even in the smallest fitting spaces.

Voith Turbo hydraulic flow control valves are pressure compensated in the millisecond range, and changes in viscosity do not influence the flow rate.

Direct-controlled Voith Turbo pressure control valves are constructed in seat or piston design. The pressure control valve cartridges can be built directly into control blocks. Voith accumulator charging valves with constant switching limit and soft switching are particularly suitable for drive systems. Use memory load valves to design the installed drive power for the average need. All pressure control valves can be equipped with a gauge connecting valve.

The combination of structure and intermediate plate devices permits the realization of control units with many functions in a small space. The control paths and thus the oil columns are kept very short, a necessary condition for good dynamic behavior of the hydraulic control.

Pressure relief valves, type DBV, are capable of controlling and limiting the operating pressure and the flow rate in a hydraulic system. Independent of the set maximum operating pressure, the valve can switch to pressure-free circulation hydraulically, electromagnetically or via an external control oil connection.

The pressure relief valves DBV 50/60 switch the flow on and off depending on the pressure (hysteresis normally set to 10% of system pressure). To allow direct attachment to hydraulic pumps, and especially Voith IP pumps, the pressure relief valves are available with SAE flange connections in 4 sizes (10, 16, 25, 32 mm). The installation orientation can be freely selected.

VTHL electro-hydraulic amplifiers are numerically controlled precision drives. They consist of the set value input assembly, follow-up control valve and the actuator, which can be either a cylinder or a hydraulic motor. Actuator and follow-up control valve are linked by mechanical feedback. Electric low-power set value input combined with a hydraulic actuator result in high power density, low energy consumption, and high closed-loop gain. The electronic controls are coordinated with the special requirements of electro-hydraulic amplifiers. Interface modules make interfacing possible to all kinds of machine controls.

Voith Turbo has succeeded in integrating the well-established internal gear pumps, type IPM (medium pressure, up to 175 bar) and type IPV (high pressure, up to 330 bar) in an asynchronous electric motor. With that an electro-hydraulic unit is available which is very compact in design while also ensuring remarkable low noise emissions. Variable flow from fixed displacement pumps, electric motor - pump - aggregate (with frequency inverter)

The EPA/EPAF Voith internal gear pump or pump combinations generate pressure and volume flow. Asynchronous motor to drive the pump. Frequency inverter for controlling the speed of the motor. EPA/EPAF units can be created with all Voith internal gear pumps

The EPAF variable-speed motor pump unit with the internal gear pump which was specially developed for the delivery of low-viscosity media. Due to its renowned high efficiency, the IPME pump type is particularly suited as a delivery pump for the cooling lubricant circuit in machines with internally cooled tools. A pressure-dependent drive speed control allows cooling lubricant to be delivered as and when it is required. Pressures up to 100 bar can be generated.

VTHL hydraulic units guarantee your pressure supply. With Voith"s accumulator charging technique you generate exactly as much hydraulic energy as demanded by the process. The momentary available volume flow, dependent on the selected accumulator size, will be a multiple of the actually installed pump volume capacity.

Overhaul-, maintenance-service on pumps, motors, hydraulic systems for mobile and industrial fields. We supply spare-parts and components of the different brands as Sauer Danfoss, Poclain Hydraulics, Linde, in the main Italian cities as Modena, Brescia, Bologna, Padova, Bergamo, Verona, Torino, Milano, Firenze, Roma, Napoli, Catania, Genova.

- The ring and shaft teeth processing for Voith internal gear pumps are extraordinarily precise thanks to a special production procedure. This keeps the pressure pulsation extremely low, improves the control loop performance in the hydraulic system, and allows your machine or system to function with high precision. The manufactured products are of exceptionally high quality. An additional plus is the low noise emission. This reduces the effort and costs associated with noise abatement. Workplace guidelines can be met in most cases without the need for additional measures.

- Our optimized radial and axial gap compensation reduces volumetric losses over the entire operating pressure range. This helps Voith internal gear pumps achieve excellent volumetric efficiency. This results in better overall efficiency and energy savings during operation. The high volumetric efficiency of Voith"s internal gear pumps makes them ideal for variable speed drives. With variable speed drives, energy cost savings in hydraulic systems can reach 70% and noise emissions can be reduced by up to 25 dB(A).

- Voith internal gear pumps are built to be robust, compact, light, and low-maintenance. They commonly feature a service life of several decades and high availability. Your hydraulic system operates reliably, keeping your maintenance costs low and your maintenance downtimes short.

Voith pumps offer high volumetric efficiency and provide the ideal solution for variable speed drives while offering overall efficiency improvements through reducing ma­chine or system power consumption.

The range of internal gear pumps comprises: IPS, IPVA, IPVAP, IPCA, IPCAP, IPC, IPVS, IPH and IPV series. They are well-suited for any application in the low, medium, and high-pressure range. The pumps are available as: single pumps, pump combinations (multi-flow pumps, multi-circuit pumps), motor pump units, variable speed pumps and servo pumps.

Please contact us for further technical details and configuration options or if you cannot see the Voith hydraulic pumps that you need listed – we’ll be delighted to help!

VOITH Internal Gear Pumps are working reliably in hundreds of thousands of machines worldwide. With sophisticated technology, robust design and cost-efficient operation Voith internal gear pumps reliably work at high pressures, while providing low operating noise, low pulsation and high efficiency even at low speed. Used in machines in the plastics and sheet-metal processing sectors, presses as well as conveying and lifting equipment, the Voith pumps have countless applications in low, medium and high pressure applications.

Founded in Germany in 1867, the Voith Group is a leading global provider of technical and industrial services, providing customers in five key market sectors with a wide range of products and technical services worldwide, including hydraulic pumps, fuel oil and gas, paper, raw materials, and transportation and drive equipment, etc.

Voith products are widely used in industrial applications around the world, from factories to road and rail vehicles to water conservancy. The technical services provided by Voith have always been favored by large European companies.

As one of trusted Voith gear pump suppliers in China for years, OKmarts can provide you with a wide range of Voith hydraulic pumps. On our website, you can get the quickest response, largest available inventory, shortest lead times and the most competitive Voith gear pump price.