wholesale hydraulic pump hpv102 quotes factory

Avoid any downtime at your construction site with the range of hpv102 from Alibaba.com. You can check out the fully-stocked parts at Alibaba by manufacturer and model and affordable wholesale prices. The wholesale hpv102 collection of spare parts from China’s wholesaler, Alibaba, fits well with a wide range of heavy-duty equipment, from bulldozers, excavators, and hammers, among others. Plus, you can find parts for your tractors, skid steer loaders, wheel loaders, backhoe loaders, and crawler dozers.

If you have a limited cash allocation, the used or remodeled parts will go a long way in accommodating your budget. Alibaba’s hpv102 and tools make it easy to replace, modify and enhance your equipment for their optimal performance. For electrical and mechanical applications, you can find your match at Alibaba.com for everything you need to make your vehicle perform better. Get engine oils, batteries, hydraulic parts, transmissions, injectors, hoses, and starters from the hpv102 at Alibaba.com.

The new parts from manufacturers have warranties, and you can buy them by matching the part numbers. Such parts, including hoses, plugs, or filters, will help you quickly deal with downtime on site. The used parts, on the other hand, sell for a lower price. Remember, Alibaba partners with sellers who have certificates of operation. So, you can use these second-hand hpv102 to get your heavy machine running. You can also get rebuild models from the collection at Alibaba.com. These are sustainable choices that use recycled materials and perform as well as the new parts. And depending on your seller of choice, you might get a warranty to accompany them.

ZX200-1 HPV102 main pump is specially designed for sand moulding plants in petroleum drilling, metallurgy, chemical industry, shipbuilding, construction and other industries. Its high efficiency and low noise make it widely adaptable to meet the different requirements of customers. It is widely used in flooded systems with water as antifreeze.

Z200-1 HPV102 main pump is a metering rotary vane pump, which is characterized by the use of direct drive roller bearings, which can ensure continuous operation under any conditions. In addition to high pumping capacity, HPV102 is extremely durable and suitable for a variety of applications in many different industries.

The new Z200-1 main pump features a corrosion-resistant design for longer service life and higher compressive strength. During manufacturing, its wear resistance and fracture toughness have also improved. All of this results in more reliable products, less downtime and less maintenance.

The X-200 series main pump is a centrifugal pump. They are used in high lift and high flow applications up to 4500 cubic meters per minute (183 cubic meters per hour).

The X200-1 is a compact counter-rotating twin-screw pump with a quick-opening mechanical seal design. It is available in 1" or 2" bore, with a maximum pressure of 1000 bar (15,000 psi) and is rated ABOO/AOO to ANSI Class 150,035.

Our products comply with all national requirements including PSH-2010, GB standard and others. Our products are widely used in water supply projects such as purification, desalination, pumping stations and chemical industry.

XZ200-1 is an external drive centrifugal pump. For circulation, can be run directly when shipped; simple connections are pre-assembled and can be directly connected to the motor. Due to its proven mechanical design, the XZ200-1 operates at high pressure without the risk of leakage or corrosion and is suitable for use even at temperatures up to 200°C.

The ZX200-1 is a small and compact pump ideal for medium flow in process technology. ZX200-1 can also be used as booster pump or drive pump. It is specially designed for handling organic solvents and chloride solutions (including chlorinated hydrocarbons) in the food or chemical industry.

The Z00-1 main pump is one of the most popular and best-selling main pump products on the market. It can be applied on off-highway and on-highway, and customers can choose diving or external buoys; with special structural design, the synchronous structure can be improved, the service life can be prolonged, the noise can be reduced, and you can get a better purchasing experience!

ZX200-1 is a main pump that can be used in the food and beverage industry. The pump is made of stainless and carbon steel, saving not only cost but also time. This means that after-sales service can be provided quickly and efficiently.

With our 20+ years of experience, we have mastered the technology to manufacture pumps according to your requirements. We don"t just focus on ticking, we work with you to understand your needs and provide solutions.

ZX200 consists of XPU (main pump), ZX1 and ZXN1 (packaging pump). It has the characteristics of high efficiency and energy saving, and is widely used in domestic water supply, industrial water supply and fire water supply. This product has passed CE certification.

Whether we have your unit in stock or not, repair is always an option. In fact, it may be your BEST option for obsolete and hard to find hydraulic pumps and motors. Letting us repair your unit can also be drastically cheaper than replacing it, especially if parts are hard to come by.

These pumps are usually called ram pumps, but they also sometimes go by other names; hydraulic hand pumps, for example, are never referred to as ram pumps, though both machines" principle of operation is similar. Ram pumps are increasingly popular in the developing world because they can be used, without the use of fuel or electricity, to pump water from rivers, streams or other sources to places where it is needed.

Because fuel and electricity can be scarce or expensive in many parts of the developing world, ram pumps are a very attractive water pumping solution. The other main category involves hydraulic pumps that make use of auxiliary power sources. These pumps are often used for the transmission of hydraulic fluids in machinery as well as in some other uses, such as in pressure washers.

The first category of hydraulic pumps harnesses natural forces and the kinetic energy of the fluids involved in pumping. In a ram pump for example, an inlet pipe on slight decline directs water away from its source and into the pump reservoir. As the water flows into the reservoir, the force of gravity and the water"s kinetic energy cause pressure to build up. When sufficient pressure is built, a valve above the reservoir opens, which allows for the pressurized water to flow out into a pressure chamber.

The water in this chamber becomes further pressurized, which eventually forces it out of the chamber and into a tube that ultimately directs the water to its final destination. Relief valves and pressurized air are also involved in this process in order to avoid bursting pipes or ruptures in the pumps" reservoirs. The second category involves drawing hydraulic fluids like oil out of a reservoir and into a hydraulic system. This process usually involves cylinders and a series of tubes through which the fluid travels and is subject to varying levels of pressure.

Hydraulic systems are in general members of the fluid power branch of power transmission. Hydraulic pumps are also members of the hydraulic power pack/hydraulic power unit family. Hydraulic units are encased mechanical systems that use liquids for hydraulics.

The hydraulic systems that hydraulic pumps support exist in a range of industries, among them agriculture, automotive manufacturing, defense contracting, excavation, and industrial manufacturing. Within these industries, machines and applications that rely on hydraulic pumps include airplane flaps, elevators, cranes, automotive lifts, shock absorbers, automotive brakes, garage jacks, off-highway equipment, log splitters, offshore equipment, hydraulic motors/hydraulic pump motors, and a wide range of other hydraulic equipment.

When designing hydraulic pumps, manufacturers have many options from which to choose in terms of material composition. Most commonly, they make the body of the pump–the gears, pistons, and hydraulic cylinders–from a durable metal material. This metal is one that that can hold up against the erosive and potentially corrosive properties of hydraulic fluids, as well as the wear that comes along with continual pumping. Metals like this include, among others, steel, stainless steel, and aluminum.

First, what are operating specifications of their customer? They must make sure that the pump they design matches customer requirements in terms of capabilities. These capabilities include maximum fluid flow, minimum and maximum operating pressure, horsepower, and operating speeds. Also, based on application specifications, some suppliers may choose to include discharge sensors or another means of monitoring the wellbeing of their hydraulic system.

Next, what is the nature of the space in which the pump will work? Based on the answer to this question, manufacturers will design the pump with a specific weight, rod extension capability, diameter, length, and power source.

Manufacturers must also find out what type of substance does the customer plan on running through the pumps. If the application calls for it, manufacturers can recommend operators add other substances to them in order to decrease the corrosive nature of certain hydraulic fluids. Examples of such fluids include esters, butanol, pump oils, glycols, water, or corrosive inhibitors. These substances differ in operating temperature, flash point, and viscosity, so they must be chosen with care.

All hydraulic pumps are composed in the same basic way. First, they have a reservoir, which is the section of the pump that houses stationary fluid. Next, they use hydraulic hoses or tubes to transfer this fluid into the hydraulic cylinder, which is the main body of the hydraulic system. Inside the cylinder, or cylinders, are two hydraulic valves and one or more pistons or gear systems. One valve is located at each end; they are called the intake check/inlet valve and the discharge check/outlet valve, respectively.

Hydraulic pumps operate under the principle of Pascal’s Law, which states the increase in pressure at one point of an enclosed liquid in equilibrium is equally transferred to all other points of said liquid.

To start, the check valve is closed, making it a normally closed (NC) valve. When the check is closed, fluid pressure builds. The piston forces the valves open and closes repeatedly at variable speeds, increasing pressure in the cylinder until it builds up enough to force the fluid through the discharge valve. In this way, the pump delivers sufficient force and energy to the attached equipment or machinery to move the target load.

When the fluid becomes pressurized enough, the piston withdraws long enough to allow the open check valve to create a vacuum that pulls in hydraulic fluid from the reservoir. From the reservoir, the pressurized fluid moves into the cylinder through the inlet. Inside the cylinder, the fluid picks up more force, which it carries over into the hydraulic system, where it is released through the outlet.

Piston pumps create positive displacement and build pressure using pistons. Piston pumps may be further divided into radial piston pumps and axial piston pumps.

Radial pumps are mostly used to power relatively small flows and very high-pressure applications. They use pistons arranged around a floating center shaft or ring, which can be moved by a control lever, causing eccentricity and the potential for both inward and outward movement.

Axial pumps, on the other hand, only allow linear motion. Despite this, they are very popular, being easier and less expensive to produce, as well as more compact in design.

Gear pumps, or hydraulic gear pumps, create pressure not with pistons but with the interlocking of gear teeth. When teeth are meshed together, fluid has to travel around the outside of the gears, where pressure builds.

External gear pumps facilitate flow by enlisting two identical gears that rotate against each other. As liquid flows in, it is trapped by the teeth and forced around them. It sits, stuck in the cavities between the teeth and the casing, until it is so pressurized by the meshing of the gears that it is forced to the outlet port.

Internal gear pumps, on the other hand, use bi-rotational gears. To begin the pressurizing process, gear pumps first pull in liquid via a suction port between the teeth of the exterior gear, called the rotor, and the teeth of the interior gear, called the idler. From here, liquid travels between the teeth, where they are divided within them. The teeth continue to rotate and mesh, both creating locked pockets of liquid and forming a seal between the suction port and the discharge port. Liquid is discharged and power is transported once the pump head is flooded. Internal gears are quite versatile, usable with a wide variety of fluids, not only including fuel oils and solvents, but also thick liquids like chocolate, asphalt, and adhesives.

Various other types of hydraulic pumps include rotary vane pumps, centrifugal pumps, electric hydraulic pumps, hydraulic clutch pumps, hydraulic plunger pumps, hydraulic water pumps, hydraulic ram pumps, portable 12V hydraulic pumps, hydraulic hand pumps, and air hydraulic pumps.

Rotary vane pumps are fairly high efficiency pumps, though they are not considered high pressure pumps. Vane pumps, which are a type of positive-displacement pump, apply constant but adjustable pressure.

Centrifugal pumps use hydrodynamic energy to move fluids. They feature a rotating axis, an impeller, and a casing or diffuser. Most often, operators use them for applications such as petroleum pumping, sewage, petrochemical pumping, and water turbine functioning.

Electric hydraulic pumps are hydraulic pumps powered by an electric motor. Usually, the hydraulic pump and motor work by turning mechanisms like impellers in order to create pressure differentials, which in turn generate fluid movement. Nearly any type of hydraulic pump can be run with electricity. Most often, operators use them with industrial machinery.

Hydraulic clutch pumps help users engage and disengage vehicle clutch systems. They do so by applying the right pressure for coupling or decoupling shafts in the clutch system. Coupled shafts allow drivers to accelerate, while decoupled shafts allow drivers to decelerate or shift gears.

Hydraulic ram pumps are a type of hydraulic pump designed to harness hydropower, or the power of water, to elevate it. Featuring only two moving hydraulic parts, hydraulic ram pumps require only the momentum of water to work. Operators use hydraulic ram pumps to move water in industries like manufacturing, waste management and sewage, engineering, plumbing, and agriculture. While hydraulic ram pumps return only about 10% of the water they receive, they are widely used in developing countries because they do not require fuel or electricity.

Hydraulic water pumps are any hydraulic pumps used to transfer water. Usually, hydraulic water pumps only require a little bit of energy in the beginning, as the movement and weight of water generate a large amount of usable pressure.

Air hydraulic pumps are hydraulic pumps powered by air compressors. In essence, these energy efficient pumps work by converting air pressure into hydraulic pressure.

Hydraulic pumps are useful for many reasons. First, they are simple. Simple machines are always an advantage because they are less likely to break and easier to repair if they do. Second, because fluid is easy to compress and so quick to create pressure force, hydraulic pumps are very efficient. Next, hydraulic pumps are compact, which means they are easy to fit into small and oddly shaped spaces. This is especially true in comparison to mechanical pumps and electrical pumps, which manufacturers cannot design so compactly. Speaking of design, another asset of hydraulic pumps is their customizability. Manufacturers can modify them easily. Likewise, hydraulic pumps are very versatile, not only because they are customizable, but also because they can work in places where other types of pump systems can’t, such as in the ocean. Furthermore, hydraulic pumps can produce far more power than similarly sized electrical pumps. Finally, these very durable hydraulic components are much less likely to explode than some other types of components.

To make sure that your hydraulic pumps stay useful for a long time, you need to treat them with care. Care includes checking them on a regular basis for problems like insufficient fluid pressure, leaks, and wear and tear. You can use diagnostic technology like discharge sensors to help you with detect failures and measure discharge pressure. Checking vibration signals alone is often not enough.

To keep yourself and your workers safe, you need to always take the proper precautions when operating or performing maintenance and repairs on your hydraulic pumps. For example, you should never make direct contact with hydraulic fluid. For one, the fluid made be corrosive and dangerous to your skin. For two, even if the pump isn’t active at that moment, the fluid can still be pressurized and may potentially harm you if something goes wrong. For more tips on hydraulic pump care and operation, talk to both your supplier and OSHA (Occupational Safety and Health Administration).

Pumps that meet operating standards are the foundation of safe and effective operations, no matter the application. Find out what operating standards your hydraulic pumps should meet by talking to your industry leaders.

The highest quality hydraulic pumps come from the highest quality hydraulic pump manufacturers. Finding the highest quality hydraulic pump manufacturers can be hard, which is why we have we listed out some of our favorites on this page. All of those whom we have listed come highly recommended with years of experience. Find their information nestled in between these information paragraphs.

Once you have put together you list, get to browsing. Pick out three or four hydraulic pump supply companies to which you’d like to speak, then reach out to each of them. After you’ve spoken with representatives from each company, decide which one will best serve you, and get started on your project.

Whether we have your unit in stock or not, repair is always an option. In fact, it may be your BEST option for obsolete and hard to find hydraulic pumps and motors. Letting us repair your unit can also be drastically cheaper than replacing it, especially if parts are hard to come by.

VOE17468429 Hydraulic pump Volvo.Heavy parts A35F, A35F FS, A35F/G, A35F/G FS, A40F, A40F FS, A40F/G, A40F/G FSOilmax offers replacement spare parts for Volvo excavators, wheel loaders, articulated haulers, skid steer loaders, compact track loaders.Parts covered: solenoids, fuel pumps, starters, alternators, water pumps, radiators, injectors, injection pumps, hydraulic parts, joysticks, turbos, cylinder head gaskets, belts, filters, sensors, etc.Please send an inquiry to get more part details. If you don"t find the parts you want, please contact us.

A hydraulic valve is a mechanical device that regulates the flow of the hydraulic fluid in a hydraulic system. Hydraulic systems are typically high pressure systems, ranging from 200 Bar averaging 700 Bar upwards...