what is a double acting hydraulic pump pricelist

Enerpac C-604, Parker 3000 Series, Safeway S30 Series, Stucchi IVHP Series, Perfecting T Series, Snap Tite 76 Series, Dnp PVM Series, Faster PVVM Series

Push Button Stop/ Start, Lever Valve Action - Control lever forward: Pump into hose A, Returns to reservoir on hose B. Control lever neutral: Returns to reservoir on hose A and B. Control lever backward: Pump into hose B, Returns to reservoir on h

The ordering and shipping was easy. Showed up in just a few days. I bought this one because it says it’s rebuildable components. Hoping I don’t need that but it’s nice to have. I’m a little disappointed in the plastic coverings on the motor. Would like to have seen metal because it’s in a metal shop setting. The valve handle hits the pressure gauge in the far right hand position. Overall I think it’s going to serve it’s purpose well. I’m using it on a 20 ton shop press.

I ordered this approximately one month ago and received it within 5 days. Hook up to my project was easy and where I had a technical question I received a quick response from TEMCo. Owner"s / Operator"s manual could be considerably improved which is the reason I"ve not given more stars..

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

This hydraulic pump is a double-acting power unit for both lifting and lowering. It has a 20-quart sturdy metal reservoir and is designed with a 12V DC motor that can provide strong power for hydraulic systems like dump trailers, forklifts, lifting platforms, etc.

This double-acting hydraulic power unit has a 12V DC motor (Power:1.6-3.0kw) and a 20-quart metal reservoir; it has SAE#6 ports with 3200 PSI max relief setting on A and 1500 PSI on B port. Rated speed: 2850 r/min.

Our hydraulic electric pump has been fully assembled. It comes with a hand-held remote control and 2 additional SAE#6 connectors for replacement. The whole power unit is easy to wire and easy to operate.

With the powerful 12V DC electric motor, our hydraulic pump for dump trailers can start rapidly and provide quick oil output. In addition, it can provide strong power that will lift heavy objects in a short period.

You can rely on the quality of this electric hydraulic pump as it is made of special-treated sturdy metal, and the whole structure has been reinforced. It is also equipped with a powerful electric motor that you can use as often as you like.

All of our 12-volt hydraulic power units have been pre-assembled before delivery, and we provide instructions for operation so that you can install and use the hydraulic pump easily. Horizontal mount is recommended.

As a great power unit, this hydraulic pump can be used for many things, such as truck tailgate lift, RV leveling, scissor lift, dump trailers, lift truck, snowplow, aerial platform, road signs, material handling, wheelchair lifts, etc.

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

This hydraulic pump is a double-acting power unit for both lifting and lowering. It has a 15-quart sturdy metal reservoir and is designed with a 12V DC motor that can provide strong power for hydraulic systems like dump trailers, forklifts, lifting platforms, etc.

This double-acting hydraulic power unit has a 12V DC motor (Power:1.6-3.0kw) and a 15-quart metal reservoir; it has SAE#6 ports with 3200 PSI max relief setting on A and 1500 PSI on B port. The flow rate is 2GPM. Rated speed: 2850 r/min.

Our hydraulic electric pump has been fully assembled. It comes with a hand-held remote control and 2 additional SAE#6 connectors for replacement. The whole power unit is easy to wire and easy to operate.

With the powerful 12V DC electric motor, our hydraulic pump for dump trailers can start rapidly and provide quick oil output. In addition, it can provide strong power that will lift heavy objects in a short period.

You can rely on the quality of this electric hydraulic pump as it is made of special-treated sturdy metal, and the whole structure has been reinforced. It is also equipped with a powerful electric motor that you can use as often as you like.

All of our 12-volt hydraulic power units have been pre-assembled before delivery, and we provide instructions for operation so that you can install and use the hydraulic pump easily. Horizontal mount is recommended.

As a great power unit, this hydraulic pump can be used for many things, such as truck tailgate lift, RV leveling, scissor lift, dump trailers, lift truck, snowplow, aerial platform, road signs, material handling, wheelchair lifts, etc.

Our power units are some of the most reliable and durable units in the industry for use with dump trailers, dump trucks, RV"s, boat lifts, some liftgates, tow trucks, wreckers, car haulers, agriculture equipment, snow plow equipment and a variety of other applications that require a powerful and compact hydraulic pump. If considering this item for your liftgate, please call to verify compatibility.

Get the most with your hydraulic power unit by upgrading to ourDeluxe Kit. Select theDeluxe Kitoption to include a hydraulic hose and fittings kit with your purchase.

... two stage hydraulic hand pumps, easy to handle and use, with very high oil flow rates to operate a wide range of hydraulic cylinders or equipment.

... pneumohydraulic pumps that are compact and easy-to-use. It has a standard reservoir of 2.5L in plastic, and 5 or 10L in steel. The pump can be attached with a threaded G¼" fitting to ...

A compact lightweight pump, the Power Team 60 series is designed for rugged applications and low voltage starting. Experiencing a long, trouble-free life in the most demanding work environments, the 60 ...

... hand pumps come in a variety of configurations to meet the requirements of your application. Along with various oil capacities and flow rates, you can choose from the following options:

... lightweight and portable the Power Team PA6D series pumps are single-speed pumps for driving double-acting cylinders. The PA6D series pumps operate at ...

... : industrial tools, lifting systems, car repair, clamping systems, hydraulic equipment (presses, jacks, …), tire changers, bead breakers, automotive.

The HP-AP pump, like all HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. Our HP Series air-hydraulic ...

... this, PN pumps are extremely handy and stand out due to a very low effort on their handle. The practical pedal locking hook allows to use the lever as a handle during transport by holding it in the correct position in ...

... pneumohydraulic pump incorporates a double-acting pneumatic motor. The pump operates on compressed air with 2 to 7 bar pressure for construction of circuits that demand ...

... for use with either single or double acting cylinders and tools. The HP range offers the ideal solution for applications where completely independent, portable hydraulic power is required. ...

Double-acting, single-stage air-powered compact pump. Standard with a 3/8” NPT female thread and compressed air connector. Excluding coupler, hoses and pressure gauge.

the hydraulic single-port hand-pump range is tailored for use with Equalizer international hydraulic equipment. Certified for use in the hazardous areas ll 2 G ex h T5 GB llB, ll 2D ex ...

Air hydraulic pumps, working pressure 700 bar, using a pressure multiplicator. Recommanded solution to replace hand pumps. For single and double acting ...

With DirectIndustry you can: Find the product, subcontractor or service provider you need | Find a nearby distributor or reseller| Contact the manufacturer to get a quote or a price | Examine product characteristics and technical specifications for major brands | View PDF catalogues and other online documentation

air-driving action is the same as the Sprague air driven S-216-J series hydraulic pumps described on page 18. Being air driven, these double-acting pumps are non-arcing and non-sparking, safe for use in hazardous or confined areas.

Services oil and non-corrosive liquids. Not for water service. With a 6.8 pumping ratio, this double-acting pump is well suited for liquid transfer, low pressure hydrostatic testing and other industrial uses.

This pump discharges volume liquids up to 12 gallons per minute and provides for selected discharge pressures up to 680 psi. With its liquid body and main components made from anodized aluminum alloy, the pump is reduced in weight and lower in cost. The standard pump’s special seals in the wetted section are compatible with a wide range of chemicals while other seals in the pump are nitrile. Other seal compounds are optional.

Services oil, water and many corrosive liquids. With a 34 to 1 pumping ratio, this double-acting pump discharges volume liquids at any selected pressure up to 3,400 psi, suitable to many industrial applications requiring volume liquid delivery at higher pressures and holding cycles.

This pump uses an internal check valve in its liquid piston head, to obtain a double-acting, steady flow of liquid. This unique design results in higher pressures and uses material resistant to many corrosive liquids. The pump has special dynamic seals to accommodate low lubricity liquids. The pump body is brass.

Services oil and non-corrosive liquids. Not for water service. Its general design is identical to the S-216-JD-34 pump described above. The -36 pump has an aluminum body which significantly lowers the price of the pump and reduces its weight by four pounds. The pump has nitrile seals.

We have a wide selection of hydraulic hand pumps for sale at discount prices. These pumps are double acting, manually operated hydraulic pumps which can be used in a variety of applications.

Hydraulic power units having direct 12V (some at 24V) current are critically important in the industry of mobile hydraulics. These power units eliminate the need to connect hydraulic circuit to equipment engine. These units comprise interconnected components that work together to control hydraulic power. Basically, a hydraulic power unit is stand-alone piece of equipment that comprises of a motor, hydraulic pump, built-in control valve and oil reservoir. It uses hydraulic fluid for the transmission of power from oil tank to hydraulic cylinders. The hydraulic power unit can generate large energy output that you can use for operating hydraulic machines. They are also used in hydraulic applications that need a transmission, control, and distribution of energy through a medium of pressurized fluid such as dump trailers, lift gates, man lifts, snow plow trucks, construction equipment, transportation, and others. These units offer cost-efficiency, high power transmission, design flexibility, security, and reliability.

At Magister Hydraulics, we have hydraulic power units from the leading European and American manufacturers designed for heavy-duty hydraulic equipment and machines. You can find the following types of hydraulic power units at our online store:

We ensure to source all our products from recognized manufacturers and provide them to our clients at wholesale rates. Additionally, we provide special discounts on bulk purchases. Most products we have in stock come with a 1-year warranty to provide you best value for your investment. If you have any questions about hydraulic power units or need assistance, you can give us a call at 973-344-5313. Hide

•1 1/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25 amps at full load, starts at reduced voltage. CSA rated for intermittent duty.

•“Assemble to Order” System: There are times when a custom pump is required. Power Team’s “Assemble to Order” system allows you to choose from a wide range of pre-engineered, off-the shelf components to build a customized pump to fit specific requirements. By selecting standard components you get a “customized” pump without “customized” prices. All pumps come fully assembled, add oil and ready for work.

From inflatable jacks, hydraulic pumps, cylinders and valves to clamping components and hydraulic accessories, Power Team brand high-force tools and equipment are used wherever strong, concentrated force is required ― on construction sites, in power plants, on rail lines, in shipyards, in mining operations and more.

Located in the United States in Rockford, Illinois, the Power Team brand is marketed by SPX FLOW Inc. in 155 countries. Global sales and manufacturing offices are located in the United Kingdom; the Netherlands; Shanghai and Suzhou, China; and Singapore. The Power Team brand is sold through a worldwide network of stocking industrial distributors. Service is available throughout the world at authorized Power Team Hydraulic Service Centers.

SPX FLOW Inc. maintains high-quality standards in all phases of design, procurement, manufacturing, sales and service of Power Team brand solutions. We are committed to continuous quality improvement, customer satisfaction and the reduction of total costs, and regularly employ innovation, efficiency and in-depth multi-industry knowledge to meet our customers’ specific needs.

Originating in the early days of the automotive industry, the Power Team brand started out as Owatonna Tool Company, known as OTC. With the invention and growing popularity of the automobile, hand tool makers and other businesses began recognizing a need for tools to service this new mode of transportation and OTC was one of those companies. Learn more about our Power Team Time-Line.

Power Team is a product brand of SPX FLOW Inc., a global, Fortune 500, multi-industry company based in the United States in Charlotte, North Carolina. The company maintains operations in more than 35 countries, bringing to market solutions that benefit society while delivering value-added, bottom-line results to customers across five broad-based categories: power and energy, vehicle and transit, infrastructure, food and beverage and industrial processes. SPX FLOW Inc. is traded on the New York Stock Exchange.

Hydraulic cylinders are an essential component in many industries, including most of Australia’s critical sectors. Hydraulic cylinders and rams all provide the power a hydraulic system needs to function, but within the category of ‘hydraulic cylinders’, there are a few key types to understand.

The major way of dividing hydraulic cylinders is between ‘single acting cylinders’ and ‘double acting cylinders’. While fairly similar in function, there are differences between single and double acting hydraulic cylinders, meaning they aren’t interchangeable.

The main difference between single and double acting hydraulic cylinders is that a double acting hydraulic cylinder uses hydraulic pressure to move a piston in two directions, while a single acting hydraulic cylinder relies on a spring or gravity to return to its original position.

To help outline the differences in these fairly similar hydraulic systems, we have produced this handy guide. This article outlines the key differences between single and double acting hydraulic cylinders, and when is the best time to use each one.

Whether you’re choosing the right hydraulics components or need to repair hydraulic cylinders, you’ll need to know what type of cylinder or ram you’re working with. That’s why we’ve also covered how to identify single vs double acting cylinders and whether you can convert them.

A single acting hydraulic cylinder is a hydraulic cylinder in which the fluid acts only on one side of the piston. It relies on the springs, gravity, load, other cylinders, or separate reservoirs to push the piston back into the opposite direction.

The fluid used a type of oil (usually mineral oil), which allows the fluid to push a load without being compressed back down by the weight. This type of hydraulic cylinder is best for straightforward applications, where the goal is to have something move in one direction.

Push Type Hydraulic Cylinder– Fluid enters to push the piston out of the cylinder. This is also referred to as a hydraulic cylinder with a ‘sprung in’ position, where the piston is fully retracted at rest.

Pull Type Hydraulic Cylinder– Fluid enters to pull the piston inside the cylinder. This is also referred to as a hydraulic cylinder with a ‘sprung out’ position, where the piston rod is fully extended at rest.

In a single acting hydraulic cylinder, a plunger extends when the cylinder is pumped full of pressurised fluid. When it is retracted, the plunger can retract using a return spring, by the load or gravity.

Single acting hydraulic cylinders have only one port, where pressurised fluid enters. These are fitted with either a spring, or a load. When the fluid is compressed, it enters through the single port which forces the piston to extend in one direction, consequently compressing the spring. The spring then retracts the piston back into its previous position after releasing the fluid from through the same port it originally flowed from.

The typical applications of single acting hydraulic cylinders are simple lifting jobs, light industrial and commercial applications, and any other application where fast and consistent retraction is not essential.

Clamp– Through this application, a workpiece can be held in position by jaws that are operated by the cylinder. A process such as drilling can then be done, before the spring retracts the jaws.

Position And Line Up Objects – Through this application, a workpiece or product is either pulled or pushed into place, or into a specific machine such as a conveyor belt, before the spring acts and prepares the hydraulic cylinder for the next workpiece.

Punch Or Mark Objects– In this application, thrust from a single acting hydraulic cylinder is used to either punch or mark an object. The spring then retracts the punch, ready for the next object.

Keep in mind that double acting hydraulic cylinders are able to do all of the above, albeit without the cost savings of a single acting hydraulic cylinder. When it comes to hydraulic cylinder parts, single-acting cylinders are simpler and therefore cheaper to purchase.

Lower cost– The initial cost of single acting hydraulic cylinders is much lower than double acting ones. This makes it ideal for situations where a double acting hydraulic cylinder may be too much, and a single acting hydraulic cylinder will work fine. In addition, its single port and small housing leads to reduced valve and hose cost compared to double acting cylinders.

Easier maintenance – Since force is only applied to one direction, there are fewer areas or segments which have to be maintained. Single acting hydraulic cylinders are easier to maintain and repair, especially if you know how to maintain hydraulic cylinders.

Safety benefits– Single-acting hydraulic cylinders have a specific rest state, which can be easily identified in the event of a power outage. Knowing the cylinder’s resting state will prevent surprise and injury once power is restored, if the cylinder is halfway through an operating cycle.

International Standards –Compared to double acting hydraulic cylinders, there aren’t many single acting hydraulic cylinders that are compliant with ISO standards.

A double acting hydraulic cylinder is a hydraulic cylinder in which the fluid alternately acts on both sides of its piston. It has a port on each end, filled with hydraulic fluid for the pistons’ retraction and extension.

This type of hydraulic cylinder is ideal for applications that require fast and predictable retractions, or applications where consistent accuracy is necessary.

In a double acting hydraulic cylinder, the plunger retracts when the hydraulic fluid, which has now been pressurised, is injected into the top port, which forces the plunger back to its original position. It is possible for this process to be done either very quickly, or very gradually with precise control.

Double acting hydraulic cylinders have two ports where pressurised fluid can flow in and out. Fluid flows through one port, which moves the piston forward, which then applies pressurised fluid into the second port which then retracts the piston back into the cylinder.

The standard applications for double acting hydraulic cylinders are those that require repetitive presses and situations that require both pushing and pulling forces. Elevators and forklifts are good examples of double acting cylinder applications.

Double acting hydraulic cylinders can do anything a single acting cylinder can. However, these are especially good for industrial and robotics industries, tasks such as opening and closing doors, and lifting and moving merchandise off conveyor belts. Other uses include medical applications, earthmoving and construction equipment, and even in space programs.

Complexity– Double acting hydraulic cylinders are built slightly different to their single acting counterparts. The parts of a double acting cylinder are more complex. They generally have more pistons, and more seals to accommodate the flow of fluid on both ends for a push and pull control.

Costly– Double acting cylinders are much more expensive than their single acting counterparts. They require larger housing, for example, if it’s used as a feed cylinder and requires coupling with another machine system. Because the system is larger, fluid is often consumed at a faster rate than in single acting hydraulic cylinders.

Single and double acting hydraulic cylinders both serve similar functions, with the double acting hydraulic cylinder being able to do any job a single acting cylinder can, at the cost of being more expensive and requiring more dedicated maintenance.

Single acting hydraulic cylinders are simple, inexpensive, have one job they can do and do it well. These cylinders are exceptionally useful in fabrication, where one repetitive movement is required, such as on a factory line. Manufacturing hydraulics systems strongly rely on low-cost single acting cylinders.

Double acting hydraulic cylinders, in comparison, are far more sophisticated and powerful. Not only can a double acting cylinder perform any job a single acting hydraulic cylinder could, but by having the piston pressured to move in two opposing directions, it’s essential to the way modern pneumatic machinery works today. Things like elevators and forklifts could not exist without double acting hydraulic cylinders.

If an application only needs motion in one direction, a single acting hydraulic cylinder is the safest and most economical choice. However, any situation requiring greater control and power requires a double acting hydraulic cylinder, and the ISO standards compliance associated with them.

A hydraulic hand pump is a simple, yet essential piece of equipment used in a variety of industries. They are vital for many force applications – especially in construction, manufacturing, and maintenance operations.

However, with so many different models on the market, it can be difficult to know which is best suited to your type of work. This guide will help you understand the different pump types and their features.

Before you go ahead and buy a hydraulic hand pump, it’s important to do your research and understand their differences. With so many to choose from, you will want to compare features and prices. It is also a good idea to assess the quality of the product and if it’s made by a reputable manufacturer.

A hydraulic hand pump does a simple job, which is to deliver pressurized hydraulic flow to a tool and then return it back to the pump reservoir. But that doesn’t mean you should take shortcuts and opt for the first one that appears in your internet search results. There are a few simple but important considerations to take on board that will steer you towards the right product.

When you are choosing a hydraulic hand pump, it is important to prioritize quality over price. A high-quality Enerpac pump will last longer and be more reliable than a cheaper model. You will save money in the long run as you won’t need to replace it for many years.

With each stroke of the handle on a single-speed hydraulic pump, hydraulic oil is drawn from the pump reservoir towards the tool by the same amount. For many applications, this simpler and lower-cost option is fine. But for projects needing greater flow, for example when oil is to be pumped to a large hydraulic cylinder (or multiple cylinders), a single-speed pump can be hard work.

The alternative is a 2 stage hydraulic pump (2 speed), which has the added advantage of delivering high flow at lower working pressures. This gets you faster to the point where the real work begins. It then automatically delivers low flow at high pressure just at the time when you need more control. Compared to a single-speed pump, some two-speed types can reduce the number of handle strokes by as much as 78%! For a more in-depth comparison read our other blog post.

Hydraulic hand pumps are available in a wide range of oil capacities. A small model typically has a usable capacity of around 20 in3 (327 cm3), but there are some with as much as 453 in3 (7423 cm3). A larger reservoir will give you more options but will obviously make the pump much heavier, so think about how much oil is really needed for the applications you intend to carry out.

Most Enerpac Hydraulic Hand Pumps can withstand pressures up to 10,000 psi (700 bar), but this isn’t always necessary. For lower working pressures up to 5,000 psi (350 bar) the P18 is a cost-effective single-speed option. However, if you need a 2 stage hydraulic pump go for the P1425000.

When it comes to the materials used for the main body of the pump, you have the choice of steel or glass-filled nylon. There’s plenty of configurations available in both types, so it really comes down to your personal preferences, weight, and the working environment. Metal-bodied pumps are the traditional tried and tested option that offer reassurance to many people. However, glass-filled nylon reservoirs are also incredibly durable, and these offer an unrivalled combination of strength, weight, and resistance to corrosion. A glass-filled nylon pump will be a few pounds lighter than steel equivalents.

A double-acting cylinder gives you a faster and more controlled plunger retraction, but you will need a pump designed specifically for this purpose. Take a look at the P842, P84, and P464 models.

Safety should always be the number one concern, so choosing a good quality pump from a reputable manufacturer is an essential first step. Some features and tips relating to safety include;

When working in extreme environments such as the oil & gas, or petrochemical industries, a hydraulic pump may be exposed to corrosive substances and extreme temperatures. For these situations consider pumps with corrosion-resistant materials such as stainless steel, nickel-plated valves and cylinders, anodization, and plastic-encapsulated metals. Viton® Seals will also offer heat and chemical resistance.

Would a foot pump suit you better? If crouching to activate your hand pump is an issue, or if you want to keep your hands free then a foot pump could be a good alternative option. Look at the P392FP which is a 2 stage foot pump with a robust steel frame.

For ad-hoc projects, a hand pump is likely to be the right choice. But for frequent and repetitive projects – and especially those with multiple cylinders a powered pump could be much better for you. Plug in electric and compressed air hydraulic pumps are common. For remote locations without mains power or a compressed airline the choices are battery and gasoline-driven pumps.

If your work involves using hydraulic cylinders buying a cylinder and pump set is a quick and easy way to get what you need, without the hassle of buying components separately. A set typically includes a single-acting hydraulic cylinder (aka a jack or ram), a two-speed pump, a 6-foot hose, calibrated gauge, and a gauge adaptor. Cylinder capacities vary from 5 to 100 tons and the pump options include hand or foot-operated models.

You can locate your nearest Enerpac distributor on our website. Or if you are based in the United States you can order your pump online directly from Enerpac.

Most people reading this article will be technical-minded engineers with a clear idea of the intended applications. With these projects in mind and an understanding of the key points we’ve covered above, hopefully, you will be in a good position to select the best hydraulic hand pump for your future projects. Here is a summary of the key considerations:

As “Hydro-Pack LTD.” we use cookies in order to make the most of our website. We take your privacy seriously and are committed to protecting your personal information. If you do not want to use cookies, you can delete or block these cookies in your browser’s privacy and security settings anytime. Blocking cookies may affect the operation of some site functions.

When deciding to purchase telescopic hydraulic cylinders, buyers are often tasked with choosing between single-acting and double-acting hydraulic cylinders. Learn what differentiates the two telescopic cylinder types to see which cylinder is best for your high-power hydraulic needs.

Offering a simple cylinder design with easy maintenance, single-acting hydraulic cylinders extend by relying on pressure from one side of the piston. The cylinders retract via gravity or weight of the load.

Double-acting cylinders provide more versatility than single-acting cylinders. Single-acting hydraulic cylinders have fluid pressure applied on one side of the piston, whereas double-acting cylinders have hydraulic fluid applied to both sides of the piston.

Know what you need? Check out our replacement telescopic hydraulic cylinders. We stock a wide selection of cylinders, well-suited for a variety of mobile equipment types and functions. We also manufacture custom telescopic cylinders built to spec.