what is a kelly hose free sample

additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

In an effort to prevent kinking, binding or snagging of kelly spinner hoses during the raising and lowering of said hoses together with a rotary hose in oil drilling rigs, it is known to tape the kelly spinner hoses to the rotary hose which provides the drilling fluid. There is a serious defect in this arrangement since the kelly spinner hoses and the rotary hose are used independently in the sense that they are under different pressures at different times. Thus, for example, the kelly spinner hoses will not be pressurized with air when the rotary hose is pressurized with the drilling fluid. Since the pressurization of the rotary hose is typically in the range of from four thousand to five thousand psi, the hose is substantially elongated typically from about six to ten inches. This results in substantial straining of the kelly hoses. By the same token the kelly hoses when they are pressurized, are strained due to the fact they are prevented from moving relative to the rotary hose. Further, these strains have a tendency to rupture the tape leaving the kelly spinner hoses free to move independently which is a serious hazard for rig personnel since, if one of these hoses ruptures or separates from the fittings attached to the kelly swivel it will whip violently incident to the exhausting of the high pressure air through the rupture or the freed end of the hose. All of these problems have been solved by this invention by providing guides for the kelly hoses which attach to the rotary hose and permit the kelly hose and the rotary hose to move freely axially relative to each other while preventing kinking, binding and snagging while the hoses are raised and lowered. In addition, the invention facilitates the installing and disconnecting the kelly spinner hoses. The life expectancy of the kelly spinner hoses is increased, reducing down time.

The invention is a safety guide for kelly spinner hoses in drilling rigs and a plurality of said safety guides in combination with kelly hoses and a rotary hose. Each safety guide comprises a pair of opposed rings, each adapted to receive and guide a kelly spinner hose, and a device for securing the rings to a rotary hose substantially in a plane perpendicular to the axis of the rotary hose. Advantageously, each ring has a rigid integral loop member and the securing device comprises a flexible band passing through said loop members. It is preferred to secure the band to the rotary hose with a buckle. In the combination, a plurality of the safety guides are spaced along the length of the rotary hose, preferably substantially equidistant.

FIG. 3 is an elevational view showing a guide in accordance with the invention in association with the kelly spinner hoses and the rotary hose of the rig of FIG. 1;

Referring to FIG. 1, an oil drilling rig 2 has a derrick 4 having a hoist 6 provided with a lifting hook 8 which is adapted to engage a ring 10 (FIG. 2) attached to a swivel fitting 12 which in turn is connected to a kelly indicated at 16 adapted to connect with a rotary table 18 (FIG. 1). A kelly spinner 20 rotates kelly 16 and is supported by a turn buckle 22 connected to swivel fitting 12.

A rotary hose 26 is connected by a fitting indicated at 28 (FIG. 2) to swivel fitting 12. Rotary hose 26 is connected to a stand pipe 30 which is adapted to deliver a drilling fluid as indicated at 32 (FIG. 1). Kelly spinner hoses 40 and 42 are connected to Kelly spinner 20 and are respectively connected to their delivery pipes 44 and 46 as indicated at 48 and 50 (separated for clarity in FIG. 1, but actually close to fitting 32).

Kelly spinner hoses 40 and 42 are each guided by a plurality of guides 60 in accordance with the invention which are substantially equally spaced along the length of rotary hose 26.

As best seen in FIG. 4, each guide 60 has a pair of opposed guide rings 62 and 64 through which hoses 40 and 42 pass respectively. Guide ring 62 has an integral member loop member 66 which runs substantially perpendicular to a plane through ring 62 and has a relatively narrow opening 68 (FIG. 3). Likewise, guide ring 64 has an integral loop member 72 running substantially perpendicular to the plane of ring 64 and having a relatively narrow opening 74.

A band 78 passes through openings 68 and 74 and around rotary hose 26 to which it is tightly secured by buckle 80. Buckle 80 has a flat plate 82 to which is secured a loop 84 (FIG. 5) and outwardly and downwardly extending opposed fingers 86, 86. The inner end 90 of band 78 passes between plate 82 and loop 84 and between back plate 82 and fingers 86, 86 and is bent back on itself inside of plate 82. Band 78 is then run around rotary hose 26 twice passing through loop members 66 and 72 and between plate 82 and both loop 84 and fingers 86 twice to form two loops indicated at 96 and 98 in FIG. 4 and then outer end 92 is turned back on itself over loop 84 and passed inside of fingers 86, 86 thus securing the rings 62 and 64 to rotary hose 26 (FIGS. 4 and 5).

The guides 60 are substantially equally spaced along hose 26 advantageously at a distance of from about 96 to about 144 inches. It will be seen that since the kelly spinner hoses 40 and 42 are loosely received in guide rings 62 and 64 each of the hoses 40, 42 and 26 can move freely axially relative to each other. Should one of the hoses 40 or 42 become detached from the kelly spinner it will be prevented from dangerous whipping. While a variety of materials may be used to make the guides 60, it is preferred to employ stainless steel for all the parts. The guide rings 62 and 64 are conveniently welded to loop members 66 and 72 as indicated at 100 and 102 respectively in FIGS. 3 and 4.

A large-diameter (3- to 5-in inside diameter), high-pressure flexible line used to connect the standpipe to the swivel. This flexible piping arrangement permits the kelly (and, in turn, the drillstring and bit) to be raised or lowered while drilling fluid is pumped through the drillstring. The simultaneous lowering of the drillstring while pumping fluid is critical to the drilling operation.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

The main advantage of a kelly hose is that it helps you move water from one point to another without much struggle. Hose pipes are also versatile and can be used for various activities in your home or at your workplace. Moreover, rubber horse pipes are durable since rubber is a strong material. This means that you won’t need to replace it often. Additionally, rubber hoses are less prone to cuts and abrasions. Another advantage of this hose pipe is that it absorbs shocks and vibrations. Also, there is no need for specialized bending or brazing since it can bend easily. Lastly, it reduces pressure surges and lubricates itself.

When buying a kelly hose, there are several factors that you need to consider, including length, couplings, thickness, and price. The length of the kelly hose is an important factor to consider. If you are taking the water to the furthest corner of your compound, consider getting a longer pipe for convenience. Also, if you are watering a large garden, a longer pipe will serve you better. Couplings or horse pipe fittings are also another important consideration. These are the accessories that help you connect your pipe to the water source. They can either be made from brass or plastic. Some people prefer plastic couplings since they are lightweight, but they can break easily. Brass fittings are heavier but long-lasting. Lastly, consider the thickness of the pipe. This refers to the number of layers used to make the kelly hose. Thickness determines the weight of the pipe and ease of bending.

For a wholesale kelly hose, visit Alibaba.com. This online shopping platform offers a wide range of rubber hoses that suits your needs. Visit the website at any time and place your order.

I’ve been in the cleaning business since 1985 and I’ve used many different brands of hose. Nothing comes close to the quality of Amflex vacuum hose. Don’t use anything else!

Joe advised trying these and I couldn"t be happier. The 2.5 size really made short work of the larger tasks and the variety of colors makes it easier to keep the jobs seperate.

Love this hose, so much more flexibility and was able to got rid of my 8 ft 1.5 in lead line , which allowed for better suction and better dry times. So glad I found it.

Great hose; buy elsewhere and Thank me later also, shipping was a joke. 10days to "prepare" and another 5 days to ship. Ordered my hose over a month ago and won"t receive til later on in the week

Been using prochem vacuum hoses for years now. Immediately noticed a significant increase in suction with this hose on a Legend GT. I never thought a different brand hose would make a difference, but it definitely does.

Joe, I have been cleaning for 27 years and I have to fess up, I was skeptical of your sales pitch on this hose. But, now that I have it and have been using it for nearly two weeks I have to say, hands down it is the very best. I love it. Thanks for supplying great products Joe. Keep it going. Best regards. Chris Graves - Advanced Carpet & Tile Care

No! Just got a 100" of the greenish colors(can"t remember the name), used the first time in 100" hose run- dang, I can tell the difference in the suction! When joe talks about the "less air restriction inside" he"s not kidding.

I chose the purple hose to match my company colors. I purchased the hose over a year ago and I"ve had zero issues to date. I will definitely purchase this hose in the future.

Jeff Brockhaus likes the superior flexibility and high temperature capability of Joe"s vac hoses, and prefers using a variety of colors so they are easy to sort out of a large stack or pile.

I had some very old vac hose probably 15 ish ys old. I was getting tired if the kinks and decided to pull the trigger on the lil better vac hose. I was impressed right from the beginning !! Great hose and a great price !!

Only thing I dont care for is that it is very very rigid. I"m sure that is 1 reason why the vac power is better. Also after about 6 months of use it is just like brand new and hold up extremely well!

After asking my local wholesaler if I could get some green suction hose, although being in the industry for decades he said he was unable to get me green suction hose. Here comes Joe to the rescue, I asked if he could get me Green suction hose, he said "What size and hue of green?" He delivered when others couldn"t and the hose quality is second to none. His prices are competitive and his delivery process and service was very quick!!! Bravo Joe!!

Man, this vacuum hose is the way to go! is soft and yet super resistant. I can see it lasting for MANY years to come. Well built. Definitely recommend . Shipping was extremely fast as well. I"m happy with the overall experience and product

I"ve been buying vacuum and solution hoses from Wanders for over 5 years now. The Lil" Better vacuum hoses are gret. They"re very flexible and easy to maneuver around. They don"t break like others and still look good after being dragged across driveways and concrete. I definitely recommend trying it out.

We have been using hose from Wanders Products for YEARS. Its super reliable, doesn"t kink unless you"re being stupid with it. I have tried other hoses that would come with new machine setups and they never compare to lil" better hose. My only regret was not getting one of the cool colors available, I went with the standard gray that was already on my Butler. I should have went with Saigers blue and orange. Next time.

This hose is great. Very flexible even in the cold. Solid 100’ length definitely help increase vacuum. The color is great and matches uniforms and the truck wrap.

We’ve been using this hose for many years and it’s well worth the money. It’s so easy and manageable to use. So easy to pull out and set up and take down. We have around 1000 ft.

Bought the 2½" Vac Hose in Jan 2020 have been using it since, I have a BluelineThermal Wave II machine, The hose i was thinking going to be very stiff going around corners and such items similar not really any different there , People can see the hose Better in their home. TOOK a little while to get used to the LARGER NEW size and the added weight in carrying it into the home. After a month or so you don"t really notice it any more. What Real Difference i have Noticed the carpets are Drying Faster and im getting better recovery using the 2½" hose over the the old 2" hose Customers have even Commented on the Fact that the carpet is almost dry when I leave the home . .

If you are looking at Lil Better Vac Hose then your in need and stop looking and Buy! You wont regret it! Hose holds up great and is flexible. Great quality and bought 100ft and can guarantee I be back for another 100!

I"ve ordered and used 2" and 2.5" "LIL Better" hose from Joe over the years... I have to say it holds up better than any other hose i"ve had in the past... I"m working on 5 years with same hose on one my vans right now NO cracking, No Breaking, NO leaking. Which is very import! Us professional carpet cleaners don"t have time to be cutting and fixing the hoses on the job! The crazy thing is even the outside of hose still looks GREAT after dragging hose over dirt, cement, black top, roads... I"m a firm believer you get what you pay for! Very fairly priced too!

I got tired of the hoses that "came with" my truckmount collapsing and kinking around corners, over railings, etc. When I started sucking up hot dirty water, the hoses failed miserably. They were firm until heat was applied.

The Lil-Better vac hose that I bought from Joe has been on my hosereel for many years now, and is holding up great, doesn"t get soft when performing high heat recovery jobs.

Love the lil better vacuum hose have over 1000 feet. Awesome colors, lightweight, excellent unobstructed airflow and great price. Compared Two other brands, LiL Better is much better!!!!!

We"ve been using this hose for a few years now, and it is the only hose we buy now. Hose performs great, shipping has always been fast. I am very satisfied with this product.

My Name is Rex Farr of F&C Cleaning Systems out of up state NY .I love Joe’s vac hose. We’ve been using his hose for years. We’ve probably gotten 1500-2000’ over the years. Why do we buy well it’s simple. 1-you can pick any color pretty much.2- it bends farther then most before it kinks on you. 3- you can buy it in 2”&2.5”. 4- Joe stands by what he sells. At least he always has with me. I think in the 20 years buying from Joe I maybe had 1 or 2 things he had to resend replacements. I think people freak out if something goes wrong and blame Joe . I my book if you take care of the problem there is no problem. Fact is Joe sells great products that work. Like him or don’t his products work. People need to stop talking so much and work more.

We have purchased these hoses for several of our vans. We allow our techs to choose their own colors (initially why we chose wanders products) but when these hoses arrived, they are durable AND flexible. We use flash cuffs and they fit very well on these hoses. (Flash cuffs don’t fit well on all brands of hoses)

The customer service is great and communication is easy. We have and do recommend wanders to anyone who is in the carpet industry, and our neighbors who have pools.

The Lil" Better Vac hose is awesome right out of the box... thicker, yet more flexible and easy to work with than any of the hoses I"ve purchased from JD within the last 20 years. On top of that, the selection of multiple hose colors to fit your brand is an awesome touch. Joe is always available for a chat, and Wander"s customer service in general far exceeds any other supplier I"ve dealt with. You can"t go wrong here, and I"ll proudly be a customer for life.

I got 500 feet of your Lil Better Vac Hose with the Blue and Red Saiger colors then I wrapped my new van to match it. Looks so sharp! I"ve been cleaning since 1975 and I"m not kidding, between your stuff and my new Butler, this is the best thing that"s ever happened to us. I"m telling everybody I know about you...if anybody who wants to know, have them call me, 781 820-9792. Thank you so much!

I"ve bought the 2.5", 2" & 1.5" and we love them! They are light and flexible, this is our go to hose. Joe"s High Heat solution hose is a must have as well.

I have purchased more than a thousand feet of Lil Better Vac Hose. I started using Butler vans back in 2011. It came with hose on the reel. We immediately changed it out to Lil Better and have never looked back. The hose Butler provided was so much stiffer and heavier. We order our new Butlers with no hose! Lil Better provided flexibility to roll it up into a small space, but it is still very durable. Could not be happier with it. Cool Cuffs are easily screwed on to the hose ends to create the best vacuum system you can buy. Need more info call me personally. Jim 919-362-1054

If Wiktionary has a definition already, change this tag to {{TWCleanup2}} or else consider a soft redirect to Wiktionary by replacing the text on this page with {{Wi}}.

If Wiktionary does not have the definition yet, consider moving the whole article to Wiktionary by replacing this tag with the template {{Copy to Wiktionary}}.

Multiple layers of polyester cord over tube. Multiple layers of "close wound", high tensile steel cables, with one layer of adhesion fabric placed between cable layers. Multiple layers of reinforcement under cover.

Example: "Gates® Black Gold® Rotary Vibrator 3 Inch Max WP 7500 PSI API SPEC 7K Tested To 15000 PSI Grade E FSL 1 Temp Range 1 ISO 14693 License 7K-0003 Made In U.S.A."

A large valve, usually installed above the ram preventers, that forms a seal in the annular space between the pipe and well bore. If no pipe is present, it forms a seal on the well bore itself. See blowout preventer.†

The space around a pipe in a well bore, the outer wall of which may be the wall of either the bore hole or the casing; sometimes termed the annular space.†

One or more valves installed at the wellhead to prevent the escape of pressure either in the annular space between the casing and the drill pipe or in open hole (for example, hole with no drill pipe) during drilling or completion operations. See annular blowout preventer and ram blowout preventer.†

A blowout preventer that uses rams to seal off pressure on a hole that is with or without pipe. It is also called a ram preventer. Ram-type preventers have interchangeable ram blocks to accommodate different O.D. drill pipe, casing, or tubing.†

A heavy, flanged steel fitting connected to the first string of casing. It provides a housing for slips and packing assemblies, allows suspension of intermediate and production strings of casing, and supplies the means for the annulus to be sealed off. Also called a spool.†

A pit in the ground to provide additional height between the rig floor and the well head to accommodate the installation of blowout preventers, ratholes, mouseholes, and so forth. It also collects drainage water and other fluids for disposal.†

The arrangement of piping and special valves, called chokes, through which drilling mud is circulated when the blowout preventers are closed to control the pressures encountered during a kick.†

A centrifugal device for removing sand from drilling fluid to prevent abrasion of the pumps. It may be operated mechanically or by a fast-moving stream of fluid inside a special cone-shaped vessel, in which case it is sometimes called a hydrocyclone.†

A centrifugal device, similar to a desander, used to remove very fine particles, or silt, from drilling fluid. This keeps the amount of solids in the fluid to the lowest possible level.†

A small enclosure on the rig floor used as an office for the driller or as a storehouse for small objects. Also, any small building used as an office or for storage.†

The hoisting mechanism on a drilling rig. It is essentially a large winch that spools off or takes in the drilling line and thus raises or lowers the drill stem and bit.†

The cutting or boring element used in drilling oil and gas wells. Most bits used in rotary drilling are roller-cone bits. The bit consists of the cutting elements and the circulating element. The circulating element permits the passage of drilling fluid and uses the hydraulic force of the fluid stream to improve drilling rates.†

A heavy, thick-walled tube, usually steel, used between the drill pipe and the bit in the drill stem. It is used to put weight on the bit so that the bit can drill.†

The heavy seamless tubing used to rotate the bit and circulate the drilling fluid. Joints of pipe 30 feet long are coupled together with tool joints.†

A wire rope hoisting line, reeved on sheaves of the crown block and traveling block (in effect a block and tackle). Its primary purpose is to hoist or lower drill pipe or casing from or into a well. Also, a wire rope used to support the drilling tools.†

On diesel electric rigs, powerful diesel engines drive large electric generators. The generators produce electricity that flows through cables to electric switches and control equipment enclosed in a control cabinet or panel. Electricity is fed to electric motors via the panel.†

A large, hook-shaped device from which the elevator bails or the swivel is suspended. It is designed to carry maximum loads ranging from 100 to 650 tons and turns on bearings in its supporting housing.†

The heavy square or hexagonal steel member suspended from the swivel through the rotary table. It is connected to the topmost joint of drill pipe to turn the drill stem as the rotary table turns.†

A device fitted to the rotary table through which the kelly passes. It is the means by which the torque of the rotary table is transmitted to the kelly and to the drill stem. Also called the drive bushing.†

A portable derrick capable of being erected as a unit, as distinguished from a standard derrick, which cannot be raised to a working position as a unit.†

The derrickman"s working platform. Double board, tribble board, fourable board; a monkey board located at a height in the derrick or mast equal to two, three, or four lengths of pipe respectively.†

Shallow bores under the rig floor, usually lined with pipe, in which joints of drill pipe are temporarily suspended for later connection to the drill string.†

A series of open tanks, usually made of steel plates, through which the drilling mud is cycled to allow sand and sediments to settle out. Additives are mixed with the mud in the pit, and the fluid is temporarily stored there before being pumped back into the well. Mud pit compartments are also called shaker pits, settling pits, and suction pits, depending on their main purpose.†

A trough or pipe, placed between the surface connections at the well bore and the shale shaker. Drilling mud flows through it upon its return to the surface from the hole.†

A diesel, Liquefied Petroleum Gas (LPG), natural gas, or gasoline engine, along with a mechanical transmission and generator for producing power for the drilling rig. Newer rigs use electric generators to power electric motors on the other parts of the rig.†

A hole in the rig floor 30 to 35 feet deep, lined with casing that projects above the floor. The kelly is placed in the rathole when hoisting operations are in progress.†

Shallow bores under the rig floor, usually lined with pipe, in which joints of drill pipe are temporarily suspended for later connection to the drill string.†

A mud pit in which a supply of drilling fluid has been stored. Also, a waste pit, usually an excavated, earthen-walled pit. It may be lined with plastic to prevent soil contamination.†

The hose on a rotary drilling rig that conducts the drilling fluid from the mud pump and standpipe to the swivel and kelly; also called the mud hose or the kelly hose.†

The principal component of a rotary, or rotary machine, used to turn the drill stem and support the drilling assembly. It has a beveled gear arrangement to create the rotational motion and an opening into which bushings are fitted to drive and support the drilling assembly.

A series of trays with sieves or screens that vibrate to remove cuttings from circulating fluid in rotary drilling operations. The size of the openings in the sieve is selected to match the size of the solids in the drilling fluid and the anticipated size of cuttings. Also called a shaker.†

Wedge-shaped pieces of metal with teeth or other gripping elements that are used to prevent pipe from slipping down into the hole or to hold pipe in place. Rotary slips fit around the drill pipe and wedge against the master bushing to support the pipe. Power slips are pneumatically or hydraulically actuated devices that allow the crew to dispense with the manual handling of slips when making a connection. Packers and other down hole equipment are secured in position by slips that engage the pipe by action directed at the surface.†

A relatively short length of chain attached to the tong pull chain on the manual tongs used to make up drill pipe. The spinning chain is attached to the pull chain so that a crew member can wrap the spinning chain several times around the tool joint box of a joint of drill pipe suspended in the rotary table. After crew members stab the pin of another tool joint into the box end, one of them then grasps the end of the spinning chain and with a rapid upward motion of the wrist "throws the spinning chain"-that is, causes it to unwrap from the box and coil upward onto the body of the joint stabbed into the box. The driller then actuates the makeup cathead to pull the chain off of the pipe body, which causes the pipe to spin and thus the pin threads to spin into the box.†

A vertical pipe rising along the side of the derrick or mast. It joins the discharge line leading from the mud pump to the rotary hose and through which mud is pumped going into the hole.†

A rotary tool that is hung from the rotary hook and traveling block to suspend and permit free rotation of the drill stem. It also provides a connection for the rotary hose and a passageway for the flow of drilling fluid into the drill stem.†

The large wrenches used for turning when making up or breaking out drill pipe, casing, tubing, or other pipe; variously called casing tongs, rotary tongs, and so forth according to the specific use. Power tongs are pneumatically or hydraulically operated tools that spin the pipe up and, in some instances, apply the final makeup torque.†

The top drive rotates the drill string end bit without the use of a kelly and rotary table. The top drive is operated from a control console on the rig floor.†

What"s a royalty-free license?Royalty-free licenses let you pay once to use copyrighted images and video clips in personal and commercial projects on an ongoing basis without requiring additional payments each time you use that content. It"s a win-win, and it"s why everything on iStock is only available royalty-free — including all Drill images and footage.What kinds of royalty-free files are available on iStock?Royalty-free licenses are the best option for anyone who needs to use stock images commercially, which is why every file on iStock — whether it’s a photo, illustration or video clip — is only available royalty-free.How can you use royalty-free images and video clips?From social media ads to billboards, PowerPoint presentations to feature films, you"re free to modify, resize and customize every asset on iStock — including all Drill images and footage — to fit your projects. With the exception of "Editorial use only" photos (which can only be used in editorial projects and can"t be modified), the possibilities are limitless.