wireless remote for hydraulic pump in stock

Many customers are installing this remote control on their hydraulic pump to operate their dump trailers, trailer jacks, boat lifts, snow plows and many more!

This system is also engineered so you can continue to use the tethered (wired) remote that came with your hydraulic pump. Although, after you use the wireless controller we bet you never use the tethered (wired) remote again!

Looking for a commercial heavy duty wireless system? Look no further than this Lodar wireless remote for 12 or 24 volt hydraulic pumps. Wireless range of up to 150 feet (45 meters) Waterproof rating of a IP67.

Remote: has 60 + hours of use and included overload and reverse polarity protection. Has LED readout to show you power status, defaults, and output use. Works great on all PJ Trailers KTI power up and power down hydraulic pumps. Comes with receiver box, two button key fob, and instructions.

Looking for a commercial heavy duty wireless system? Look no further than this Lodar 4 function wireless remote for 12 or 24 volt hydraulic pump and winch, with 2 functions per unit. Wireless range of up to 150 feet (45 meters) Waterproof rating of a IP65.

Remote: has 60 + hours of use and included overload and reverse polarity protection. Has LED readout to show you power status, defaults, and output use. Designed to be used on PJ Trailers KTI 2 function hydraulic pump, and 2 function winch, although it can be used in many applications.

Cut the cords and go wireless! This unit will work with KTI hydraulic pumps January 2015 and newer. Receiver has a built-in safety that shuts down after being idle for 20 minutes.

This Bluetooth Wireless Remote for your KTI Hydraulic Pump Circuit adds convenience and ease to your everyday tasks. The wireless remote works with any trailer built after January 2015. The remote range includes about 40 feet with no obstructions. The receiver has a built-in shut-off feature when idle for 20 minutes.

The receiver has the ability to program up to 4 key fobs to one receiver. Includes an inline 15 amp fuse on the power wire for protection. 5/16″ eyes are included on power and ground wires to ease installation to a battery. Receive power and ground wire lengths are 24 inches. The 2-button receptacle connector wire length is 14 inches. The 2-button power unit connector wire is 32 inches. The detachable antenna has a 38″ wire.

The product is made with low amp wire while the stock dump is fused for 20 amp. The key fob controller is cheaply made. I have to take it apart often to get the buttons to work. It is plug and play making installation easy, but it doesn"t have the third circuit for gravity down. After the purchase and installation I found a nicer unit with two controls for 1/3 of the price at surplus center.

Kar-Tech’s wireless remote control system offers an affordable way to quickly and easily control your hydraulic pump from a distance. Control your on/off outputs from a distance of up to 300 feet away from the receiver.

Cross-talk and interference are virtually eliminated with the 900MHz FHSS platform using ID-coded transmission. Manufactured & Designed in the USA, Kar-Tech offers world-leading hydraulic remote technology compatible with each of our single and double-acting 12V hydraulic pumps.