klc kelly hose cover for sale

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

Kelly hose is used to connect the standpipe to the swivel. It allows the drill string to be raised and lowered while the drill fluid is pumped through it. Kelly line usually contains two layers of plated steel cables to reach 5000 psi operating pressure. Inside tube is made of special NBR to improve abrasion and corrosion capability. Rubber cover is compatible with the ozone, sunlight and oils for a long time. It is supplied with multiple end fittings – API flanges, threads, butt-welded union and other as specified.

The Weber Spirit II E-310 provides the unrivaled combination of top-notch grilling performance, a versatile three-burner design, durability, and a relatively affordable price. It excelled at every test, producing the best sear on our burgers of any grill, and equaling or outdoing the others in our tests involving barbecue chicken and whole roasted chickens. The Spirit II E-310’s overall compact size (helped by a fold-down side table) suits almost any patio or deck. And yet its grilling surface is big enough to cook a complete meal for a family or a dozen burgers for a party. With a thick cast-aluminum firebox, this model will last for years. (Weber’s warranty covers all parts for a full decade—among the best coverage in the industry.) For decades, the company has refined the Spirit’s design, too. This version includes an easily accessible externally mounted propane tank and an under-grill shelf. On top of all that, this grill is particularly easy to assemble, maintain, and use, and its finish comes in four colors (black, white, red, and blue).

The Spirit II E-310 also exhibited the most consistent heat across the entire cooking surface in the 2018 test, just as the original Spirit had done in 2017. Among the competition in our 2017 test, the Napoleon model in particular had noticeable cool spots toward the front of its grates. To a degree, all grills suffer from this problem, because the burners don’t extend all the way to the front of the firebox. But the Spirit II E-310 offered the most consistent heating across the entire grate surface. After 10 minutes, the burgers at the rear (the hottest part of the grill) were medium-well, and those at the front were medium-rare to medium (if your diners have various preferences, this difference might even be handy). On the Napoleon grill, meanwhile, some of the front burgers were nearly raw in the center, while the rear burgers were well-done.

During the low-and-slow grilling of the cut-up chicken, the Spirit II E-310 held almost perfectly steady at 375 °F, requiring almost no fiddling with the burner knobs—a quality it shared with the Genesis II. Both produced perfect barbecue chicken. By contrast, the Napoleon grill struggled to produce chicken with crisp, browned skin, and we soon discovered why: Its built-in thermometer was registering 50 degrees hotter than the actual temperature inside the grill. The result was flabby barbecue. The Broil King model had the opposite problem, running way too hot—as high as 450 °F, even with the burners on low. The result was charred chicken and burnt sauce.

The gas tank mounts externally (see the top photo in this section), instead of in a cabinet underneath the grill, as is typical (such as on the previous-generation Spirit). That makes it much easier to install a new tank and unhook an old one, because you’re not scrabbling around a small, dark enclosure to find the hoses and brackets. This design also allowed Weber to put a sturdy shelf under the grill—a handy place to store pans, bags of wood chips, a small cooler, and other stuff you may need while grilling. Plus, one of the side tables folds down, making the grill more compact for storage when it’s not in use (it’s 43 inches wide with the table down).

Several members of our staff have been using the Spirit II E-310 at home for the past three to four years, and they have reported that their grills have stayed in great shape and are still working well (you can read their notes just below). As a company, Weber constantly refines its designs, even on its classic charcoal kettle grill, which has been around for well over 60 years. And, again, Weber’s warranty covers all parts of the Spirit II E-310 for a full 10 years. So the company has a financial incentive to build it to last for years.

The Spirit II E-310 (and every grill) should come with a grill cover. This one doesn’t, nor did any grill in our test group, so you’ll need to buy one separately. Weber’s dedicated Spirit II cover costs about $80, and a well-regarded generic cover costs about $30 (both at the time of writing).

Wirecutter editor-in-chief Ben Frumin has been long-term testing the Spirit II E-310 since summer 2019. He says: “It replaced a years-old grill (a Kenmore, I believe) that was totally serviceable but kinda old and gross. I was immediately blown away by how much better our pick is. It was so easy to use. It heated up way faster than my old grill, cooked meat faster and more evenly, was easier to clean, and was just so clearly better overall. I use it to grill up burgers, hot dogs, salmon, chicken, mushrooms, Beyond Burgers, and a bunch of other stuff.” After nearly three years of using the grill (which was first acquired and tested by our team in 2018), Ben did have to replace the Flavorizer bars, or burner hoods. Unfortunately, he didn’t realize they were under warranty, so he did not contact Weber. “I also discovered recently that one of the three burners no longer ignites easily, which might mean it’s time for a good cleaning. For now, I just use a lighter to get it to catch.” Overall, however, Ben says the grill still works great.

Government officials acknowledge that the program was rife with fraud and did not weed out undeserving applicants. But there was a way to remedy those early errors: Deny forgiveness. That could have thwarted scam artists and forced businesses that prospered to repay the money.

The SBA disputes those findings, but its own inspector general has estimated that at least 70,000 loans are potentially fraudulent. An unknown additional number of loans went to companies that didn"t need PPP funding to survive the pandemic.

And although the Justice Department and other federal agencies have up to 10 years to prosecute pandemic fraud, the SBA"s inspector general has called that pursuit a "pay-and-chase" situation unlikely to recover much money.

He made those remarks despite acknowledging that some well-resourced loan recipients, such as the Los Angeles Lakers, should not have applied for the funding, which they later returned.

"In some cases, there are some folks who probably didn"t need the money," he said. "At the same time, those were crazy times," he added, noting that PPP was created amid enormous societal fear and an unprecedented economic shutdown.

"It"s an easy sentiment, in my opinion, to say, "Well, there goes the government again. Why didn"t they do it right?" But to me, it ignores the awesomeness of what did get done right," he said. "I"ve met many, many, many, many, many more people who are thankful for the relief that we chose to do as a society together."

But when pressed on why the government wasn"t more stringent in both approving loans and forgiving them, and why it is now scrambling to recover money that has already been paid out, Kelley said, "These are excellent questions for Secretary Mnuchin from the Trump administration."

Still, "because PPP got up and running, because all of those small businesses were able to maintain people on payroll, we did not realize the catastrophe that could have taken place had we failed," Faulkender said. "What would bread lines during a pandemic have looked like? Do we want to know? I didn"t. And so we were going to get that program up and running."

According to NPR"s analysis of SBA data, the majority belong to one-person businesses — companies the Paycheck Protection Program most intended to help — and people whose loans were processed by financial technology companies, or fintechs, a nebulous term broadly defined as businesses that use technology to automate financial services.

Those two categories of borrowers are interrelated, because one-person companies were more likely to get their loans through fintechs than through traditional banks, which were criticized for neglecting smaller PPP applicants in favor of larger banking clients.

"All of these small businesses ... they were just torturing them," said Nancy Kelly, owner of a small Boston accounting firm that got a $60,000 PPP loan through Kabbage, and who described the forgiveness process as a prolonged ordeal. "If I had known the difficulty, I would have just lived without the loan."

"It"s as if you came home from work one day, walked into your kitchen, and noticed, "Oh my God, there"s a small fire by the stove — I need to put this out." But you don"t have a fire extinguisher," he said. "So you go outside, connect a huge hose to a fire hydrant, and come in and douse your entire house with water. Well, that would certainly put out the fire, but it would be a very costly thing to do."

TO ALL CREDITORS OF MUSTAPHA M. MANSARAY AND RITA S. SESAY, INCLUDING THOSE HOLDING LIENS BY JUDGMENT OR OTHERWISE ON THEIR REAL ESTATE, OR ANY PART THEREOF.

In pursuance of a decree of the Circuit Court of Jefferson County, West Virginia, made in a cause therein pending, to subject the real estate of Mustapha M. Mansaray and Rita S. Sesay to the payment of their debts, including those which are liens on such real estate, or any part of it, you are hereby required to present your claims to the undersigned for adjudication at the office of D. Frank Hill, III, located at  136 E. German Street, P.O. Box A, Shepherdstown, Jefferson County, West Virginia 25443-0600, on or before the 15th day of June, 2022; otherwise you may by law be excluded from all benefit of such real estate.

You are hereby notified that a Petition for Adoption has been filed with the Clerk of the Circuit Court of Jefferson County, West Virginia, and that you may serve upon Susan K. Paugh, Petitioner’s attorney, whose address is 314 West Stephen St., Martinsburg, WV, 25401, a responsive pleading to the Petition for Adoption on or before June 17, 2022. If you fail to do so default may be taken against you and your parental rights may be terminated.

The Issuing Office for the Bidding Documents is Corporation of Harpers Ferry – 1000 Washington Street, PO BOX 217 Harpers Ferry, WV 25425. Contact Person – Deb Kelly, dkelly@harpersferrywv.us. Prospective bidders may review solicitation and bid documents after registering for a vendor account at www.bidexpress.com. Fee is only required to submit bid. Bidders are required to obtain an Infotech Digital ID at www.bidexpress.com.

Implementation of P.L. 113-76, Consolidated Appropriations Act, 2014 applies an American Iron and Steel requirement to this project. All iron and steel products used in this project must be produced in the United States. The term “iron and steel products” means the following products made primarily of iron or steel: lined or unlined pipes and fittings, manhole covers and other municipal castings, hydrants, tanks, flanges, pipe clamps and restraints, valves, structural steel, reinforced precast concrete, and construction materials.

From 2003, Letone has always been committed to manufacturing rubber hose for 14 years, which provides high-grade and high-end rubber hose for the field of spaceflight and maritime industry, petroleum industry and highway, and PLA etc. Just as careful and elaborate rubber hose, LETONE has now become a high-tech enterprise integrating research, production, sales and services after years of steady development, shining brilliantly in the international market as an iconic enterprise among China"s rubber hose.

By 2016, Letone has built 4 world-class manufacture bases which cover a total area of over 80,000 m2, and accomplished an annual production value of RMB 5 billion.