kelly hose failer quotation

Drilling hose also called Oilfield drilling hose, rotary drilling hose, is hollow, thin-walled, steel or aluminium alloy piping that is used on drilling rigs. It is hollow to allow drilling fluid to be pumped down the hole through the bit and back up the annul-us. It comes in a variety of sizes, strengths, and wall thicknesses, but is typically 27 to 32 feet in length (Range 2). Longer lengths, up to 45 feet, exist (Range 3).

Oilfield drilling hoses have found their wide application in the extraction of minerals such as oil & gas drilling. With the help of the drill pipe, a drilling mud is injected into the well at a very high pressure, most often technical water, hydrogel solution or clay-based solutions. The drill hose is also used between oil tankers and drilling wells in the sea. Drilling hoses can be used on stationary and mobile drilling rigs, for drilling wells in the sea.

The drilling rotary hose is suitable for flexible connection between the top of the drilling riser and the swivel which can move vertically. It resists corrosion of hydrogen sulfide and can deliver water, oil, mud high‐pressure media.

Rotary drilling hose is mainly used for conveying water-based or oil-based mud and other fluids in the working temperature of -30 °C to +82 °C. It is often used for oil fields, cement repairing, geological exploration and water conveyance for coal excavation. It is composed of three parts: tube, reinforcement and cover. The tube is made from NBR, which is resistant to abrasion, corrosion and oils. The reinforcement is made from 2-8 layers of high tensile and high strength spiraled steel wire, making the hose have solid structure and resistant to high pressure. The cover is made from high quality synthetic rubber, mainly chloroprene rubber, making the hose resistant to abrasion, corrosion, cut, weather, ozone, aging and sunlight. The hose has longer service life as a result.

Cover: high quality synthetic rubber, mainly chloroprene rubber, making the hose resistant to abrasion, corrosion, cut, weather, ozone, aging and sunlight.

As drilling operation methods evolve, become deeper, with increasing pressure and higher temperatures, JYM can provide a range of drilling and cementing hose solutions to meet these challenging conditions.  Our key offering includes rotary drilling / vibrator hose grade D and E, choke and kill, cement and sour hoses.  The JYM range supports the pumping of mud at very high pressure during drilling and exploration campaigns.

JINYUAN RUBBER CO., LTD. has been an important partner of many famous customers including America, East Asia, Africa and other countries and regions in the world. Oilfield drilling hoses are vital components for rig drilling systems. Rotary drilling hose, mud hose, cement hose, Kelly hose, vibrator hose are working under high-pressure. Once the hose failure, it will cause catastrophic damage to the equipment, body health and property. Our professional engineers can help you solve any problem in safe storage, handling and other technical problems. Our drilling hoses are equipped with API end fittings – flanges, NPT threads and butt-weld unions to meet requirements on the market. Bespoke end fittings are also available. Hose quality is our life. It is our aim to provide constantly high level of quality. All production processes and procedures have been strictly inspected. The final inspection before shipment is the strictest and any inferior products are not allowed in our company. When you purchase our products, we will provide considerable after-sales service. If the drill rotary hoses fail in warranty time, they can be returned without costing you one cent of shipment.

A large-diameter (3- to 5-in inside diameter), high-pressure flexible line used to connect the standpipe to the swivel. This flexible piping arrangement permits the kelly (and, in turn, the drillstring and bit) to be raised or lowered while drilling fluid is pumped through the drillstring. The simultaneous lowering of the drillstring while pumping fluid is critical to the drilling operation.

Manufacturing: Whip Checks, Nylon Hose Chokers, Cable Hose Chokers, Whip Stops, Piping Hobbles, Red Iron Chokers, Red Iron Slings, Cable Choker Hose Restraint, Hose Pipe Hobble Clamps, Hose Hobbles, Safety Shackles, Oilfield Hose Pipe Restraints, 1502 Piping Restraints, Frac Iron Safety Restraints, Rotary Hose Clamps, Pipe Safety Clamps, Flow Back Pipe Restraints, Four Bolt Pipe Clamps, Drilling Rig Fabrication, Oil Field Piping

Your vehicle’s belts and hoses are involved in processes within the cooling system, air conditioning system, charging system, and engine. These belts and hoses play crucial roles in functional operations inside your vehicle. The heater hose and radiator hose carry liquid coolant to and from the engine, radiator, and heater core. The timing belt is responsible for maintaining engine precision by synchronizing the rotation of the crankshaft and camshaft, which move the engine’s valves and pistons. However, not all vehicles contain timing belts. In place of timing belts, some vehicles use timing chains. On the outside of the engine, the serpentine belt transmits power from the front of the engine to other systems in the vehicle, like the air conditioning system and charging system. Some factors that contribute to wear and tear on your belts and hoses include vehicle age, mileage, belt tension, hose clamp failure, electrochemical degradation, and oil contamination. In the long run, routine maintenance and replacements of your vehicle’s belts and hoses will prevent breakdowns and costly repairs.

When compared to other components in your car, belts and hoses have one of the shortest life spans. These items are constantly exposed to engine heat, vehicle vibrations, and harmful chemicals, which all have the potential to cause cracks and leaks. Some symptoms to be aware of for belts and hoses nearing failure include squeaking, screeching, or grinding noises that begin when starting your engine or appear during vehicle operation. It"s worth noting that grinding sounds near belts are usually associated with a bad pulley bearing rather than the belt itself, as the pulley bearing may freeze up and ultimately lead to a belt replacement. Other symptoms of a bad belt or hose include loss of power, leaking coolant or other fluids, illuminated dashboard lights, rising steam from the engine, and air conditioning failure. While routine maintenance of belts and hoses is always important, summertime is an especially important season to keep an eye under the hood due to increased temperatures, which will accelerate deterioration of the rubber components. Since belts and hoses can be difficult to inspect visually, be sure to follow your manufacturer’s recommendations for scheduled maintenance.

Recognized as one of the most efficient high pressure hose safety restraints, the Whip Socks are designed to prevent injuries and severe fatalities in the event of a hose failure. Whip Sock’s name is inspired by the structure, the stocking style Hose Whip Stops device sits around a hose similar to a woven steel sock. The idea is to provide a grip on a hose over the larger area so to securing the hose and prevent it from whipping if a high-pressure accident causes the hose to release from its place.

There are several varieties of equipment to stop a hose from whipping around in case of unpredictable whipping hose accidents. Not only do the braided cable restraintshelp to protect the pipe from potential rapture, it also prevents the hose from whipping around.

Our Whip socks are used not only as air hose safety equipment but for other hose carrying agents as well. They can be incorporated in hose safety systems for a variety of applications where different substances are transferred through a hose at high-pressure, including; air, fluid, water, hydraulic, slurry, mud etc.

The whip sock is made for safety as its primary function. It features a unique construction that prevents unpredictable and potentially hazardous movement of a high pressure hose in the event of failure. Hence, the whip stop is ideal for any workplaces where personnel are in close working range with high pressure hoses.

The Raah Safety WHIP STOP is made from braided steel cable that wraps over the small pipe or hoses. The design is made in such a way that in case of pressure force is applied from the interior, the cable to tighten down on the hose, hence controlling the hose lashing.

The Make sure the Whip Stop has a good fit on the hose, lay it nice and flat. Once put on the hose make sure the netting diamonds are as wide as they are longer to create a nice tight fit. Once installed brace the hose and pull on the Whip Stop, it should not slide, if it slides it’s too big, you need to replace to the correct size Whip Stop. Regular inspection of the Whip Stop is advised once installed. Make sure the eyes are not elongated or ruptured or have any broken wires; Always lookout for rust on the Whip Sock or any individual strands broken. This means the whip stop has been under a load and needs to be pull out of service and replaced with a new Whip Stop.

The force calculator will give you the forces created during a failure with fluid.To calculate the force on hoses with air or gases, double the fluid reading.

Raah Safety supplies high pressure hose restraint systems, including; Whip Stops, hobble claims, whip checks, red iron sling and more. Contact us to find out more about the suitable hose restraint systems for your exact demands, or get customized tagging or pressure ratings. Place an order today and take advantage of our exceptional discounts on bulk purchases.

Though a failing coolant hose in your car might not be a life-threatening problem, it is one that can greatly affect your car over time. If you notice that your engine is overheating, this could point to a failing coolant hose.

Overheating in your car can cause engine damage and even a full engine rebuild. In order to avoid this costly consequence, bring your car to Huron Automotive in Green Bay, WI. At Huron Automotive, we can help you find and fix your failing coolant hose before it takes a toll on your engine.

The purpose of a coolant hose is as straightforward as it sounds. A coolant hose is a long radiator hose that sends coolant from your engine and your radiator to other parts of your car. It often sends coolant to the water pump and is responsible for keeping your engine from working too hard and overheating.

Your coolant hose is one of the most important parts of your vehicle. Without the coolant hose, your engine will no longer be able to run as designed and risks overheating.

One of the most important things to know is when to replace your coolant hose. It is important not to wait until noticing performance problems before opting to replace your vehicle’s coolant hose. The best thing to do is look for signs that your coolant hose is malfunctioning. Watch for these signs:

You can see a separated hose under your car hood.If you open your car hood to look inside and at any point see a disconnected tube or hose, this could mean that your coolant hose is no longer properly attaching where it needs to be. Take your car to Huron Automotive where we will replace your hose for you.

Your engine is burning or overheating.A burning smell or engine thermometer reading that shows your vehicle overheating could be a sign that your coolant is not flowing properly through your car. Replacing your coolant hose can be an easy fix to an otherwise hazardous problem.

You notice a leak under your car.If you notice a clear watery leak on the ground underneath your engine, this could mean that your coolant hose has sprung a leak. Leaking coolant will drip on the ground and form a puddle when your car is not in motion.

There are a few different reasons for why your car’s coolant hose might fail, leaving you with a leak, burning smell, check engine light, or overheating engine. Some of these reasons might include:

Your coolant hose is old.If your coolant hose is too old, it could become cracked and damaged or disconnect easily. In order to avoid a broken coolant hose, make sure to take your car to the repair shop for routine inspections where professionals can replace your coolant hose before it becomes too brittle.

Your coolant hose has a leak.If your coolant hose has a leak, it will fail to transfer coolant from the radiator or engine towards the water pump. This creates damage for the rest of your vehicle.

Your coolant hose is not attached properly.A bad attachment can put too much stress on your coolant hose, causing it not to work properly. Bring your car to Huron Automotive where we can fix your coolant hose attachment.

No matter what car you drive, at Huron Automotive in Green Bay, WI, we offer over twelve different services with a smile. With two convenient locations and rotating coupon deals for your satisfaction, we can easily diagnose and repair your car’s failing coolant hose to keep you and your family safe on the road. Call us today for an appointment.

A little more than three years ago, Eaton Corp.’s Hydraulics division announced a breakthrough technology with its LifeSense Hose, a smart hydraulic hose condition-monitoring system that detects failure-related events in a hose and sends notices that the product is approaching the end of its useful life.

Eaton developed the LifeSense hydraulic hose to combat the high costs associated with hose failure and replacement. On one end of the spectrum, running a hose until it fails or ruptures can be extremely costly, in terms of hose and fluid loss but also because of damage to machines and critical downtime. On the other hand, using a predictive maintenance schedule—in which hoses are switched out based on rated operating hours—can also be expensive. In this situation, machine owners could be losing money by replacing a hose too soon, because it could still have a long life in it.

According to Product Manager Kelly Floyd, the LifeSense diagnostics unit helps determine how much life is left in a hose. She said that about 80% of the types of failures machine operators and owners see can be detected with LifeSense. Obviously, an accident that ruptures a hose can’t be avoided, for instance.

For example, said Floyd, a municipality who normally spends $97,000 on critical hoses actually spends $97,000 plus $39,000 in unplanned downtime, equaling a total cost of $136,000. By converting to LifeSense, first year costs are $173,000 (initial spend) plus $8000 (downtime), equaling $181,000. In year two, however, the costs drop to $48,000 (two-year spend) plus $8000 (unplanned downtime), equaling just $56,000. So although the up-front costs of LifeSense are greater in the first year, the municipality would save $80,000 in just two years. That’s a big savings, said Kelly.

The LifeSense hose features a protective hose sleeve and a sensor assembly on the hose. The sensor sends signals to a hose diagnostics unit that is housed in the cab of the vehicle. This unit features lights or alarms to notify the operator of a problem with each hose assembly. A red light signals a hose failure is imminent, while a flashing light indicates a sensor is loose or a wire has failed.

The signals can be sent over a wired or wireless network. Currently, Eaton’s wired diagnostics includes wire lengths of 10, 25, 50, and 150 ft, rated at 12 or 24 VDC. The hose diagnostic unit can monitor up to 11 hose assemblies.

The wireless option also operates on a 12- or 24-VDC system, for monitoring up to 100 hoses with a 433 MHz frequency communication protocol. Although the sensors continuously monitor data, it will transmit operating data only once per shift (every seven hours) or as a vehicle passes through the gateway (for example, as a vehicle leaves a garage or enters it, where a gateway is housed). Alerts may be sent via the gateway or through text message via WiFi or Ethernet. The data is accessed through Eaton’s LifeSense web portal, which offers data on system monitoring, hose installation, and connection status. Currently, the wireless sensor has a battery life that is greater than six years but Eaton is currently working on a battery that will recharge itself.

LifeSense hose is currently available in two-wire braid designs in sizes -08, -12 and -16 (1/2, ¾, and 1 in.), rated for 293, 215, and 172 bar, respectively (4250, 3125, and 2500 psi). Eaton plans to offer -04 and -06 wire-braid designs as well as spiral hose in the near future. Eaton is also exploring cellular and satellite expansion of the wireless diagnostics options, with CANBus interface development also under way.

Kelly Severide is a firefighter and the company officer for the second shift of Rescue Squad 3. Severide was previously known as a "ladies man", but has recently become more than that, with his character development and stable relationship. He is portrayed by Taylor Kinney.

Kelly is dedicated to his position in Rescue Squad and is proud to be there, happy that he did not need the help of his father to get where he is today.

Severide has many ex-girlfriends and flings, however the only relationships that seem to last are friendships, like those with his best friend Leslie Shay, his half-sister Katie Nolan and fellow firefighter Matt Casey. Recently, however, he has maintained a steady and healthy relationship with Stella Kidd. He also has two brothers from his father, Benny Severide"s marriage to his step-mother.

Kelly"s father Benny Severide was a member of Rescue Squad 4, alongside Wallace Boden and Henry Mills. When he was ten, his father walked out on the family, leaving Kelly with abandonment issues.

While meeting with his father, Severide spots Benny hugging a young lady believing the latter is cheating on his wife with her. Kelly then meets with Benny who tells him that he will succeed Boden as the new chief of fire house 51. This news leaves and shocked and angry with his father for trying to do that despite his close friendship with his chief. (A Power Move)

He was going for a run when his stepmother Beth for peers and discusses his father who has not been home in months, despite previously telling Kelly that he still was. He promises to speak with Benny for her on behalf of his half-brothers. While going on his jog, Severide comes across a secluded and empty construction site and encounters a young boy Nathan who has been trapped in a backhoe loader and is in dire need of assistance. After he notices the boy is wounded, he does his best to ensure that no more blood is lost while struggling to find a way to save him. The pair are trapped for the rest of the night, passing the time to talk. Kelly still learns that Nathan did this because his father who abandoned him was previously a construction worker and he wanted to learn how to do this on his own with him being able to relate because of his own father issues. Kelly is able to get free is able to cause the loader to flip back. Meanwhile, Shay who was looking for Kelly spots this and quickly arrives to his location. Severide stumbles out with Nathan in his arms, and the three race to the hospital. Shay and Severide sit wearily in the waiting room, rewarded by a chipper Nathan and his grateful mother. The long run and grueling night were worth every moment to Severide. (Joyriding)

He later confronts the young lady about her supposed affair with Benny until she reveals that Benny is her father, making her his half-sister, Katie Nolan. Very soon, Severide confronts his father and lashes out at him for everything. At the end, Benny acknowledges that Severide is right about him and apologizes for not being there for him. He also decides not to take the position of chief from Boden because of their friendship. Benny decides to go back to his wife and other sons but not before telling Kelly to get to know his sister. Soon Kelly goes to find Katie and formally meets his sister for the first time. (No Regrets)

Kelly continues to bond with Katie by having her over for dinner. He nearly walks in on her and Otis, after they kiss while playing the game Catan. Otis later asks for Kelly"s blessing to ask his sister out, after being really uncomfortable sneaking around behind his back, which he gives. (Shoved In My Face, Out With A Bang)

While at the firehouse, Kelly is approached by Katie on something. Katie has been offered a job opportunity in New York and it was a permanent situation. However she was unsure if she really wanted that because of their growing bond and her current relationship with Otis. During a blackout, he gets into altercation with a man named Vince Keeler. However, Katie is kidnapped by two men working with Keeler. (Tonight"s The Night)

His missing sister causes him to become determined to find her. He encounters one of the thugs and threatened him with a bat until he gives up Keeler. He found his sister in an abandoned building. He finds that she was attacked badly and he brings her to the hospital. Kelly wants to be there for his sister but is told to leave but not before telling her that he loves her. Kelly also gets into an argument with Mrs. Nolan who tells them it was his fault that Katie was hurt and he argues with her. He later apologized for this and she does the same to him. He is allowed to go to Katie and she tells Severide that even though she loves him, she"s accepting a job offer in another state and moves away. Before they part, brother and sister share one last hug.

Much later, Benny comes to Chicago to discuss the situation with Katie but is told his daughter already moved to get away from the drama. Benny tried to persist in talking to his son about the issue but Kelly told him if he cared so much then he would’ve stuck around. Kelly is angry when Lindsay reports to him that Vince Keeler, has been released. He gathered his comrades from squad three to help in going after Keeler something oldest wanted to take part in but Lindsay later tells him the Keeler went missing. (Keep Your Mouth Shut)

Kelly is called for the disappearance of Keeler. Voight takes to interrogating Kelly but he has nothing to give them. Kelly also has comrades keep quiet about his intended plans of revenge. That night, he dinner with his father and Shay, with Benny cooking up a fish that he caught in the lake. They discuss the case with the missing mobster Vince Keeler and he is told that the police are looking into firefighters. During this talk, Kelly is suspicious when Benny subtly implies that he had a role in the case something Kelly quietly picks up on. It is later confirmed Benny had been responsible for the murder of Vince Keller, when he arrived at 21st police district to speak to Hank Voight. Trudy Platt tells him that Voight was not around so he leaves his number. At a bar, he seems to confess to his involvement while preparing to turn himself in for his crimes. However, Voight understood his grief (being a father himself) and let him flee to Kenosha. (A Rocket Blasting Off)

Severide"s close and old friend Scott Rice is transferred to Squad 3. This raises tensions between him and Mills, who also wants his old spot back as he"s waiting for his medical clearance, but Rice gets there first. Scott tells Kelly that their old high school friend (April Sexton) is in town working at Chicago Med. In Forgiving, Relentless, Unconditional, Kelly explains why he passed some time at April"s house during his junior year: his father, Benny Severide, cheated on his mom with a school teacher (from Kelly and April"s school) in their own house. Mills is eventually transferred to Squad 3 again, but only stays a shift before deciding to leave to be with his family in North Carolina. Rice remains on Squad 3 until Otis starts to accuse him of being a "ducker" and avoiding tough calls. He initially claims there was a malfunction with his oxygen mask, which Otis and Cruz disprove. This causes great tension between Truck 81 and Squad 3, going as far as Severide nearly hitting Otis at Molly"s while defending Rice. However, the accusations prompt Severide to check the mask and he finds out Otis was telling the truth. Scott is dismissed from firehouse 51.

Kelly also develops a brief attachment to Detective Bianca Holloway at CPD when he tries to tell her that a missing body they find is a young girl who disappeared from his neighborhood a few years ago. She is initially irritated at his efforts in trying to identify the girl and tells him to back off. However, Severide turns out to be correct and later on, she asks him for a favor - to look after her son JJ while she prepares for a court hearing on a dangerous gang she had been investigating for years. He agrees, but doesn"t know about this until Antonio tells him about it. She tells Kelly she"s worried for her son"s safety and wants Kelly to look after him. He tells her she can drop him off anytime.

On the day of the hearing, she drops JJ off with Kelly for a few hours. However, CPD is soon at the firehouse and inform Severide that Detective Holloway was shot outside the court. He is upset to hear this, but insists that JJ stay with him until his aunt, who has requested that JJ not be told, has flown in from California. The officers agree and tell him to remain at the firehouse. The firehouse help JJ with a school project, trying to divert his attention from his mother, who he keeps asking to call. They let him film them for his "Day In The Life of a Firefighter" documentary and he tells them that now he just has to film his mom. A few hours later, Detective Crowley from CPD is back to tell him that Holloway died during surgery. He still insists that JJ stays with him until Mary (Bianca"s sister) is here and doesn"t let the other officer take him. Mary arrives later that night, and clearly upset and crying, asks Kelly to help her break the news to JJ. They take him to the briefing room next door and tell him with the whole firehouse watching from the window in the common room. He breaks down and Mary takes him away. Just before he leaves, Severide gives Pouch, their dog who has also grown close to JJ, to JJ as he cries in the car. He tells him he can visit or call anytime.

Severide is approaches by a fire chief from Springfield urging him to replace him on his position. Kelly seriously considers this, as he would love to start a relationship with Anna in Springfield. (An Agent of the Machine, Trading in Scuttlebutt, Purgatory) His hesitation is ended by Anna, who turns up in Chicago. Kelly finds her an open spot in Chicago Med (she works as a nurse). They"re happily dating and Severide even succeeds in making Anna feel like home. (Deathtrap, Telling Her Goodbye, Babies and Fools) Unfortunately, their happiness is short-lived, because Anna"s cancer returns. Kelly supports her in every way, but she dies anyways. Severide has a really hard time coping with her death, but eventually somehow manages to move on. (Take a Knee, Carry Their Legacy, Carry Me)

Stella moves in with Kelly. She tries to be cool with the idea of him dating, but she"s still jealous when he sleeps with Brett"s friend Hope Jacquinot.

After not seeing Severide for a few days, she grows concerned and suspects he is in Benny"s old cabin in the woods. When she goes to the cabin, Kelly answers the door and he tells her that she was right to break up with him because she deserves a better man, then he vows to be that better man and they make up. (

During Harold Capp polishing the original firehouse bell before they are called to a fire. During the call at an impound lot filled with toxic gas, Kelly watches as Capp is hit with a large wave of gas. Severide and Casey later learn that he has skipped treatment and gone missing, Will Halstead setting a deadline for them to find him. The two find Capp at his home, still suffering from the effects of the gas but after talking with him, they convince him to go back. Capp emerges from the room with glasses, telling them that he can no longer be a firefighter with his poor eyesight. However, Severide sees through this and states he is okay, with Capp revealing his ruse. Capp reveals that he will be fine in time and teases an amused Severide for being worried about him. The pair take Capp to Molly"s, where he is welcomed back. Hermann even offers free beers to celebrate Capp"s return, to the latter"s joy.

In Rattle Second City, the squad answer a call. Severide is nearly caught in the fire but it saved when Stella comes to his aid. At the house, Stella informs Kelly that Boden recommended that she take the lieutenant exam he supports her decision if she goes through with it. Stella also points out to Kelly that maybe something is going on with Casey and Brett, after the latter stays late at her home because of a stalker something that he takes note of.

During Smash Therapy, Kelly is approached by Casey to talk while smoking cigars. It was here the Kelly learned about Casey and Brett nearly hooking up being amused by this.

As an adult, Kelly still resents his father, but they gradually reach neutral terms. Kelly is also upset to learn that Benny had other children that he never told him about and lashed out at him for continuing his cycle of abandonment. Very soon, Benny meets him and acknowledges he was right about him while apologizing for his actions.

Kelly also realized that his father had something to do in the role of a missing gangster Vince Keeler who was responsible for kidnapping his sister Katie. However, Kelly likely did not confront his father on this because his father had done something right for their family.

Despite all his years of resentment towards Benny, Kelly ultimately showed that he did in fact love his father and was devastated by his death. Kelly paid his respects by giving a speech to Benny at his funeral.

From his childhood, he had a good relationship with his mother who was his primary parent after his father left. During a confrontation with his father, Kelly lashed out at his father for leaving him and his mother to struggle.

Initially, Kelly mistook Katie for his father"s mistress when he first saw them together until Katie reveals that she is his daughter. He is shocked to hear this, but is pushed by his father into meeting her and he awkwardly tells Katie that he is her older brother. At first, when the two talk, Katie thinks Kelly is a no show like their father, but he assures that he is not like their father and to see for herself.

In You Will Hurt Him, the siblings start to connect, with Kelly even being protective of her after seeing Otis flirt with her. Katie was also amused by him giving the “death stare“ to the latter. When Katie graduated from Cooking School, Kelly was the only member of her family to attend the ceremony and congratulated her, much to her joy. After the ceremony, Kelly told her that as her big brother he will be looking out for her from now on. To that end, he also organized a party for her at Molly"s, something she greatly appreciated and nearly cried tears of joy before hugging Kelly as thanks.

The two become close with Kelly referring to her as "Sis". After Katie is offered a job in New York, she confides in Kelly that she was unsure whether she really wants to take it because of their growing bond. Kelly appreciated her telling him and promise to talk more about it but Katie was kidnapped in Tonight"s The Night.

This caused him to become worried, so much that he went to Erin Lindsay for comfort in the crossover. Afterwards, he took matters into his own hands and attacked one of her abductors in Virgin Skin. Kelly soon locates his sister and brought her to the hospital, where he tells her he loves her and only wants for her to be okay. He also confronted her mother about her paying more attention to her stepchildren rather than Katie.

After getting hooked on pain pills, he saved Renée"s life and it resulted in them dating. She moved to Spain and he stayed behind. She is also known as "Renée 2" as his ex-fiancée was "Renée 1". She returns in the season 1 finale to tell Kelly that she is pregnant, hours after he learned that IVF with Shay didn"t work out. However, Severide soon figures out that the baby isn"t his which prompts Renée to depart, leaving Severide heartbroken.

Brittany Baker-Severide was Kelly"s first wife. The two first met at a craps table when Kelly goes on a weekend trip to Las Vegas and he asks for her help with betting due to her beginner"s luck. After their second roll of winning, he kisses her. The next Monday, Kelly shows up at Firehouse 51 wearing a wedding ring and seems ecstatic, telling all of his colleagues that he married Brittany, 24 hours after they met, at a Silver Bells Wedding Chapel.

Kelly and Brittany decide to end their marriage in Arrest in Transit, after Kelly realizes that although they love each other, he became Brittany"s escape from her parents after the loss of her sister. They split up at a train station and Kelly allowed Brittany to keep his ring, as a memento before he watched her head home to Florida.

Anna Turner was a patient with leukemia, who Kelly decided to help by donating his bone marrow to her. After this transplant, Anna and Kelly became close, and she eventually became his girlfriend. However, her illness got worse, and she dies in Carry Me. Kelly was there when she died, begging the doctors to revive her, but she had signed a DNR, preventing them from resuscitating her.

Severide was in a relationship with Stella until his father"s death. She told him she had been trying to work with him and take care of him, but he was not reciprocating and broke up with him. They got back together in I"m Not Leaving You and have been together ever since. Kelly has mentioned that he wants to stay with Stella forever, mentioning their children and grandchildren together.

Kelly Severide and Matthew Casey are coworkers and lieutenants at the fire station. At the beginning of season one, after the death of a close friend, they have some trouble getting along and often butt heads, but would come together for the sake of the house. By season 2, they have stopped blaming each other and get along very well. They are often seen putting themselves in danger to protect each other, such as when Kelly went into an unstable burning building to help Casey rescue his fiancée, Hallie. After Casey is injured in

Kelly and Leslie Shay are co-workers, best friends, and roommates. In Season 1, Shay was supplying Severide with pain medication to help with his neck injury. In God Has Spoken, Shay and Dawson are restocking the ambulance at the scene of an MVC when a flatbed tow truck blows a tire and hits the ambulance. Dawson only had minor injuries, but Shay sustained a major head injury. She survives, but Severide blames himself for the accident because they were restocking painkillers Shay had given to him. He felt better once she came back to work and the accident was never mentioned again. She also wants him to donate sperm for her to conceive a child.

In Season 2, when Kelly is interviewed by Voight about the disappearance of Keeler, Voight asks him if Shay is his girlfriend. He responds "She would be if she wasn"t a lesbian." Shay also said if she was not a lesbian then Kelly would be her choice of a man to date.

In I Am the Apocalypse, when Kelly is seriously injured during the Chicago Med incident, he"s shown to be having dreams about her laughing while he"s in surgery.

Your car or truck’s radiator hoses, which connect the engine to the radiator, are important components that maintain consistent internal engine temperatures. The upper hose connects to the top of the engine, while the lower hose connects to the bottom. Coolant flows through the engine to cool internal temperatures and works with the hoses. Radiator hoses carry hot coolant away from the engine and into the radiator, a large tank with small channels where the coolant flows to dissipate heat. Radiator fans, which are located behind the radiator, help cool the antifreeze or coolant once it enters. The radiator hoses also carry the coolant back into the engine to absorb the heat created during the combustion process. Once the engine reaches operating temperatures, the hot coolant cycles back to the radiator where it is cooled again. Because the engine can reach extreme temperatures, the coolant is often extremely hot. Over time, hot coolant can cause radiator hoses to deteriorate from the inside out.

Replacing your radiator hoses is one way to minimize the chance of engine failure and breakdowns. A visual inspection of your hoses can help you determine the proper time to replace them. Cracks, bulges, and hardened hoses are all signs that your radiator hoses are nearing the end of their useful life. Poor heating system performance also indicates a problem with your hoses. Heat, vibrations, and corrosion are all contributing factors to bad radiator hoses. A coolant leak in either green, red, or yellow liquid is another warning sign of a cracked or corroded radiator hose that should be replaced. Bad hoses can cause serious engine damage through an overheating engine or catastrophic failure. At the first sign of a bad radiator hose, be sure to contact our service staff to have your radiator hose replaced.

There are thousands of reasons for hydraulic hose failure, but with proper precautions, the most common failures can be avoided. The following are the 8 most common reasons for hose failures shared by Hydraulic Hose Suppliers.

Corrosion of hydraulic hoses often leads to external leakage. Corrosion of the inner rubber layer is usually caused by concentrated high-speed fluid or by fine particles in the fluid.

In order to avoid corrosion of the inner rubber layer, determine the appropriate hose size according to the recommended maximum flow rate. In addition, it should be ensured that the hose assembly does not produce excessively tight bends, and that the fluid medium does not cause excessive abrasion of the inner rubber layer of the hose. During the hose assembly process, it is very important to comply with the maximum bending radius and diameter requirements specified in each hose engineering specification.

Incompatible fluids will cause deterioration, swelling and delamination of the inner rubber layer of the hose assembly. In some cases, the inner rubber layer may also be partially destroyed. The hose must be compatible with the fluid being transferred. Make sure that the fluid is not only compatible with the inner rubber layer, but also with the outer rubber layer, joints and even O-rings.

The inner rubber layer of the hose may have many tiny cracks due to old or dry air. Sometimes, this type of failure is difficult to find because the hose can still remain flexible, but there will be signs of external leakage.

To avoid dry or stale air problems, you should verify that your hose rating is suitable for extremely dry air. For these applications, it is best to choose a hose with EPDM inner rubber material. If possible, the dew point of the air should be increased.

In vacuum or suction applications, if the bending radius is exceeded, the hose may become flat in the bending area. This will hinder or restrict the flow of media. If the bend is too severe, the hose may become kinked. In order to prevent malfunction of the minimum bending radius hose, the recommended bending radius should be carefully checked.

When the hose assembly is not properly crimped, it may cause a very dangerous situation. The connector must be pushed completely onto the hose in order to meet the recommended insertion depth requirements. The grip of the last lap on the connector housing is very important for the strength of the hose.

In order to find the appropriate insertion depth, Jerry has developed a precise production process, which will ensure that the hose is pushed to the position that meets the correct insertion specifications.

For Hydraulic Hose assemblies, contamination can cause various problems. When cutting the hose, metal particles and debris may be deposited in the hose if it is not properly flushed. The abrasive left in the hose will contaminate the hydraulic system. In addition, it may also cause small cracks in the inner tube of the hose assembly, which can lead to leakage.

To prevent hose failure due to contamination, the hose must be properly cleaned before being inserted into the joint. Before inserting the connector, the inner tube should be "very clean". After the assembly is crimped, make sure to install the dust cap to keep the hose clean and avoid secondary pollution during transportation.

Overheating of the hose assembly can also cause hose failure. Overheating will cause the hose to become very hard. The inner hose will harden and begin to crack because the plasticizer in the elastomer will begin to decompose or harden at high temperatures. In some cases, the cover layer may show signs of excessive drying. After the hose assembly is removed, it may retain the shape it was installed in. If it is bent, a cracking sound will be heard.

In order to prevent the hydraulic hose assembly from overheating, it should be confirmed that the rated temperature of the hose meets the temperature requirements of the application. In addition, lowering the ambient temperature or using protective covers and shields will protect the hose from nearby high-temperature areas.

Hydraulic hoses need to go through harsh environments every day, and the effects will eventually show up on the hoses. If the inspection is not performed regularly, wear and tear may cause the hose assembly to rupture and leak. If the hose is excessively rubbed against an external object or even another hose, the coating layer on the hose will be worn away and eventually the strengthening layer will be worn away.

A correctly assembled and installed hose will have a longer life, thereby reducing downtime and maintenance costs. Our company also provides Metal Hoses, please feel free to contact us if necessary.