burgmann mechanical seal catalogue pricelist

Clean gas despite fluctuating operating conditions. The solution for preventing seal failures due to contaminated seal gas. Combined power cycle plant, Argentina.

Mechanical seals for agitators, mixers, dryers, kneaders and other special machines. The true all-rounders when it comes to aggressive, sticky or viscous media or when solids content is high.

Standardization of seals for over forty agitators from different manufacturers in an active ingredient production to dry-running agitator seal SeccoMix.

Main catalog seal supply systems. The complete product portfolio of systems and components for cooling, flushing, pressurization and supplying liquid and gas-lubricated mechanical seals e.g., quench and thermosiphon systems, heat exchangers, barrier fluid systems, leakage monitoring and seal supply systems in accordance with API682.

As versatile as the requirements of the oil and gas industry: Sealing solutions from EagleBurgmann for water and gas injection, midstrema processes, multiphase, FPSO, Subsea, oil sands mining and LNG.

As versatile as the requirements of the power industry: So are sealing solutions from EagleBurgmann in fossil fuel-fired, nuclear and renewable energy power plants.

Full range of EagleBurgmann products for Sohar refinery in Oman. Service agreement, mechanical seals for pumps and compressors, diaphragm couplings, compression packings and gaskets.

The innovative seal face coating for maximum operating performance of pumps, agitators and compressors in demanding applications. Features, applications and examples.

Introduction to state-of-the-art compressor seal technology, e.g. technical principle, basic seal arrangements and seal face coatings. Presentation of the complete EagleBurgmann range of dry gas seals, oil barrier seals and gas supply systems. References and services of EagleBurgmann.

Basic information about the API 682 4th edition. Contains a set of charts and summaries that gives a brief overview and represents a step-by-step method of specifying and selecting suitable EagleBurgmann sealing systems.

As versatile as the requirements of the refining industry: Sealing solutions from EagleBurgmann for distillation, cracking, gas processes, liquid and heavy hydrocarbons.

HR seals - the robust and economical solution for media with a high solids content. Advantages, products, operating conditions, references and finacial comparison.

Main catalog seal supply systems. The complete product portfolio of systems and components for cooling, flushing, pressurization and supplying liquid and gas-lubricated mechanical seals e.g., quench and thermosiphon systems, heat exchangers, barrier fluid systems, leakage monitoring and seal supply systems in accordance with API682.

* The John Crane and Flexibox trademarks are trademarks of their respective owners, and neither entity is affiliated with NE Seal Ind. Prod. LTD, its products, or its website, and does not manufacture, sponsor, or endorse its products.

Mechanical seals are indispensable for sealing rotating shafts. They make sure that the fluid handled remains in the system, prevent emissions and thus protect the environment from contamination. High-quality shaft seals in the form of mechanical seals also ensure maximum economic efficiency and operating reliability for pumps. This is crucial because the majority of repairs arise due to sealing problems.

And this is where KSB’s mechanical seals can make a difference: as well as impressing with a robust design, they offer straightforward installation and optimal integration in the seal chamber – ensuring reliable and efficient system operation.

identification by Cross-Reference , please refer to the on-line OEM database, or contact us with your requirements.Our Seals for Mission, SPP & Sihi Pumps

below. For a full listing of all Flygt® Pump models, along with the part codes for the Vulcan Mechanical Seal and ‘O’Ring Sets, please see the following two pages.

removable setting clip for easy installation. All Vulcan Type 06 Seals are stocked and fitted with optimal Nitrile elastomers and Carbon vs. T.C ( with an

For any Pump models not listed above, please contact us, as models continually evolve. For all Seals annotated with “i”, the part code shown for this model is the

performance, reliability and pro-longed operating life. Pre-set, easy to install, with no Pump modifications necessary. No plastic working Seal Parts, no

recommend the Type 06 Range for their greater Seal performance, capability and life. However, we also offer direct replacement like for like designs, as

For any Pump models not listed above, please contact us, as models continually evolve. For all Seals annotated with “i”, the part code shown for this model is the

to the Type 1653 but with an additional single-spring component Seal assembly to Seal the oilbath. For all Godwin® Pumps, please contact us with the OEM details for Cross-Reference and

Vulcan manufacture direct replacement rotary parts to replace the OEM ‘O’-Ring mounted, hydraulicallybalanced “Type-D” Seals fitted to Tri-Clover® brand centrifugal Pumps. Clamped stationaries with gaskets are

“9.611b” would be W-0220.V9611B.E.WF., where the 0220 denotes 22mm shaft size, E denotes EP ‘O’rings, and WF denotes Carbon vs Stainless Steel in a double Seal arrangement. The following illustrations only

identification by Cross-Reference , please refer to the on-line OEM database, or contact us with your requirements.Vulcan Seals to suit Grundfos® Hilge® Inoxpa® & Jabsco®

identification by Cross-Reference , please refer to the on-line OEM database, or contact us with your requirements.Vulcan Seals to suit G.E.A.® Tuchenhagen® Pumps

Saisi Mechanical Seal Co., Lid is specialized in manufacturing of high quality mechanical seals for pumps, mixers, compressors etc with over 20 years experience. We are committed to assist customers with the best sealing solutions at competitive prices.

The scope of our mechanical seal product range far exceeds any other seal manufacturer. From small elastomer bellows seals used in millions of domestic water pumps to double mechanical seals that ensure maximum sealing safety and large, highly customized dry-running gas seals for mission critical high speed turbo compressors, John Crane has the right product for any application.

The right seal support system is critical for promoting seal reliability. John Crane customizes support systems to meet a variety of seal specifications, contributing to safe, cost-effective, reliable operation and reducing harmful environmental effects. Our support systems comply with constantly changing design codes and standards, and meet the increasingly stringent demands on end users.

Our comprehensive suite of seal face technologies are designed to overcome rigorous sealing challenges, including limited seal face lubrication and severe-service duties that adversely affect reliability, operational costs and seal life. Designed by our engineering experts, John Crane’s face treatment options help your equipment power through low-lubricity and dry-running conditions by using advanced micromachined patterns and features to improve seal face lubrication to optimize the performance of rotating equipment in all process industries

Isomag’s advanced magnetic face technology delivers unparalleled performance. The lapped flat faces create a positive liquid tight seal preventing lubricant leakage and the ingress of contaminants in both static and dynamic conditions on horizontal and vertical equipment alike. By optimizing the magnetic energy loading, Isomag’s are capable of running at shaft speeds well above average (up to 15,000 feet per minute) providing the ability to effectively seal the bearing housings on a wide variety of applications

Do you want to minimize leakage from your pumps in an effective manner? This is a challenge operators and maintenance managers face on a daily basis, which can prove costly. John Crane offers a wide selection of packing materials in compression packing, automatic packing, floating packing, and injectable packing. Learn more about our variety of packing equipped to handle the vast majority of sealing solutions and available for nearly all applications.

The APILITE (R) mechanical seal is a new addition to the API 682 RDT cartridge seal family. It is designed for sealing heavy and light hydrocarbons, including VOCs, and other hazardous fluids at oil refineries and petrochemical plants, gas plants, and chemical plants. APILITE RDT seal is an o-ring dual seal to be used with API Plan 52, 53, or 54.

Minimized bending of seal rings allows for stable operation under higher pressures and for longer MTBR (mean time between repair) because of less wear;

Interchangeability of many parts and design solutions with the SD APITERM seal reduces inventory of spare parts, lets the seal survive under pump dry-running, and decreases prices by encreasing parts production volume;