high pressure kelly hose price

239 kelly hose products are offered for sale by suppliers on Alibaba.com, of which rubber hoses accounts for 26%, other watering & irrigation accounts for 1%.

From 2003, Letone has always been committed to manufacturing rubber hose for 14 years, which provides high-grade and high-end rubber hose for the field of spaceflight and maritime industry, petroleum industry and highway, and PLA etc. Just as careful and elaborate rubber hose, LETONE has now become a high-tech enterprise integrating research, production, sales and services after years of steady development, shining brilliantly in the international market as an iconic enterprise among China"s rubber hose.

High Pressure Drilling Rotary Hoses is used in drilling and exploration work. Suitable for hydraulic fluids, such as hydraulic oil, fuel oil, lubricants, emulsion, glycol and water.Drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake. To transmit high pressure oil or water based mud.

Meets the severe demands of today’s drilling methods including directional drilling, pressure pulses and elevated temperatures. Tube is designed to handle abrasive, corrosive and oil based drilling muds. The cover is designed to handle external damage from abrasion, corrosion, gouges, oil and weather.

Recommended For:Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

A more economical alternative to our polyurethane layflat hose. Warflex is reinforced with high–tenacity polyester yarn and coated through the weave with a 70% nitrile rubber / 30% PVC blend for good chemical resistance for produced water. Less abrasion resistance and puncture resistance. Custom hose color and branding available on big volume orders.

The new Midwest Hose Layflat Deployer completes our extensive water transfer portfolio. Our Direct Drive System makes our deployer one of the fastest, most powerful, and easy to use on the market with the capacity to deploy and retreive layflat hose up to 16″ in diameter.

Designed for burner, test, acidizing, cementing, fracking, high pressure jetting, and H2S operations. Used as a flexible connection (instead of pipe) between the riser and manifold or around the ball joint of offshore drillings rigs.

Ideally suited for any high pressure hydraulic applications where there is a need for hoses to be Fire Rated and capable of working in extreme heat in the event of an emergency.

Designed for mud delivery, mud jumper, motion compensator, decoking and water injection operations on a drilling rig. Used as a flexible connection (instead of pipe) between the standpipe and swivel (rotary) or between the pump and standpipe (vibrator) for pumping mud in drilling and exploration work. Can handle higher flow rates than Grade D.

Hoses have a higher working pressure than normally available chemical hoses. CPE handles a wide variety of acids, alcohols, salt solutions, and petroleum based products.

Lightweight chemical transfer hose designed for almost every common industrial chemical used in industry today (98% of chemicals) without staining / contamination.

Designed for applications that required the hose to slide easily or require visual confirmation of material flow. Great for pumping water and light chemical solutions. Popular with pumping equipment because it handles suction discharge uses.

Designed to transfer biodiesel and ethanol blends, gasoline, and other petroleum based products under pressure, gravity flow, or medium suction. Handles up to 50% aromatics.

Lightweight, flexible, rugged suction/discharge hose that has good chemical resistance. Excellent for transferring fertilizer solutions, septic solutions, and pesticides. Hose remains flexible in sub-zero temperatures. Helix serves as a scuff strip.

Economical general service suction and discharge hose used for pumping water and light chemical solutions. PVC helix increases flexibility and abrasion resistance while the smooth interior provides maximum flow.

Designed for water discharge in construction, heavy duty equipment rental, and mines and quarries. Soft-wall hose construction provides similar performance to a layflat hose but a higher working pressure and more abrasion resistance.

Designed for dry bulk transfer of bulk cement, grains, animal feed, and other dry abrasive materials. High abrasion resistant tube resists cutting and gouges. Can be rolled for transport and storage.

Designed for dry bulk transfer of bulk cement, grains, animal feed, and other dry abrasive materials. High abrasion resistant tube resists cutting and gouges. Can be rolled for transport and storage.

Mud discharge hose designed for petroleum waste, drilling mud, diesel, and water. The standard to transfer liquid mud at high pressures from the mud pump.

Designed for use with push-on fittings for air tools, petroleum products, gasoline, mild chemicals or water. No clamps or special tools required. Hose reinforcement laid at the most effective angle for maximum strength and coupling holding ability.

Wire braid steam hose for saturated and superheated steam up to 250 PSI 450° F. Cover is pin pricked to allow venting to eliminate blistering and cover separation.

General purpose hoses for open end discharge. Non-absorbing, mildew proof, and rolls up flat for easy storage and handling. Common in construction, agriculture, irrigation, marine, and rental applications. PVC hoses resistant to oils, grease.

Designed to handle edible liquids, vegetable oils, salad dressings, vinegar, mustard and meat products requiring a sanitary hose which will not impair taste. Great for service with hot oil fat filters and fryers.

Expansion joints are used to accommodate the movement of pressurized piping systems caused by thermal growth, pressure contraction, machine vibration, seismic disturbances and installation irregularities. The expansion joint will carry numerous types of media including steam, emission gases, water, acids, alkalies, and hydrocarbons.

Designed as a hydraulic brake hose for vehicles and motorcycles. The average life of a brake hose is six years. Brake hoses swell with age and restrict flow. Generally all brake hoses on a vehicle deteriorate at the same rate.

Air Brake Tubing, Steel Brake Line Tubing Assemblies, Steel Brake Line Tubing Coils, Rubber Air Brake Hose, Silicone Coolant Hose, Silicone Heater Hose, GPR Radiator Hose, Rubber Heater Hose, Garage Exhaust Hose, Air Conditioning Hose

Camlocks, Petroleum Handling, Industrial and Oilfield Hose Ends, External Swage Hose Ends (Holedale), Crowsfeet Couplings, Sand Blast Couplings, Ground Joint Couplings, Bauer Style Quick Connects, Ringlock Fittings, Storz, Foot Valves and Strainers, Airline Accessories, Industrial Accessories, Clamps, Pressure Washer, Safety and Protection Products

Light weight and flexible for easier handling. Flexibility retained at low, even cryogenic temperatures (below -238° F). Excellent resistance to kinking or crushing. Suction and Discharge use. Up to 100% aromatics, no permeation of gases. All assemblies tested to 1.5 x working pressure.

Available in sizes 1/4″ – 12″. Operates in high/low temperatures. Fire safety up to 1200° F. No permeation of gases. Full vacuum. Annular is hydroformed, a process that enhances flexibility and extends the life of the hose. Suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum.

Plug Valves, Swivel Joints, J-55 and N-80 Pup Joints, Integral Fittings, Steel Hose Loops, Crossover Adapters and Swages, Blast Joints, Manifolds, Bull Plugs and Caps

ISO-A Series, ISO-B Series, Agricultural Series, Dry Break Series, ISO-16028 Series, Wing Series, Wing 5000 Series, Snap Tite ‘H’ Series, Extreme Pressure Series, Straight-Through Series, VEP BOP, Wing 5000 BOP, Multi-Coupler Plates and Saturn Block, Industrial Series, Tru-Flate Series, ARO 210 Series, Lincoln Series

37° JIC, Pipe, Pipe Swivel, O-Ring Kits, O-Ring, Split Flange, Face Seal, Hose Barb, Flareless Bite Type, Metric, BSPP, BSPT, Inline Live Swivel, 90° Live Swivels, 90° Dual Plane Live Swivels, Test Points, Thread ID Kits

Inverted Flare, SAE 45° Flare, Compression, Self Aligned, Polyline Flareless, Push-Connect, Push-Connect Air Brake, Compression for DOT, Compression for Air Brake Copper Tubing, Threaded Sleeve, Pipe Fittings, Needle Valves, Drain Cocks, Truck Valves, Ground Plugs, Multiple Shut-Offs, Hose Barbs, Push-On Hose Barbs, Garden Hose Fittings

Six layers of spiral wire reinforcement make G665 our highest pressure Kelly hose. It has a full 4:1 safety factor and is supplied in lengths up to 50 metres (164 ft) to minimize scrap.

API 7K Rotary Drilling hoses also called oilfield drilling hoses, vibrator hoses, mud hoses, cementing hoses, kelly hoses, de-coking hoses, for the steady high pressure oilfield service. PME Grade D and Grade E rotary hose are designed and produced for mud delivery and cement service on the drilling rigs, by pumping mud at extra high pressure in oilfield drilling operation and exploration.

PME Rubber High Pressure Rotary Drilling Hoses, API 7K Certification, Grade A, Grade B, Grade C, Grade D, Grade E, Grade F.The rotary connection between mud pump and standpipe is called mud hose or kelly hose.

Drilling rotary and vibrator hoses (High Pressure Drilling Hoses) are designed as API 7K Spec as the flexible connection between the standpipe and swivel for pumping mud at a very high pressure in oil drilling and exploration. This hose features high strength spiral steel wire reinforcement which provides a very flexible connection capable of withstanding high pumping pressures at API working pressures, also called mud hose, cement hose, kelly hose or shock-resistant hose.

Our high pressure drilling hoses are often equipped with API end fittings. Connection type covers LP, NPT, TBG and BSPT thread, welding or integral forged union or flange.