kelly hose specification made in china

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

Kelly hose is used to connect the standpipe to the swivel. It allows the drill string to be raised and lowered while the drill fluid is pumped through it. Kelly line usually contains two layers of plated steel cables to reach 5000 psi operating pressure. Inside tube is made of special NBR to improve abrasion and corrosion capability. Rubber cover is compatible with the ozone, sunlight and oils for a long time. It is supplied with multiple end fittings – API flanges, threads, butt-welded union and other as specified.

A rotary/pumper hose is used in oil well drilling. It acts as the crucial instrument in the connection being made between the standpipe and the swivel.

A rotary hose is also used as a means of permitting the kelly to be either raised or lowered through the drilling process while also allowing the drill bit to be raised with the drillstring. For this reason, it is also often referred to as a “kelly hose.”

Rotary hoses also function during the process that allows the drilling fluid to be pumped through the hose when the bit and drillstring are raised and lowered.

This process is imperative in the completion of the drilling process. The drillstring portion of the drilling line and the connection to the rotary hose is thus crucial.

A large-diameter (3- to 5-in inside diameter), high-pressure flexible line used to connect the standpipe to the swivel. This flexible piping arrangement permits the kelly (and, in turn, the drillstring and bit) to be raised or lowered while drilling fluid is pumped through the drillstring. The simultaneous lowering of the drillstring while pumping fluid is critical to the drilling operation.

Made of heavy rubber and steel cables the hose is basicly flexible piping that allows the Kelly and the bit and drill string to be raised and lowered while the drilling fluid is pumped through drill string.

lowering the drill string and pumping drilling mud is very important to the drilling process and when these hoses go down or fail in service a entire rig can shut down.

Made of heavy rubber and steel cables the hose is basicly flexible piping that allows the Kelly and the bit and drill string to be raised and lowered while the drilling fluid is pumped through drill string.

Rotary Drilling/Pumper hose is mainly used for conveying water-based or oil-based mud and other fluids in the working temperature of -30 °C to +82 °C.

The reinforcement is made from 2-8 layers of high tensile and high strength spiraled steel wire, making the hose have solid structure and resistant to high pressure.

The cover is made from high quality synthetic rubber, mainly chloroprene rubber, making the hose resistant to abrasion, corrosion, cut, weather, ozone, aging and sunlight.

A Kelly hose (also known as a mud hose or rotary hose) is a flexible, steel reinforced, high pressure hose that connects the standpipe to the kelly (or more specifically to the goose-neck on the swivel above the kelly) and allows free vertical movement of the kelly while facilitating the flow of drilling fluid through the system and down the drill string.

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

We are global leader in the design, manufacture and supply of high pressure hoses.As drilling operation methods evolve, become deeper, with increasing pressure and higher temperatures,

We have over 50 years of experience in metallic reinforced bonded elastomer hoses and has been the first company to obtain certification for all three governing industry standards: API 7K, 16C and 17K standard.

We have since built up a broad portfolio for a variety of drilling applications, such as flexible choke & kill Lines, rotary & vibrator hoses, managed pressure drilling hoses to meet the needs of both onshore & offshore drillers and distributors.

Our key offering includes rotary drilling / vibrator hose grade D and E, choke and kill, cement and sour hoses. The supports the pumping of mud at very high pressure during drilling and exploration campaigns.

Protects the polymer lining from mechanical damage, prevents blistering in case of high pressure gas service and decompression with vacuum service, supports the wall of the flexible hose.

The lining material is selected to withstand chemical and heat effects of drilling mud, well effluents, cement slurry, hydraulic fluid or whatever substance is conveyed through the hose.

High-pressure mud hose also called rotary hose, vibrator hose or jumper hose, is used to convey drilling fluid from mud pump to the mud standpipe manifold on the drill floor.

Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.

Kelly drilling hoses are big inside diameter (3" to 4" ID) high pressure flexible lines used to between the standpipe and the swivel. This flexible piping permits the kelly to be raised and lowered while drilling fluid is pumped through the drill string. The simultaneous lowering of the drill string while pumping fluid is very important to the drilling operation.

As API 7K rotary drilling hose assembly manufacturers in China, Shanghai PME Industrial is one of the world"s most trusted rubber hoses factory and supplier on high pressure drilling hoses for thirty years.

Working pressure of rotary hoses for oilfield drilling is 5000 psi or 7500 psi as API 7K Standard. It also namedkelly hose 7500 Psi Grade E, API 7K Drilling Hose, with standard service and H2S Sour Service.

PME super driller rotary drilling hoses 7K Grade E are withsteel armored fire resistant cover, that is, stainless steel wire hoses to extent life for mud delivery hose for oilfield drilling rigs.

Rotary vibrator drilling hoses, API 7K high pressure mud and cement hoses supplied by Shanghai PME Industrial delivered with safety clamps, hose lifting eye, collar clamps and stainless steel armor are available.

More requirements about high pressure test report, mill certificate, coc, technical drawing about high pressure drilling hoses, feel free tocontact with our sales team.

API 7K Rotary Drilling hoses also called oilfield drilling hoses, vibrator hoses, mud hoses, cementing hoses, kelly hoses, de-coking hoses, for the steady high pressure oilfield service. PME Grade D and Grade E rotary hose are designed and produced for mud delivery and cement service on the drilling rigs, by pumping mud at extra high pressure in oilfield drilling operation and exploration.

PME Rubber High Pressure Rotary Drilling Hoses, API 7K Certification, Grade A, Grade B, Grade C, Grade D, Grade E, Grade F.The rotary connection between mud pump and standpipe is called mud hose or kelly hose.

Drilling rotary and vibrator hoses (High Pressure Drilling Hoses) are designed as API 7K Spec as the flexible connection between the standpipe and swivel for pumping mud at a very high pressure in oil drilling and exploration. This hose features high strength spiral steel wire reinforcement which provides a very flexible connection capable of withstanding high pumping pressures at API working pressures, also called mud hose, cement hose, kelly hose or shock-resistant hose.

Our high pressure drilling hoses are often equipped with API end fittings. Connection type covers LP, NPT, TBG and BSPT thread, welding or integral forged union or flange.

3）tube tightly, use a soft, small deformation under pressure. 4）hose has excellent resistance around the song and fatigue resistance. Good Sales Service * Inquiry and consulting support.

Of course, those do still exist. And they have their place too, in situations where you might need something that tough. We recommend one made from the traditional rubber, in fact, as well as the best in class for other situations.

Many people who have used a Flexilla garden hose swear it’s the greatest ever made. It also does well in expert testing, where it lives up to its kink-free claims.

The manufacturer says the material is lead-free and drinking water safe, although it’s not tested or certified by any of the agencies that verify those claims. They also say it can withstand temperatures from -40 to 150°F, and owners attest that it holds up well in hot temperatures.

Need a tough garden hose for washing your car, for powering a pressure washer, or that can live outside during the worst winters? Then the Craftsman Premium offering should be at the top of your list.

This is a popular pick for landscape professionals and those who need something that can stand up to light commercial applications, such as mixing cement.

This product is as durable as they come. We saw a number of comments from owners who ran theirs over with their car (accidentally, of course) and reported that the couplings didn’t crush, and the hose was oblivious.

If you’re looking for something that’s a little easier on the wallet, but still easy to wrangle in a small garden, we recommend the Gatorhyde Coiled Garden Hose.

This setup includes the reel, a 9/16-inch diameter, 82-foot hose with a seven function nozzle, and a 6.5-foot leader hose. Many owners like that 82-foot length, saying it’s a nice alternative to having to choose between that standard 50 or 100 feet.

The Hoselink is intended to be wall-mounted and, when mounted, the reel can swivel 180 degrees. You will need a drill for the installation, so keep that in mind.

Users say the reel is easy to install and use, and the hose retracts very easily with the automatic rewind. Many also note that they’ve had one for several years and it is holding up well. The whole setup weighs 30 pounds.

The hose and reel are made from PVC and polypropylene with brass couplers, and stainless steel and plastic fittings. It is not food grade, so it’s probably best to avoid filling the dog’s bowl with this one.

The hose in integral to the reel and cannot be replaced. One nice feature is that the reel keeps the hose protected even in extreme weather conditions.

It’s not as sturdy as a traditional model, and some users complain of leakage and deterioration. However, the latter issue seemed to be more of a problem when the hose was left out continually, rather than rolling it up and storing it after each use.

Ideal for watering delicate new grasses or long, narrow areas like the side of a house, the Gilmour Vinyl Sprinkler Hose is a very versatile choice that can also function as a soaker. Just position it with the white side up for sprinkling, and the white side down for soaking.

The fittings are nickel plated. It measures the standard 5/8 inch in diameter. It only comes in a 50-foot length, but you can attach up to three hoses. Gilmour offers a lifetime warranty.

Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.