voith hydraulic pump repair free sample

Our service covers all components between the driver and driven machine, from electric and turbine- driven pumps, to compressors and blowers, to fans and generator sets. Voith is your skilled service partner. We offer customized service packages and a high degree of know-how and reliability.

For hydraulic systems that place high demands on control engineering, servo pumps are the perfect solution. The basic version of these pump systems also consists of three main components:Servo inverter

Servo pumps control the pressure or the volume flow. They precisely convert electrical energy into the hydraulic energy that is currently needed in the system. The classic use of valves for control can be either completely or partially omitted. This considerably simplifies every hydraulic system.

Basic polishing work (e.g. on bearings, planetary bolts, toothing) and repairs (e.g. removing corroded areas, grinding out teeth, scraping out bearings) are included in an overhaul

If continued operation is not possible, we will transport the gearbox as quickly as possible to the nearest Voith workshop or to our headquarters in Sonthofen, Germany. Your turbo gear unit will be productive again within a maximum of 9 to 15 weeks.

In an emergency, a qualified Voith service technician can be at your plant within 48 hours, even if you are in a remote location! Often, on-site repair enables continued operation on either a permanent or temporary basis. Our competent service technician takes the decision regarding on-site repair and does this alone or with the support of other experts from our "Customer Support".

Avoid expensive subsequent damage by using original Voith spare parts. Reliable, robust, economical: Only Voith original spare parts are technically of state-of-the-art series production and tuned perfectly to the complete system. With our original spare parts, we offer high product quality and thus mobility and security when on the road.

Gearbox-specific spare parts catalogs save you time-consuming, costly searches. And the parts will be available for at least 15 years – guaranteed! For a preventive overhaul, Voith offers high-quality replacement gearboxes and components for the central DIWA gearbox assemblies. You reduce the downtime for your buses and lower repair and overhaul costs – without compromising quality and reliability.

Progressive Power & Control sells internal gear pumps, high pressure gear pumps, low-viscosity fluid pumps, multiple flow pumps from Voith Turbo. Voith Turbo purchased H+L Hydraulik GmbH & Co. KG formerly known as Hartmann+Lämmle GmbH Co. KG, enhancing the Voith hydraulic component offerings with the VTHL (or VT H+L) hydraulics division to serve mobile hydraulics and industrial hydraulic customers.

Voith pumps are also used in many manufactured systems. Rather than pay the "upcharge" from the manufacturer, we can frequently provide you with the exact Voith replacement component you need for your equipment.

Voith internal gear pumps allow you to save space in your machine. The high rates of efficiency, thanks to gap compensation, allow efficient operation, and the optimized pressure progressions ensure low pump flow and pressure pulsations in your hydraulic system. This, combined with a compact force guide inside the Voith internal gear pump, reduces noise emissions so you can more easily meet the ever tightening workplace regulations on sound output.

Both the high-pressure and medium-pressure Voith IP pumps share similar design features, including radial compensation, axial compensation, internal gearing and plain bearings which ensure a smooth flow with minimal pulsation. IP pumps can be combined to create systems with multiple flows.

Internal gear rotation draws hydraulic oil or other pressure fluid into the area between the pinion gear and the internal gear. Radially, the gear chambers are closed by the gear teeth meshing. Pressure fluid is displaced when the tooth heads enter the gaps between gear teeth. The axial plates seal the pressure chamber with the minimal possible gap, reducing volume loss and increasing efficiency.

Voith IP pumps of the same or different sizes can be combined to form multiple-flow pumps. All sizes of Voith multi-flow pumps are available as two or three-flow pumps, and as four-flow pumps by custom order.

Directional control fast pilot valves make switching times possible, over 50% faster than direct-controlled valves. Switching time adjustment, stroke limiter and monitoring are available as options. Voith Turbo Hydraulics offers special equipment with standard directional control valves. Due to the compact building design with standing magnet (double solenoid coil with 4/3 valves) the valves can be integrated even in the smallest fitting spaces.

Voith Turbo hydraulic flow control valves are pressure compensated in the millisecond range, and changes in viscosity do not influence the flow rate.

Direct-controlled Voith Turbo pressure control valves are constructed in seat or piston design. The pressure control valve cartridges can be built directly into control blocks. Voith accumulator charging valves with constant switching limit and soft switching are particularly suitable for drive systems. Use memory load valves to design the installed drive power for the average need. All pressure control valves can be equipped with a gauge connecting valve.

The combination of structure and intermediate plate devices permits the realization of control units with many functions in a small space. The control paths and thus the oil columns are kept very short, a necessary condition for good dynamic behavior of the hydraulic control.

Pressure relief valves, type DBV, are capable of controlling and limiting the operating pressure and the flow rate in a hydraulic system. Independent of the set maximum operating pressure, the valve can switch to pressure-free circulation hydraulically, electromagnetically or via an external control oil connection.

The pressure relief valves DBV 50/60 switch the flow on and off depending on the pressure (hysteresis normally set to 10% of system pressure). To allow direct attachment to hydraulic pumps, and especially Voith IP pumps, the pressure relief valves are available with SAE flange connections in 4 sizes (10, 16, 25, 32 mm). The installation orientation can be freely selected.

VTHL electro-hydraulic amplifiers are numerically controlled precision drives. They consist of the set value input assembly, follow-up control valve and the actuator, which can be either a cylinder or a hydraulic motor. Actuator and follow-up control valve are linked by mechanical feedback. Electric low-power set value input combined with a hydraulic actuator result in high power density, low energy consumption, and high closed-loop gain. The electronic controls are coordinated with the special requirements of electro-hydraulic amplifiers. Interface modules make interfacing possible to all kinds of machine controls.

Voith Turbo has succeeded in integrating the well-established internal gear pumps, type IPM (medium pressure, up to 175 bar) and type IPV (high pressure, up to 330 bar) in an asynchronous electric motor. With that an electro-hydraulic unit is available which is very compact in design while also ensuring remarkable low noise emissions. Variable flow from fixed displacement pumps, electric motor - pump - aggregate (with frequency inverter)

The EPA/EPAF Voith internal gear pump or pump combinations generate pressure and volume flow. Asynchronous motor to drive the pump. Frequency inverter for controlling the speed of the motor. EPA/EPAF units can be created with all Voith internal gear pumps

The EPAF variable-speed motor pump unit with the internal gear pump which was specially developed for the delivery of low-viscosity media. Due to its renowned high efficiency, the IPME pump type is particularly suited as a delivery pump for the cooling lubricant circuit in machines with internally cooled tools. A pressure-dependent drive speed control allows cooling lubricant to be delivered as and when it is required. Pressures up to 100 bar can be generated.

VTHL hydraulic units guarantee your pressure supply. With Voith"s accumulator charging technique you generate exactly as much hydraulic energy as demanded by the process. The momentary available volume flow, dependent on the selected accumulator size, will be a multiple of the actually installed pump volume capacity.

With a wealth of knowledge & experience with Voith pumps, Tri-State Hydraulics can easily assist in the repair or replacement of any Voith pumps. Voith serves a number of different markets across the globe.

Tri-State Hydraulics carries an inventory of Voith pumps onsite and keeps every product in ready-to-ship condition. Tri-State also fully tests and sets each product to OEM specifications with our proven check system prior to shipping. Also included is Tri-State’s full suite of service including comprehensive reconditioning, full part replacement, expert support and a test facility. Contact us today at (847.439.8987) and we will quickly diagnose and repair your Voith pumps.

If you are looking for a different type of water pumps, such as a bors hoe water pumps, is an excellent choice for both large and high-pressure water pumps. As the name implies, it is a by-product of the two types of electricith pumps, which are both great and long-lasting. The pump is usually a hydraulic piston pump, with one or two piston hydraulic pumps.

They are usually made of a hydraulic piston. And the other type is the hydraulic piston pump. Xy water pumps are great for high-pressure applications, such as piston pumps, which are in a form of hydraulic piston pumps.

Voith Turbo hydraulicThe use of liquids to transmit force and energy. pumps / internal gear pumps - IPH, IPV, IPC and IPN - also as double pumps, multiple pumps or add-on pumps:

Are you looking for a dual flow or multiple flow pump, or a single internal gear pump by Voith? No problem, contact us and our team will help you as quickly as possible!