zi beta series hydraulic pump manufacturer

07319075501, ZI Fluid Power, Beta Series, Hydraulic Gear Pump With Priority Flow. ZI BETA SERIES HYDRAULIC GEAR PUMP WITH PRIORITY FLOW CONTROL ZI BETA SERIES Hydraulic Gear Pump With Integral Priority Flow Control Valve 2 Bolt 3 1/4" Pilot 5/8" Keyed Shaft CW Rotation 1.58 cu in3/rev Priority Flow Control Output 4 GPM @ 1500psi #14 ODT Input Port #8 ODT Outlet Priority Flow Port #10 ODT Outlet

Condition: New, Hydraulic Pump Type: Gear, Modified Item: No, Country/Region of Manufacture: Unknown, Custom Bundle: No, Inlet Port Diameter: 7/8", Non-Domestic Product: No, Rated Pressure: 3600 psi (250 bar), MPN: 07319075501, Brand: ZI, Outlet Port Diameter: 5/8"

Commercial Intertech was an International manufacturer comprised of three business groups – Commercial Hydraulics, Astron Building Systems, and Commercial Metal Forming. They were founded in 1920 and headquartered in Youngstown, Ohio. Prior to their acquisition in 2000 the company operated 27 facilities in seven countries and employed nearly 4000 people. January 17, 2000 – Parker Hannifin Corporation announced they would merge with Commercial Intertech. After the merger was complete the brand positioned its branding as Parker-Commercial Intertech.

Hydraulic.net offers replacement pumps for one of the series from Commercial Intertech. The Alpha Series. The Alpha series gear pumps from Commercial Intertech were developed as an advanced-performance version of the international “bushing block” style pumps. The Alpha series was known for their superior performance, low noise when operating at high pressures, and very efficient. The Alpha series was produced in four frame sizes (P3, P5, P11, and P17) with displacements ranging from 0.8 to 52 cm3/rev. (.048 to 3.17 in3/rev.)

Hydraulic.net has over 30 years of experience in working with OEMs directly as well as distributors, repair shops, and end users. When you need a hard to find pump which are often no longer being produced by any other manufactures; Hydraulic.net is your source. We provide gear pump solutions, made to order. Based on trends and the demand of the market we strive to maintain inventory to allow us to get your replacement pump to you fast. Built in the United States. Our facility is in North East Florida. We are proud of our experience, knowledge, and commitment to quality. We serve customers across the US, Canada, Mexico, and Internationally.

To confirm and cross-reference the pump you need we will need to confirm the Commercial Intertech model number or serial number from your hydraulic gear pump. In many cases, we can offer a replacement pump aligned with the original pump specifications.

Our customer service is available Monday through Friday, 8:30 AM to 5:00 PM Eastern Standard Time. Call one of our Hydraulic Experts today to find your replacement pump from Hydraulic.net. With over 30 years of experience in working with OEMs and Distributors, we have the expertise and knowledge to provide you with a replacement pump that will meet your needs.

"Epic — the perfect pair of pants! The pants not only survived 15 hours and 10 miles of walking during a busy saturday in New York City, but they looked amazing all day." - Katy G.

The company offershydraulic metering pumps for the pressure range up to 64 bar. The liquid ends are equipped with a multi-layer metering diaphragm capable of signaling diaphragm failure. As a particular safety feature, this pump series is equipped as standard with a finely adjusted pressure relief valve integrated in the hydraulic system. Both technical and economical advantages have been gained by combining the hydraulic unit and gear unit in one housing. The stroke volume can be varied hydraulically by means of a tubular piston, resulting in a very good price/performance ratio.

The standard delivery capacity ratings are covered by two model series, Hydro/2 in the capacity range from 60 l/h at 25 bar back pressure up to 22 l/h at 64 bar back pressure and Hydro/3 with a delivery rate of 150 l/h at 25 bar back pressure up to 60 l/h at 64 back pressure with application-oriented performance graduation in eight stages.

The main hydraulic pump is driven as standard with a 0.37/0.75 kW; 230/400 V, 50/60 Hz three-phase AC motor suitable for worldwide applications. The stroke length is 15 mm and can be adjusted to an accuracy of 1%. Under defined conditions, the metering reproducibility is better than ± 1% in the stroke length range from 20-100%.

The pumps can be equipped with a second liquid end to increase the pump capacity. The metering rate can be further increased with hydraulic add-on pumps.