pentair mechanical seal made in china

Structural Features: double-end, multiple springs, with spring protector, balanced, independent direction of rotation, spring standing mechanical seal. The component is cartridge seal with easy installation. The springs are not touching the sealed mediums so that there will be no jam caused by the high viscosity and crystallization active content. This makes sure the flexibility of the compensation ring and as a result, it lasts the lifetime of the whole component. Multi spring structure makes the load on the sealing faces balanced. The seal needs to work with sealing water, which has the pressure of 0.1 - 0.3 MPa and flow rate of 3 - 8 L/min.

Scopes of Application: mainly used in chemical engineering, pulp production, pulp drying, pulp screening, and sewage treatment. Designed for pressure screens and other filters. This component can work as an alternative to ANDRITZ SafeMatic seal support system.

Designed to provide continuous lubrication to mechanical seals in conditions when pump must run dry for several hours, may suddenly lose prime, without being shut off, or requires extended time for priming.

DRY-RUN Gland Surrounds shaft; channels a continuous flow of lubricant to shaft and mechanical seal to cool and minimize friction. Mounts in both CW and CCW pump configurations.

Lubricant Reservoir Supplies lubricant to the DRY-RUN Gland through pumping action created by rotating shaft. Circulating lubricant transfers heat away from shaft & seals to the reservoir.

2. The sealing cavity of the equipment should be kept clean during installation, the sealing parts should be cleaned, and the sealing end face should be intact to prevent impurities and dust from being brought into the sealing part;

3. It is strictly forbidden to knock or knock during the installation process, so as not to damage the mechanical seal due to friction and seal failure;

Springer Parts carries Turbine Pump Seal Replacements, Seal Components, and Seal Upgrades. We also carry Turbine Pump Seal Repair Kits for many brands, including AMT®, Berkley®, Goulds®, Franklin Mth Tool Co.®, National Pump®, Peerless®, Red Jacket®, And Roth®. Our OEM and aftermarket Seal Replacements, Components, and Upgrades are competitively priced, typically 20-40% less than OEM. Performance specifications and warranty meet or exceed OEM.

We offer the most common seal and seal component parts, such as Mechanical Seals, Static Seal Faces, Rotating Seal Faces, Springs, O-Rings, and Elastomers.

Turbine Pumps can be used in a wide variety of applications. They are particularly well suited to clear liquid applications with high head, low flow requirements and benefit from a compact design and flexible operation. Many are used in applications such as cooling water circulators for lasers and other machines where high head is required and more. Our Turbine Pump seals are in stock and cost less than the OEM Parts. They offer the same quality and support that the OEM provides.

Turbine Pump seals are often not specified correctly when first purchased, or they are bought second hand, and their initial Bill of Materials is not ideal for the new application. Springer Parts has been working with seals for decades, and we not only have the right parts but the knowledge needed to get you the right parts. We can also help identify if seal faces are failing faster than they should be and make proper suggestions for a better replacement or upgrades.

Don"t feel like scrolling pages looking for the correct seal or seal component? Use our search with a full or partial part number. Stuck identifying a part or the pump it goes to? HERE

Bergman can offer high quality products ata competitive price, thanks to the 20 years of experience. A warehouse of 5,000square meters and 50,000 spare parts ready in stock guarantee a delivery timeof 5 days for standard seals. Moreover, Bergman can also produce mechanicalseals according to customers’ requests. During the years, Bergman has producedmore than 200 types of non-standard mechanical seals.

We are a manufacturer. All seals have bulk inventory and can be shipped to you quickly. We promise to ship you in small quantities within 3 days.Advanced technology, excellence, replace original

3. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT.

4. Broad range of mechanical seals compatible with Flygt® and Grindex® waste water pumps. These mechanical seals are characterized by their easy and fast installation, without having to make any modification to the pump. Manufactured in stainless steel and in solid tungsten carbide. Special tools are not necessary for their installation.

6. Mechanical seals for all types of Calpeda® pumps: centrifugal pumps, multistage, submersible. Different models of mechanical seals in a wide range of materials.

7. Mechanical seals compatible for APV® pumps, among them: Puma, ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some designs with wave spring like the special seals for APV Howard® pumps and Crepaco Clean Line®. All of them have been manufactured in materials suitable for working with fluids such as juices, milk and drinks in general.

9. Different models of mechanical seals compatible for Alfa-Laval® pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the range of lobular SSP and SR pumps. Mechanical seals in different combination of materials tungsten carbide, silicon carbide, graphite; combined with different types of elastomers: NBR, EPDM and FKM.

10. Mechanical seals for ABS® submergible pumps specific wastewater treatment. Different models of mechanical seal available: oil chamber mechanical seal and water mechanical seal.

2. The sealing cavity of the equipment should be kept clean during installation, the sealing parts should be cleaned, and the sealing end face should be intact to prevent impurities and dust from being brought into the sealing part;

3. It is strictly forbidden to knock or knock during the installation process, so as not to damage the mechanical seal due to friction and seal failure;