burgmann mechanical seal brands

Qseals is your one-stop-shop for supplying and refurbishing all your Burgmann seals. Almost all Burgmann seals can directly be supplied from stock in all common sizes and face material and elastomer combinations.

There are currently 159 Burgmann typenumbers registered within our custom database.For all of these Burgmann numbers there are currently 1113 suited alternatives from other brands, for at least 1295 different applications, known to us.In other words, we have probably come across your specific situation or problem before. We gladly help you with advice without any obligations.

If your Burgmann seal can still be refurbished Qseals can also assist you with this. Read more about mechanical seal refurbishment.

EagleBurgmann Company was founded in 1884 and is currently one of the market leaders in industrial sealing technologies. At the international level, EagleBurgmann is represented by 48 subsidiaries, 89 service centers and a dense dealer network. The product range includes:

Flexaseal offers replacement seals for a full array of compressors, mixers, pumps, and other rotating equipment. Direct replacements are available in standard inch and metric sizes and materials for major brands, including John Crane®, EagleBurgmann®, Pac Seal™, U.S. Seal Mfg™, and Flygt®. Replacements for custom designs are available on request.

The SEPCO RBD is a stationary design multiple spring double seal used where leakage of hazardous or costly products cannot be tolerated and where positive ...

Dual seal Available for standard (CMS-ASDN) and big bore (CMS-ABDN) seal chambers Balanced Cartridge Double pressure balanced Independent of direction of rotation Integrated pumping device

We manufacture face seals for hydraulic and pneumatic applications in the following designs:- rod seals and piston seals - single-acting - double-acting - rotatory ...

Mechanical seals are an important part of the pump. High quality mechanical seals reduce the frequency of pump maintenance. Our state-of-the-art equipment and rigorous machining make the mechanical seal (1) more resistant to oil, (2) pressure, (3), wear resistant, (4) elastic and high strength.

ROTA-TECH offers Burgmann mechanical seal and replacements. Standard metric sizes are in stock and specials are available upon request. For Technical data on our Burgmann Replacement Seals, including dimensions and material information, please navigate the buttons below to view our electronic catalog.

We also manufacture and supply KSB Pump Seals, Flowserve Pump Seals, Grundfos Pump Seals, Kirloskar Pump Mechanical Seals, John Crane Seals and  as being top most replacement  mechanical seal manufacturers in Mumbai as well as known as one of the most precise replacement seal manufacturing companies in India.

We recognize and understand the vital role of eagle burgmann mechanical seals in their application. With purposes including securely fastening components within systems, and contaminants prevention such as gases and liquids from navigating through enclosed and sealed areas. That is why we offer wholesale eagle burgmann mechanical seals in different variations and diversities to ensure the integrity and efficiency of systems they will be applied to will function successfully and optimally. The different seals" types available include static that does not move along with other seals and dynamic seals that move collaboratively.

Depending on the industry and selected purpose, we consider eagle burgmann mechanical seals requirements. Requirements are like pressure, that is pressure changes, to ensure they can withstand and do not deform by the sealed fluid, the load and how it can withstand deflection, dynamics such as the alignment and vibration, and temperature covering the environmental conditions and the heating arising from the friction of the seal operation and fluid movement.

The seals are either bolts, nuts, or washers. Seal bots are commonly used because of their benefits in being reusable, preventing fluids and contaminants from escaping even under high pressure. Nuts are essential on temperature withstanding and compatibility with screws, studs, and bolts, in addition to, easy installation. Moreover, washers can withstand high pressures and are compatible with other seals.

If you are in need of an ASI©seal replacement, Gaddis Mechanical Seals is here to help. We offer replacement mechanical seals for a variety of applications, and our team is highly experienced in mechanical seal repair and installation. We understand the importance of keeping your machinery running smoothly, and we will work diligently to get your mechanical seals repaired or replaced as quickly as possible. With ASI© Mechanical Seals, you can rest assured that your mechanical seal repair needs will be handled promptly and professionally. Contact us today to learn more about our mechanical seal repair services.

Direct replacement mechanical seals suitable for BURGMANN® BT-AR, AESSEAL® B01, JOHN-CRANE® Type-6A, FLEXIBOX® PR-DR, VULCAN® Type-18 and other usual manufacturers.

Rubber bellow mechanical seal, unbalanced, single spring, independent rotation and short length. AT metallic parts are AISI-304 and AT2 metallic parts are AISI-316. (*)

We have available seal materials to suit chlorinated water pools and seawater pool (with salts). Sealing materials, metallurgy & elastomers are not compatible for both media. (*)

Direct replacement mechanical seals suitable for BURGMANN® BT-PN, and other manufacturers. Rubber bellow mechanical seal, single-spring, and short design. Suitable for pool pumps. (*)

Direct replacement mechanical seals suitable for JOHN CRANE® type-2100, AESSEAL® B05 or B052, VULCAN® type-14 or type-142 and other usual manufacturers.

Direct replacement mechanical seals suitable for JOHN-CRANE® type-1A, BURGMANN® MG910-D1, AESSEAL® P01, VULCAN® type-10 and other usual manufacturers.

Direct replacement mechanical seals suitable for JOHN-CRANE® & SEALOL® type-675, FLEXASEAL® Style 40/42/60, AESSEAL® BSAI and other usual manufacturers.

Double mono-block mechanical seal back-to-back execution, multi-spring, and bi-directional. To avoid atmospheric emissions by pressurized barrier fluid. (API PLAN 53A), suitable for toxic, corrosive and dangerous liquids. (*)

(**) COSGRA Company don’t have any relation with the brands: JOHN-CRANE®, BURGMANN®, SEALOL®, FLEXASEAL®, AESSEAL®, FLUITEN®, VULCAN® & FLEXIBOX®. Which are mentioned for orientation only, according the right of citation.

BTS Engineering offers replacement of OEM seals of pump equipment manufacturers and well-known brands such as John Crane®, EagleBurgmann®, AESSEAL, Roten, NIPPON PILLAR, Chesterton, Latty, Corropac, STERLING, SEPCO, Anga, Flowserve, Vulcan, M. T. U. Europa, Sealol, Roplan, US Seal Mfg™, Fluiten, Pac Seal™, Tekhniseal, etc.

More than 8,000 mechanical seals are available for the entire range of compressors, mixers, pumps and other rotating equipment with standardized dimensions and various characteristics to meet the seal needs that you need right now. The use of BTS Engineering mechanical seals reduces equipment maintenance costs and saves on reducing downtime. We maintain the highest value in the company – customers always come first!

It is hard to believe that almost 30 years have passed since the mass promotion of sealless pump technology into the process industry. The new technology was promoted as the solution to all the issues and perceived limitations of mechanical seals. Some suggested that this alternative would eliminate the use of mechanical seals entirely.

However, not long after this promotion, end users learned that mechanical seals could meet or exceed legislated leakage and containment requirements. Further, pump manufacturers supported the technology by providing updated seal chambers to replace the old compression packing “stuffing boxes.”

Today’s seal chambers are designed specifically for mechanical seals, allowing for more robust technology in a cartridge platform, providing easier installation and creating an environment that allows the seals to function to their full potential.

In the mid 1980s, new environmental regulations forced the industry not only to look at containment and emissions, but also at equipment reliability. The average mean time between repair (MTBR) for mechanical seals in a chemical plant was approximately 12 months. Today, the average MTBR is 30 months. Currently, the petroleum industry, subject to some of the most stringent emission levels, has an average MTBR of more than 60 months.

Mechanical seals maintained their reputation by demonstrating the ability to meet and even exceed the requirements of best available control technology (BACT). Further, they did so while remaining an economical and energy efficient technology available to meet emission and environmental regulations.

Computer programs allow seals to be modeled and prototyped prior to manufacturing to confirm how they will handle specific operating conditions before being installed in the field. Seal manufacturing design capabilities and the technology of seal face materials has progressed to the point that they can be developed for a one-to-one fit for a process application.

Today’s computer modeling programs and technology allow the use of 3-D design review, finite element analysis (FEA), computational fluid dynamics (CFD), rigid body analysis and thermal imaging diagnostic programs that were not readily available in the past or were too costly for frequent use with earlier 2-D drafting. These advancements in modeling techniques have added to the design reliability of mechanical seals.

These programs and technologies have led the way to the design of standard cartridge seals with much more robust components. These included the removal of springs and dynamic O-rings from the process fluid and made flexible stator technology the design of choice.