goulds pump mechanical seal quotation

Replacement seals for GOULDS PUMPS® Mechanical Seals products. Search by the OEM Part Number using the SEARCH function at the top of the page or use search by specification.

OEM names, brands, model or part numbers are for identification purposes only. Our components are designed to provide performance and service life equal to or better than the OE part when properly installed and properly applied. Springer Parts® carry a warranty equal to the OE component. GOULDS PUMPS® Mechanical Seals is a registered trademarks of its respective company. Springer Pumps, LLC is not a representative of, nor affiliated with GOULDS PUMPS® Mechanical Seals.

Springer Pumps, LLC is pleased to offer our clients Springer® Parts! Springer® Parts are replacement pump parts, pump replacement kits and replacement mechanical seals. SPLLC proudly offers them 20% - 40% below OEM.

Product images shown are for illustration purposes only and may not be an exact representation of the product you will receive. IMS Supply is not an authorized distributor, reseller or representative of Goulds Pump. All product names, trademarks, brands and logos used on this site are the property of their respective owners and are used for identification purposes only.

Terms: prices are quoted are "each" (unless stated otherwise) and FOB point of origin with no freight allowed freight ships via common ground carrier, and inside continental US Only - any special shipping requirements to be responsibility of purchaser. We offer all prices less tax, with a validity of 30 days from the date quoted and all sales are final. Once items have shipped and left the warehouse National Pump Supply is not responsible for any damage caused during the shipping process. You must contact the shipper directly and file a claim with the shipping company.

Mechanical seals form a critical part of any mechanical operation involving fluid movement through rotational shafts, such as in the case of pumps. These seals ensure that the fluid does not leak out of a closed system and contaminants do not enter the system. In pumping applications, mechanical seals are placed at the point of entry or exit of a rotating shaft, preventing the pressurized fluid from escaping the pump housing and withstanding the friction generated from the shaft rotations.

Mechanical seals are devices that accommodate a rotating shaft while containing and preventing the fluid from leaking out of the enclosed housing. While different mechanical seal designs are available for pumping applications, most have three sealing points.

These three sealing points ensure that the fluid contained within the pump housing does not leak while also preventing dust particles in the atmosphere from entering the housing.The mechanical seals are usually made up of different materials to prevent sticking. Typically, one side of the seal uses softer materials like carbon graphite, and the other is made of harder materials such as silicon carbide or ceramic alumina. However, hard materials are preferred for both surfaces if the pumping application involves abrasive fluids.

In addition to the two materials, the sealing unit also comes with O-rings to seal the stationary face on the housing side and the rotating face on the shaft side. Springs are also used to keep both faces pressed.

In most cases, the two faces of the seals are also lubricated to prevent friction and wear. Depending on the application, this fluid film can either be a separate lubricant or the process fluid itself.

Mechanical seals can be selected based on the type of pump application. Choosing the wrong seal can affect pump performance and lead to damage and costly repairs.An unbalanced mechanical seal is preferred if the pump needs to operate at a lower pressure. However, high pressure pumping applications require balanced mechanical seals. Balanced seals also perform better in high temperature operating conditions. Cartridge seals require less maintenance but are more expensive, hence used for limited applications.

At Hayes Pump, we have a fully staffed, factory-trained parts department to help you quickly with the correct mechanical seal for your pump. You canrequest a quotefor your part orcontact usto get further assistance.

For over 35 years, Hudson Pump & Equipment, a division of Tencarva Machinery Company, has served many different industries as a distributor of pumps, fluid power equipment, rotary vane and liquid ring vacuum pumps and systems in Florida from locations in Lakeland and Jacksonville.